Lambretta Electronic loom Pt2 and switches

Switches and connections to lamp holder

Пікірлер: 14

  • @user-qz7kd9qs2t
    @user-qz7kd9qs2t Жыл бұрын

    Hi Your explanation is mint for wiring gp switches can you help me pls My ignition loom seems to have more wires than enough all my lights work except headlight any thoughts thanks 6:34

  • @m1scooterlife259

    @m1scooterlife259

    Жыл бұрын

    You need to know if your ignition switch is ac/dc or just ac, if its the first you have to join two together so the ac goes to both sides of the switch

  • @20redroyals
    @20redroyals2 жыл бұрын

    Hi, I am trying to wire my Lambretta LI s3 and I would be eternally grateful if you can show a more detailed wiring at the ignition switch end please. The ignition switch I have has 4 positions and 7 wires (yellow green brown pink black blue & orange) and looks totally different to your one. Thank you for posting a very helpful video.

  • @m1scooterlife259

    @m1scooterlife259

    2 жыл бұрын

    Hi Joe, if your not I'm a rush , I will help, I've just got in from work

  • @20redroyals

    @20redroyals

    2 жыл бұрын

    @@m1scooterlife259 Hi, Sorry, I didn't expect such a rapid reply. When your are good and ready. Regards, Joe.

  • @20redroyals

    @20redroyals

    2 жыл бұрын

    Hi Again, Any chance of any info regarding the above question of the ignition switch modification. Regards, Joe.

  • @m1scooterlife259

    @m1scooterlife259

    2 жыл бұрын

    Email me at helpinghandscooterman@gmail.com and I can forward where what cable goes

  • @ademckinlay4946
    @ademckinlay49467 ай бұрын

    Hi mate, can you please confirm the wire colour and function on the handlebar switch please? I have an S3 LI 150 to replace Thankyou!

  • @ademckinlay4946

    @ademckinlay4946

    7 ай бұрын

    I have red, blue, yellow, white, black, grey and brown at the handlebars, scooter is battery model

  • @m1scooterlife259

    @m1scooterlife259

    7 ай бұрын

    Proper colours should be red and blue are high and low beam white for horn, should be a long cable to horn, you should then have ac for high and low beam only this is usually brown and only feeds lights when engine running, purple feeds the pilot light power from the battery and this is switched via yellow cable, black cable feeds power to pilot bulb and rear lamp, dc is fed to the horn direct and the grey/ white then earths it out when you press the horn button. I hope this helps, good luck

  • @ademckinlay4946

    @ademckinlay4946

    7 ай бұрын

    @@m1scooterlife259 thanks very much, will have a craic! 🇦🇺

  • @m1scooterlife259

    @m1scooterlife259

    7 ай бұрын

    Good luck take your time

  • @ademckinlay4946

    @ademckinlay4946

    7 ай бұрын

    @@m1scooterlife259 thanks very much, well done with channel and best of luck in '24 🇦🇺