If you're digging *hard ground* where *down force* is required and you *don't need a lot of lifting* power, the *blade in the rear position* makes it more efficient.

@jameshurley7297

8 ай бұрын

Also - never climb with the blade in front. The handbook will say to keep the weight forward and blade in front but I’ve lost count of the times I’ve the blade behind me - lost grip and slid backwards - but dropped the blade to stop the machine sliding.

Kubota swing pump is 2500 to 5000 depending on what all parts you need to replace. 3 parts on this machine His replacement swing pump is around 500.00

I have the kubota k008. Very nice machine for tight access jobs. Kubota is always worth lots for resale. Not a comfortable machine, but it will beat a bx25.

I have a k008 and I installed a thumb, the first thing you must do is have a two way hydraulic valve installed. Kubota only provides a one way to operate a auger or hydrahammer.

Rhinoceros is a decent brand of Chinese digger to. But I agree, stay away from a auction and go through a dealership, at least you have a warranty that way

I owned k008 I loved it but too small and too light! Now i would buy Kymron over Kubota! 10K vs 30k ! 20 k deferens!

@richeagleton5285

5 ай бұрын

Where can I find one

Do ya'll include a service manual with your machines?

I’m looking to buy one from you ! Nice machines for the money!

@krequipment

Жыл бұрын

Check out the full selection at www.microtrackhoe.com

You should compare it with the U10-3

I don’t doubt the kubota may be a better built machine and may last longer. But these Chinese machine are not built for an excavating company. These are home owner machines . I don’t care what you say, it will dig better and faster than a hand shovel.

The Kabota is definitely worth the extra money.

What is the smallest machine available? I'm a plumber, I dig mostly water lines, gas line, irrigation lines. I need to be able to get through standard fences if possible.

@krequipment

Жыл бұрын

You can view all of our machines at the link below. www.microtrackhoe.com/machine-inventory

@vinnygoombatts1458

Жыл бұрын

@@krequipment Thanks, also is there a wait time or are the machines in stock?

@peterberkhout4673

6 ай бұрын

Kobelco ss1

I was kind of interested till i seen china

Comparing Oranges and Lemons. With China in meltdown, I wonder where the parts will come from?

@chiefkyle1098

5 ай бұрын

@GriseldaBlanco-kt2to You can save 50% more if you buy directly from the manufacturer. KYRON simply tosses a $200 cylinder on the thumb, rebadges it, then doubles the price. Every part in every mini excavator comes from China. Made in China, assembled in the USA.

@bhhvvbvgyvbuvv

27 күн бұрын

Everything we buy is made in China.

Who carries parts for these? When it breaks down do you offer a loaner machine while the other gets fixed?

@rockingtranch543

Жыл бұрын

If you listen in the video...He said all parts are available and on their models parker pumps and Eaton drives fit I own the KYMRON and checked myself. Loaner?? No one gives you a loaner except maybe Mercedes-Benz dealers SMH entitled a bit are we??? You probably better stick with buying the Kubota for 30 grand so they can lol at you too when you ask for a loaner.

@lte008

Жыл бұрын

@@rockingtranch543 you do realize that a bunch of dealers will give a loaner if your new piece of equipment goes down under warranty.......sounds like you speak of things you don't know much about.

@rockingtranch543

Жыл бұрын

@@lte008 Ya if you buy a Cat or John Deere that's over a 100 grand I'm sure they will. Your still an entitled DB...

@BTGCTechSupport

Жыл бұрын

Kubota don't give out loaners can tell ya that right now.

@lte008

Жыл бұрын

@@BTGCTechSupport must be up to the store. Because our local Kubota does.

Everyone is biased - one way or another. Sure, he is biased. He would be a failure in business if he did not believe in his product. The key is this: is he giving truthful information? I'm keeping an open mind AND doing my own research! 😊

@athabascastonetile195

5 ай бұрын

Kymron or. Groundhog. Any day. Also comes with Kubota yanmar or gas engines ......thumb. Way better than Kubota oo8 or even the. U-10. I have the. Kh14 pro. Love it

@athabascastonetile195

5 ай бұрын

Kymron or. Groundhog. Any day. Also comes with Kubota yanmar or gas engines ......thumb. Way better than Kubota oo8 or even the. U-10. I have the. Kh14 pro. Love it

@athabascastonetile195

5 ай бұрын

Kymron or. Groundhog. Any day. Also comes with Kubota yanmar or gas engines ......thumb. Way better than Kubota oo8 or even the. U-10. I have the. Kh14 pro. Love it

@athabascastonetile195

5 ай бұрын

Kymron or. Groundhog. Any day. Also comes with Kubota yanmar or gas engines ......thumb. Way better than Kubota oo8 or even the. U-10. I have the. Kh14 pro. Love it

@athabascastonetile195

5 ай бұрын

Kymron or. Groundhog. Any day. Also comes with Kubota yanmar or gas engines ......thumb. Way better than Kubota oo8 or even the. U-10. I have the. Kh14 pro. Love it

yes sir i sell in canada

Ok so one is made in China and the other is made in Japan they are both foreign made

I have a K008-3, if I were to do it all over agian, Id stick to Kubota, tried and true.

@551moley

5 ай бұрын

A dash 3 Kubota is quite a few years old now 2003 ish? My 121-2 from 1997 with 5000+ hours is still going strong it's worth virtually the same if not more than I paid for it 5 years ago, original engine, pumps and track motors. The Chinese stuff just won't hold any value at 5,10 years down the road.

@tacomafan7488

5 ай бұрын

I sold k008 mini and bought kymron h20 1.8 tons just like Kubota u17 size! Operates just like Kubota!

excavator ❤❤

Can you get diesel motor in the little guy?

@krequipment

Жыл бұрын

We have a size up with Diesel called the KYMRON YH20D go to the website for the full line up www.microtrackhoe.com

Kubota wants around 30k for that pos?

How is this a fair test? The Chinese excavator is a heavier machine then the Kubota?

@life_of_riley88

7 ай бұрын

These little china machines are less than $10,000, the kubota is $30,000. . .

@thewanderer5637

5 ай бұрын

I have both brands of machines... The Kubota will win everyday of the week. Different models but the chinese one I have develops problems after 4-5 hours of continuous running as there is no radiator to cool the hydraulics. Changed so many hydraulic seals on it. The seat doesn't hold up well.. the bolts rattle themselves out for the cab. The hydraulic joysticks will become loose. The Kubota can run all day no worries.

@shadycraft6594

5 ай бұрын

@@thewanderer5637 What kymron model do you own?

@tacomafan7488

5 ай бұрын

@@thewanderer5637 depends where you buying and who you buying from! I had k008 I loved it but too small and too light! Now i would buy Kymron over Kubota! 10K vs 30k ! 20 k deferens!

So these are Chinese made

@chiefkyle1098

5 ай бұрын

Yes. All of them are.