Great Job friend! Wow, that big boring bar is a monster, and cuts a fine finish. You managed to get a very rigid set-up which really paid off. Great to see your shop and dig the way you do things. Good fortune for you!
@wendell4543 ай бұрын
Love your videos ive ran a lucus 5 for 30 yrs, i wish you would so more of the set ups, customers has no idea how long it takes to get something like that ready to start to machining.
@neffk7 ай бұрын
My understanding is that the majority of PTO accidents involve a bolt or something protruding from the shaft. Keeping everything low profile on rotating parts is a good idea.
@Rustinox7 ай бұрын
That's a good idea to make an XXL fly-cuter. It seems to work very well and leaves a very nice finish.
@hmw-ms3tx
7 ай бұрын
Hello Rusty. It turned out better than I had hoped it would, especially the surface finish. Ken
@outsidescrewball7 ай бұрын
Awesome work, thanks for sharing, funny I was thinking why didn’t he countersink and then you show it!!! HNY
@hmw-ms3tx
7 ай бұрын
Thanks.
@mftmachining7 ай бұрын
Excellent job, with some smart tooling. TOP.
@swanvalleymachineshop7 ай бұрын
Cracking job there Ken . You are getting a lot of use from the HBM . 👍👍👍
@hmw-ms3tx
7 ай бұрын
Thanks Max. In the last 3 months or so at least 90% of my time has been on this machine. They are awfully versatile and a pleasure to use. Ken
@MyLilMule7 ай бұрын
Quite the boring "bar." But when you think about it, you only need the t-slots on one half of the slide.
@hmw-ms3tx
7 ай бұрын
I had thought about whether the tee slots needed to go all the way or only half. In the end I decided to go all the way so I could bolt on a counterweight wherever I needed it if imbalance became a problem. Another reason was so I could alway add a back brace to a slender bar if it needed to be stiffened up. This is just a bar that goes from close to the end of the boring bar and then down to the boring slide at an angle, similar to a gusset. Ken
@edkeniston47867 ай бұрын
Nicely done!
@procyonia36547 ай бұрын
Now thats a proper boring slide, i have one similar to that i mount on my facing head for overturning pump flanges and press bearing journals. Not to be a pain in the arse, but you May want to add a counterweight, diametrically opposed to your tool though. Thats ALOT of load on your spindle bearings. Just bolt a 246 block or 2 on the other side. Fantastic work there brother, real good showcase of run what you brung.
@hmw-ms3tx
7 ай бұрын
Thanks. I have a second piece of plate that is the same as the boring bar holder plate (I got them cut at the same time). I got it so I could make another bar holder. I will probably drill holes in it and use it as a counterweight in the future. Even at 40 rpm the imbalance force did not cause any noticeably vibration so I was comfortable with it. However the force of the imbalance goes up to the square of the speed so I wouldn't be able to go much faster before it would be noticeable. Ken
@stevechambers91667 ай бұрын
Well done Ken that couldn’t of worked any better. Not much gonna stop you getting the job done
@hmw-ms3tx
7 ай бұрын
Thanks Steve. I agree, it turned out better than I had hoped for.
@jimsvideos72016 ай бұрын
Seems to work pretty ok.
@Armanufacturingskills7 ай бұрын
Amazing video
@hmw-ms3tx
7 ай бұрын
Thanks.
@Armanufacturingskills
7 ай бұрын
@@hmw-ms3tx welcome
@stovepipe6667 ай бұрын
Nice job on that
@hmw-ms3tx
7 ай бұрын
Thanks Stovepipe. Rebuilding this HBM took 2 years and was a lot of work. When I got discouraged I would watch some of your videos to remind myself what the prize was at the end of the rebuild. Ken
@kudosjeg7 ай бұрын
40 RPM with that mass, looked way faster and was a pleasure to watch!
@hmw-ms3tx
7 ай бұрын
It does look fast, especially when you are standing next to it. The finishing cut at 40 rpm gave a surface speed of 357 feet per minute.
@Armanufacturingskills7 ай бұрын
Nice work
@hmw-ms3tx
7 ай бұрын
Thanks.
@Armanufacturingskills
7 ай бұрын
@@hmw-ms3tx welcome
@hilltopmachineworks21317 ай бұрын
Pretty inventive. Nice job! 👍
@hmw-ms3tx
7 ай бұрын
Thanks Tom.
@stevewilliams24987 ай бұрын
When I first started working as an apprentice at GKN Sankey Wheels UK we ran 36" and bigger Webster and Bennett Boring Mills. Like a lathe but standing on its headstock and the slides vertical. Making wheels for earth movers and fighting vehicles. They would have eaten that job in 1/2 an hour. The company has closed down recently and I wouldn't mind betting they scrapped everything. The sight is about to start building houses. Pretty much the same story for all of British industry. 😢
@hmw-ms3tx
7 ай бұрын
About 12 years ago I was in a shop in Aberdeen that built tools for use in the oil industry. They had a Webster and Bennet vertical boring mill. They are hard to beat for this type of work. Ken
@stanwhyte70287 ай бұрын
Enjoyed! Sounds like someone is regrinding some decent sized drills at 18:30.
@hmw-ms3tx
7 ай бұрын
Thanks Stan. It was my father in law grinding some parts in the background.
@funone87167 ай бұрын
Is this a one man shop? The building does not look very old, nice concrete floor, etc. Have you done a shop tour video?
@hmw-ms3tx
7 ай бұрын
It's a 2 sometimes 2-1/2 man shop. I haven't done a shop tour video but I suppose I could some day. Ken
@BigBoss-rh7zq7 ай бұрын
You may add a counter weight next time.
@TangentJim7 ай бұрын
mw1972 - Excellent Video - nicely explained . --- Jim
@hmw-ms3tx
7 ай бұрын
Thanks Jim. I'm never really sure if I'm boring people with these videos. It's nice to know some people find them interesting. Ken
@TangentJim
7 ай бұрын
@@hmw-ms3tx - I often wonder the same thing myself . Allow me to elaborate about your Video. Their is a lot involved in making a Video. You connected all of them together in the proper sequence . Your Video is excellent - one of the best that I have seen . I'm in your corner . Keep up the great work , --- Jim
@paulmace79107 ай бұрын
Now that is one serious tool. Do they still make the automatic feed style for facing or is that too old school?
@hmw-ms3tx
7 ай бұрын
Thanks. I imagine they still make them but they are generally machine specific. Wotan built one for this HBM but unfortunately it didn't come with one. Ken
Пікірлер: 42
Great Job friend! Wow, that big boring bar is a monster, and cuts a fine finish. You managed to get a very rigid set-up which really paid off. Great to see your shop and dig the way you do things. Good fortune for you!
Love your videos ive ran a lucus 5 for 30 yrs, i wish you would so more of the set ups, customers has no idea how long it takes to get something like that ready to start to machining.
My understanding is that the majority of PTO accidents involve a bolt or something protruding from the shaft. Keeping everything low profile on rotating parts is a good idea.
That's a good idea to make an XXL fly-cuter. It seems to work very well and leaves a very nice finish.
@hmw-ms3tx
7 ай бұрын
Hello Rusty. It turned out better than I had hoped it would, especially the surface finish. Ken
Awesome work, thanks for sharing, funny I was thinking why didn’t he countersink and then you show it!!! HNY
@hmw-ms3tx
7 ай бұрын
Thanks.
Excellent job, with some smart tooling. TOP.
Cracking job there Ken . You are getting a lot of use from the HBM . 👍👍👍
@hmw-ms3tx
7 ай бұрын
Thanks Max. In the last 3 months or so at least 90% of my time has been on this machine. They are awfully versatile and a pleasure to use. Ken
Quite the boring "bar." But when you think about it, you only need the t-slots on one half of the slide.
@hmw-ms3tx
7 ай бұрын
I had thought about whether the tee slots needed to go all the way or only half. In the end I decided to go all the way so I could bolt on a counterweight wherever I needed it if imbalance became a problem. Another reason was so I could alway add a back brace to a slender bar if it needed to be stiffened up. This is just a bar that goes from close to the end of the boring bar and then down to the boring slide at an angle, similar to a gusset. Ken
Nicely done!
Now thats a proper boring slide, i have one similar to that i mount on my facing head for overturning pump flanges and press bearing journals. Not to be a pain in the arse, but you May want to add a counterweight, diametrically opposed to your tool though. Thats ALOT of load on your spindle bearings. Just bolt a 246 block or 2 on the other side. Fantastic work there brother, real good showcase of run what you brung.
@hmw-ms3tx
7 ай бұрын
Thanks. I have a second piece of plate that is the same as the boring bar holder plate (I got them cut at the same time). I got it so I could make another bar holder. I will probably drill holes in it and use it as a counterweight in the future. Even at 40 rpm the imbalance force did not cause any noticeably vibration so I was comfortable with it. However the force of the imbalance goes up to the square of the speed so I wouldn't be able to go much faster before it would be noticeable. Ken
Well done Ken that couldn’t of worked any better. Not much gonna stop you getting the job done
@hmw-ms3tx
7 ай бұрын
Thanks Steve. I agree, it turned out better than I had hoped for.
Seems to work pretty ok.
Amazing video
@hmw-ms3tx
7 ай бұрын
Thanks.
@Armanufacturingskills
7 ай бұрын
@@hmw-ms3tx welcome
Nice job on that
@hmw-ms3tx
7 ай бұрын
Thanks Stovepipe. Rebuilding this HBM took 2 years and was a lot of work. When I got discouraged I would watch some of your videos to remind myself what the prize was at the end of the rebuild. Ken
40 RPM with that mass, looked way faster and was a pleasure to watch!
@hmw-ms3tx
7 ай бұрын
It does look fast, especially when you are standing next to it. The finishing cut at 40 rpm gave a surface speed of 357 feet per minute.
Nice work
@hmw-ms3tx
7 ай бұрын
Thanks.
@Armanufacturingskills
7 ай бұрын
@@hmw-ms3tx welcome
Pretty inventive. Nice job! 👍
@hmw-ms3tx
7 ай бұрын
Thanks Tom.
When I first started working as an apprentice at GKN Sankey Wheels UK we ran 36" and bigger Webster and Bennett Boring Mills. Like a lathe but standing on its headstock and the slides vertical. Making wheels for earth movers and fighting vehicles. They would have eaten that job in 1/2 an hour. The company has closed down recently and I wouldn't mind betting they scrapped everything. The sight is about to start building houses. Pretty much the same story for all of British industry. 😢
@hmw-ms3tx
7 ай бұрын
About 12 years ago I was in a shop in Aberdeen that built tools for use in the oil industry. They had a Webster and Bennet vertical boring mill. They are hard to beat for this type of work. Ken
Enjoyed! Sounds like someone is regrinding some decent sized drills at 18:30.
@hmw-ms3tx
7 ай бұрын
Thanks Stan. It was my father in law grinding some parts in the background.
Is this a one man shop? The building does not look very old, nice concrete floor, etc. Have you done a shop tour video?
@hmw-ms3tx
7 ай бұрын
It's a 2 sometimes 2-1/2 man shop. I haven't done a shop tour video but I suppose I could some day. Ken
You may add a counter weight next time.
mw1972 - Excellent Video - nicely explained . --- Jim
@hmw-ms3tx
7 ай бұрын
Thanks Jim. I'm never really sure if I'm boring people with these videos. It's nice to know some people find them interesting. Ken
@TangentJim
7 ай бұрын
@@hmw-ms3tx - I often wonder the same thing myself . Allow me to elaborate about your Video. Their is a lot involved in making a Video. You connected all of them together in the proper sequence . Your Video is excellent - one of the best that I have seen . I'm in your corner . Keep up the great work , --- Jim
Now that is one serious tool. Do they still make the automatic feed style for facing or is that too old school?
@hmw-ms3tx
7 ай бұрын
Thanks. I imagine they still make them but they are generally machine specific. Wotan built one for this HBM but unfortunately it didn't come with one. Ken