So many useless information everywhere but this was bulls eye. Tks! Everyone watch this for anything.

@TheSmartHomeHelper

11 ай бұрын

Thanks for the comment and I try to make it short to the point no fluff. No one needs all the extra info!

So concise and helpful! The fat-fingering example was helpful bc it made me realize I was doing the same thing - thanks!

@TheSmartHomeHelper

3 ай бұрын

Glad it was helpful! Thank you for the comment! Yes, I always fat finger lol

You are a genius! Thank you so much! You made it so easy I can't tell you how much I appreciate!

@TheSmartHomeHelper

3 ай бұрын

You are so welcome! Thank you for the kind comment!

Thank you very much for a no frills, easy to watch video!

@TheSmartHomeHelper

2 жыл бұрын

Glad it was helpful! Thanks man! Don't forget to Subscribe!

Thanks so much! I struggled for the longest.

@TheSmartHomeHelper

3 жыл бұрын

Glad I could help!!

@MJ20402

5 ай бұрын

I was about to throw the whole lock at the fence but this video 100% saved the day

Thank you! Straight to the point and explained well

@TheSmartHomeHelper

3 жыл бұрын

Thanks for the comment Milli T!

You ROCK! THANK YOU! And, I was barking up the wrong tree with instructions that told me to press 9 six times, among a long list of other actions, and all that mumbo jumbo from another website!

@TheSmartHomeHelper

3 жыл бұрын

Glad I could help Harry!

Fantastic! Clear and understandable. Thank you.

@TheSmartHomeHelper

8 ай бұрын

You're very welcome! Thank you for the kind comments!

Perfect explanation! Thank you I look like a hero to my girlfriend because of you.

@TheSmartHomeHelper

2 жыл бұрын

Awesome to hear!

Your a life saver. Thanks so much

@TheSmartHomeHelper

Жыл бұрын

Happy to help!! Thanks for the comment

Best video! You made it easy! Thank you! All other videos were so complicated

@TheSmartHomeHelper

2 жыл бұрын

Glad it helped! Thank you KI L!

Thank you sooooo much !! So helpful !! :)

@TheSmartHomeHelper

3 жыл бұрын

You're welcome!

Thank you this worked wonderfully

@TheSmartHomeHelper

2 жыл бұрын

Glad it helped

Thanks, helped a lot!

@TheSmartHomeHelper

2 жыл бұрын

Glad to help!

Thank you!!!! This helped!!!

@TheSmartHomeHelper

2 ай бұрын

Glad it helped! Thanks for comment

Thanks so much!

@TheSmartHomeHelper

3 жыл бұрын

You're welcome! Glad I could help!

Life saver thank you

@TheSmartHomeHelper

2 жыл бұрын

Glad I could help!

Easy! Thank you!!

@TheSmartHomeHelper

2 жыл бұрын

Glad I could help

very helpful. Thank you

@TheSmartHomeHelper

Жыл бұрын

Glad it was helpful!

Thank you!

@TheSmartHomeHelper

9 ай бұрын

You're welcome! Thanks for the comment!

Very helpful!

@TheSmartHomeHelper

Жыл бұрын

Glad it was helpful!

Thanks!

@TheSmartHomeHelper

3 жыл бұрын

Welcome!

Great video

@TheSmartHomeHelper

Жыл бұрын

Thank you for the comment!!

Thank you

@TheSmartHomeHelper

3 жыл бұрын

You're welcome

Quick and easy! Have a like and subscribe👏🏼

@TheSmartHomeHelper

2 жыл бұрын

Thank you so much Joey!!!

Very helpful. We took the house over and the old owner didn't leave as with the mastercode. Any suggestions?

@TheSmartHomeHelper

4 жыл бұрын

Yes go ahead and factory reset: kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html This will delete all the codes and allow you to create a new one.

Does this model sync with the app? If so, do you have a video for it?

@TheSmartHomeHelper

3 жыл бұрын

It does not, this Lock will require a hub because it is on Z-Wave.

@mjlafalaise

3 жыл бұрын

@@TheSmartHomeHelper thank you so much! New subbie-- really helpful video!

@TheSmartHomeHelper

3 жыл бұрын

Thank you Mynoucka! That means a lot!!!

If I don’t have the existing code what to do to change it?

@TheSmartHomeHelper

4 жыл бұрын

I would try resting the lock kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html first then adding in your code. This way you erase all the old codes and can put new ones in.

Any videos on the mechanism? Was struggling to open and lock now it won’t do either. Fresh batteries lights up but no movement ☹️😞😭

@TheSmartHomeHelper

3 жыл бұрын

This is for the Aura which is pretty similar to the 914 kzread.info/dash/bejne/a4ydsMiPmtzVnNI.html.

I put new batteries in my lock n you can unlock from outside with key pad but can't lock it by keypad

@TheSmartHomeHelper

3 жыл бұрын

Try unlocking with the door open. If works then there might be something jamming it to close. If that does not work I might try resetting the lock then trying the lock button.

Is this model a smart lock / works with smart phones phones

@TheSmartHomeHelper

Жыл бұрын

So the 914 will need a hub because it is either Zigbee or Z-wave

How can I remove the cover please advise tks

@TheSmartHomeHelper

3 жыл бұрын

So with the 914 I believe you have to squeeze the cover plate to remove. It can be a little difficult so I typically will just take off the backplate completely with the two screws on the side.

Can you use more than 4 numbers as a code?

@TheSmartHomeHelper

2 жыл бұрын

Yes, I think it is 4-8 digits

How does one delete ALL codes while not remembering what those codes are?

@TheSmartHomeHelper

2 жыл бұрын

Here you go: kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html

I tried this multiple times, then i factory reset it and tried again. Nothing worked. Are there any ither suggestions before i return this lock and switch to a different one?

@TheSmartHomeHelper

8 ай бұрын

kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html

My buzzes 3 times whenever I hit the program code

@christopherrosa1362

2 жыл бұрын

Me too

@TheSmartHomeHelper

2 жыл бұрын

I might try a factory reset on the lock or rehanding

But wait, how do we do it with a phone?

@TheSmartHomeHelper

3 жыл бұрын

Do you have a smart hub? The 914 is Z-wave so you'll need a smart hub and should be able to do it on there. If not, this is the way you'll have to do it.

What do you do when you forget the pass

@TheSmartHomeHelper

Жыл бұрын

Factory reseting is always an option if that what you are referring too

I tried re-key and then reset code and it only flashes red! What do I do:/

@lyzandralebron2531

2 жыл бұрын

It’s also not locking when I press the lock icon after I re-keyed it

@TheSmartHomeHelper

2 жыл бұрын

Hey go ahead and try rehanding the lock this should get the lock button to work kzread.info/dash/bejne/nYd1mKSnXcm0c9I.html

Doesn’t work for me. Is there a master code and that’s what it’s not allowing me to delete?

@TheSmartHomeHelper

Жыл бұрын

I don't have a video on Master code but you do this kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html then add code.

@BigSh00ts

Жыл бұрын

@@TheSmartHomeHelperthanks!!! I’ll try when I get home

My program button doesn't beep.

@TheSmartHomeHelper

2 жыл бұрын

Hey Brian, I might try doing a Factory Reset to see if that helps or check the batteries. Here is video on how to reset kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html

@paulopilot76

2 жыл бұрын

I had the same issue , so I cant create a code. what u did?

Still can't delete a code Tried multiple times

@TheSmartHomeHelper

5 күн бұрын

I would try this kzread.info/dash/bejne/rIt7pqWvl7TbfKw.html

How to change master code?

@TheSmartHomeHelper

3 жыл бұрын

So I don't believe the Kwikset has a master code like the Yale lock does.

@TheSmartHomeHelper

3 жыл бұрын

Actually, I was able to find this video for the 916 I'd give this a try not sure if it will work but worth a try. kzread.info/dash/bejne/oaxmlLWshLfMl8Y.html

@fencerd02

3 жыл бұрын

@@TheSmartHomeHelper the 916 process seems to work

@TheSmartHomeHelper

3 жыл бұрын

Awesome 👍 Sorry for late reply on this!

@fencerd02

3 жыл бұрын

@@TheSmartHomeHelper thanks for the great content!

It didn't work on my end

@TheSmartHomeHelper

Жыл бұрын

I might try a reset to see if that helps

Thanks, this helps a lot

@TheSmartHomeHelper

10 ай бұрын

Glad it helped! Thanks for the comment!