Great run!!! 46mph is good in my book!!! Car looking and sounding great to!!!🫡
@RuggedRc
2 күн бұрын
Yes for the stock gears I believe it has 15t 19 clutch bell , low gear ,I'm going to put Gimar .28 in with bigger gears then it will get it, thanks for watching!!! 😀
@Nitro_rc_life9 күн бұрын
Ripping!!!!
@tonysands28379 күн бұрын
Running really nice bro 🤜🔥💯🇦🇺👍
@RuggedRc
9 күн бұрын
Thanks 👍
@alexgarrod90935 күн бұрын
Nice 👍
@RuggedRc
5 күн бұрын
Thanks ✌
@Nitro_rc_life9 күн бұрын
46mph
@blameusa708210 сағат бұрын
hello boss, i just got a GT2... im wondering what engine to get.. a .21 or a LRP .28 it has 43t/47t center gears. I just watched a guy get his going 81mph
@RuggedRc
5 сағат бұрын
Lrp screams that would be a good choice if you get a 21 I would get an os or Reds
@Nitro_rc_life9 күн бұрын
Your low is pretty rich you can hear it. I know what your gunna say "it going to hit 300*" and I would say yup perfectly normal. Be aggressive on the low and conservative on the high at low rpm it doesn't need the lube like it does at 30k + I keep trying to spread the word. And think of it this way plastic don't melt til 400*+ so I metal/aluminum engine running at 300* is perfectly fine. Better engines and better carbs do run cooler but these engines run best around 300. And I do mean 300 at the end of tank obviously not the beginning that's too lean
@Nitro_rc_life
9 күн бұрын
It's a balance. I'm just trying to help not hurt you or your cars!
@RuggedRc
9 күн бұрын
Ok thanks, that's pretty good 46 for stock gears
@TexasHill8 күн бұрын
Im estimating about 50 mph❤ ,
@RuggedRc
8 күн бұрын
It will hit 50 when I change header and do some port matching and few other mods
@RCNstuff-nt4fo2 күн бұрын
Very short!
@RuggedRc
Күн бұрын
Sorry, but I was only testing and learning The performance analysis device and sharing it with you, so it didn't take long
Пікірлер: 18
Great run!!! 46mph is good in my book!!! Car looking and sounding great to!!!🫡
@RuggedRc
2 күн бұрын
Yes for the stock gears I believe it has 15t 19 clutch bell , low gear ,I'm going to put Gimar .28 in with bigger gears then it will get it, thanks for watching!!! 😀
Ripping!!!!
Running really nice bro 🤜🔥💯🇦🇺👍
@RuggedRc
9 күн бұрын
Thanks 👍
Nice 👍
@RuggedRc
5 күн бұрын
Thanks ✌
46mph
hello boss, i just got a GT2... im wondering what engine to get.. a .21 or a LRP .28 it has 43t/47t center gears. I just watched a guy get his going 81mph
@RuggedRc
5 сағат бұрын
Lrp screams that would be a good choice if you get a 21 I would get an os or Reds
Your low is pretty rich you can hear it. I know what your gunna say "it going to hit 300*" and I would say yup perfectly normal. Be aggressive on the low and conservative on the high at low rpm it doesn't need the lube like it does at 30k + I keep trying to spread the word. And think of it this way plastic don't melt til 400*+ so I metal/aluminum engine running at 300* is perfectly fine. Better engines and better carbs do run cooler but these engines run best around 300. And I do mean 300 at the end of tank obviously not the beginning that's too lean
@Nitro_rc_life
9 күн бұрын
It's a balance. I'm just trying to help not hurt you or your cars!
@RuggedRc
9 күн бұрын
Ok thanks, that's pretty good 46 for stock gears
Im estimating about 50 mph❤ ,
@RuggedRc
8 күн бұрын
It will hit 50 when I change header and do some port matching and few other mods
Very short!
@RuggedRc
Күн бұрын
Sorry, but I was only testing and learning The performance analysis device and sharing it with you, so it didn't take long
@RCNstuff-nt4fo
Күн бұрын
@@RuggedRc oh haha, not the video, the car!