For those of you that bought the thin magnetic sheets, I backed mine with cardboard and that made them just right. You do have to pay attention to which side you put down on the cardboard. put the dull side down, shiny side up.

@kimmorin7847

2 ай бұрын

I did the same with cardboard from cereal boxes and magnets hold really well! It's more work but magnetic sheets are expensive and so I found it worth it

I tape the thin magnetic sheet to thick cardstock. Using double sided tape.

Thanks for sharing!!

I cut two pieces of cardstock the same size as the magnets and glued them together. I don’t glue it to the magnet, just slip it underneath. I provides a lot of stability. I bought mine from Amazon and they are super thin too. Great haul! Temu dies are my absolute favorite, so much so that I had to put a halt on buying for a while! That’s ok, I have lots of toys to play with! Best of luck to you in your channel!

@sjcustomcreations

11 ай бұрын

Thank you!

I have bought many of the magnetic sheets. I back them with heavy cardstock and they work great!

The nesting dies look very small so pleased you showed them. They would be ok for very small cards or to put sentiments on tho

You showed a lot of dies I've been looking at. I hadn't seen the heart bow die. I really liked that foe a flat embellishing die. TFS!

Love your video & your card is so beautiful thank you so much for sharing. Looking forward to seeing what you do next. X ❤🇬🇧

@sjcustomcreations

9 ай бұрын

Thanks for watching

It's great to see it made up 😊

I am so addicted to this channel!!! Mainly because things are so inexpensive. I haven't had much luck with clothing, but that's what thrift shops are for! LOL, now I have a little tip for you on the magnets. Yes, they are a little thin and flimsy. what I do is glue a piece, the backing from paper pads on the back, it makes them more durable, and it saves a lot of money. magnets are expensive. I look forward to seeing what you come up with in the future.

@sjcustomcreations

10 ай бұрын

Thank you for the suggestion. I'm addicted to Temu as well. I buy a lot of craft items, I have bought a couple of dresses and I did like them. They fit ok. I feel like their sizes are a bit different soni always size up one and that's been working just fine. Thank you for your comment and subscribing. I'm sure my videos will get better as I continue to make them.

New subbie. Thanks for sharing your great haul. I have a few dies that I ordered and so far so good. Look forward to seeing what you create. Happy Crafting.

@sjcustomcreations

10 ай бұрын

Thank you!

Wow that's a lovely card x

I totally agree with you about the magnetic sheets they are useless I bought about 4 packs of them thinking they would be cool I now have to replace them the plastic envelopes are good th

@kimmorin7847

2 ай бұрын

Try backing them with card board from cereal boxes or cracker boxes ...whatever you have . Just remember to keep shiny side up

Love your haul, thanks for sharing ❤

@sjcustomcreations

9 ай бұрын

You are so welcome

Thank you so much for posting the prices and links! Also it’s great that you showed us how they actually look when the dies are cut. Great job ❤I like how you took them out of the bag and laid on paper on the table to see it really good! 😊

@sjcustomcreations

10 ай бұрын

Thank you 😊

@rporter324

10 ай бұрын

Thank you so much for showing us what the guys actually look like! That is very helpful. I was looking forward to seeing the assembled products of the bags and the boxes I struggle with trying to put them together. If you have the links to those assemblies videos it would be very very helpful thank you in advance. It also might be helpful to have a ruler on the table so you can show the actual dimensions. Great job and thank you for taking the time to show these dies❤

I just found your channel... Love showings of the metal die cuts and that you took the time to cut some out to display. I have many some expensive and wanted to try some from Temu.

@sjcustomcreations

10 ай бұрын

Hi, Thank you for commenting. You should try their dies see how you like them. I have a lot of dies ranging from expensive to inexpensive. Thank you again for stopping by my channel.

@googlehater3079

10 ай бұрын

That she included links to every item is sensational. I find that videos that don't include them a waste of time because sellers often use irrelevant item names so you can't find anything by any logical search term.

New crafty friends here we just loved your haul and super makes . Have a lovely weekend and Happy Crafting from Scotland.x

@sjcustomcreations

10 ай бұрын

Thank you so much 😊.

I back my magnetic sheets with heavy card stock. It makes it so much sturdier.

@jinx5776

10 ай бұрын

Do you glue it?

@sjcustomcreations

10 ай бұрын

Thank you. I will do that soon. Great idea.

@debrareslauenwhite2130

10 ай бұрын

@@jinx5776 I use wide double-sided tape

Made it through lol i had to pause you alot and run over to Temu

I've ordered things from there love them and cheaper than UK prices

@dawneaschollmeyer9162

10 ай бұрын

To strengthen the magnetic backers use chipboard or cereal boxes. And did you know our designers do have china produce their products. They make extras and some of these are the rejects.

TYFS.

@sjcustomcreations

10 ай бұрын

Thank you 😊

I have bought several dies from Temu as well, but I can’t figure out how to separate the shadow dies from the words themselves. The connecting links are so small and I can’t get my wire snippets in between. How have you been able to separate them. I have had pretty good luck with my dies from Temu, and would really like to be able separate the saying dies. HELP if you have any thoughts or suggestions!

@sjcustomcreations

10 ай бұрын

Hi I also had that same issue with a couple of the dies. I have a pair of mini snippers that I had to use to get inbetween those tiny spaces I had to work the pieces separately moving the back and forth to get my tin snips in there to cut it. A mini pair of tin or wire snips that worked for me.. I bought them from Michael's. Good 🤞 luck.

@sandragoodall2429

9 ай бұрын

Usually if you twist the inside one they do come apart...good luck

the magnetic sheets come in 2 thicknesses.

@sjcustomcreations

10 ай бұрын

Thank you 😊

If you would lay the items on the table instead of holding them up to the camera they would be much easier to see. Your camera does not focus when you hold it up and move it around. If you watch other videos you will see that they leave the item on the table and zoom in with the camera if necessary.

@sjcustomcreations

10 ай бұрын

Thank you. Will try that 😊.

Hi new subby!! Awesome hual!!

@sjcustomcreations

11 ай бұрын

@laceandribbons3895 Welcome! Thank You!

@sjcustomcreations

10 ай бұрын

Hello laceandribbons3895 Thank you 😊.

Also, place the flat side of the die against the magnet, not the cutting side.

I would suggest you try laying your dies on the table as you are out of focus when you pick them up to the camer. I like your soft spoken manner and have subscribed and look forward to seeing your crafty/Temu videos in the future. Thank you

@sjcustomcreations

10 ай бұрын

Thank you for your suggestion. Will try doing that 😊

HI GIGI ❤

Your camera was flipped so we see everything upside down, so you might want to check that next time.

@sjcustomcreations

9 ай бұрын

Thank you.

I dont know why but these links dont take u to the product, just the temu site, so bit of a waste of your time with linking...may want to check that out for future videos..

flip your die over and it will hold better, i did the same thing and one side of magnet is the good side and the other side does not,

@sjcustomcreations

10 ай бұрын

Thank you.

I couldn’t find the name of the large multi flower die you show at the 14:45 minute spot…do you have the link for that one?

Hi I’m a new subbie

@sjcustomcreations

10 ай бұрын

Hello there. Thank you 😊

glue some cardboard on the back of the nagnetic sheets.

@sjcustomcreations

11 ай бұрын

That is a great idea. Thank you!

Where in Texas are you?

@sjcustomcreations

10 ай бұрын

Hi and welcome, I'm near Ft. Worth.

You do know they steal designs from American designers! I’m a card maker and several designers have been asked to design for Temu even though Temu has stolen their designs!

@sjcustomcreations

10 ай бұрын

Thank you for your comment ☺️

@jlhope1958

10 ай бұрын

Temu does not manufacture anything and therefore does not steal designs from anyone. They are a marketplace. They sell other manufacturers products.

@debramiller1150

10 ай бұрын

Please buy from the original artist. These are ripped off designs.

@sunnygirlonline

10 ай бұрын

All dies are made in China…they get them from there too and mark them up. 😮

@helengrim691

2 ай бұрын

Don't care if they steal designs, I CAN afford them from temu!!

where is the price

@sjcustomcreations

11 ай бұрын

Hi, to get prices are located under to he description (Title). The dies are listed there.,,.,.you may have to click on .....more to view the list.

I’m going to have to come back to this video when I have more patience!! You apparently don’t know where the lens is on your camera, and you move too fast for the camera to get a decent focus. Be well. I may be back after I take a chill pill.

@sjcustomcreations

10 ай бұрын

I'm sure my videos will get better as I continue to make them. Thanks for your comment,..any helpful suggestions are welcomed. 🤗. Hope you had a good weekend!

Omg u can talk and it makes watching very boring keep it simple and organized which this isn't sorry just being honest

@kimmorin7847

2 ай бұрын

Not very nice ! Move on if you don't like it!