If you shut off the tractor then move the control lever before you plug in the hoses it removes any hydraulic pressure.

I think the dealership can be the biggest problem of any piece of equipment. Regardless of the brand.

When I bought my new 3902 I had the dealer swap a few things over from my 2501 trade in! I wanted my 3 point pin style sway bars that I had purchased after I bought the 2501 ….Dealer said not a problem. Plus they filled my rear tires and a few other minor things. About a week after I got the 3902 I was adjusting the top 3 point link and noticed the sway bar nuts that tighten to the lower link were just about ready to fall off ! I was pissed at first cause that could have been bad if they fell off while I was backing up! Nothing bad happened and I was thankful I caught it when I did ! Just went and grabbed a wrench and tightened them myself! The kubota dealership has been nothing but nice to me over the years and people make mistakes! Your situation was much more serious but like you said it could have been worse! Glad you got it working fairly easliy

Glad you got it fixed. I purchased a b2650 September 2019. When I checked the torque on the wheels and loader frame 3 lock washers failed and a nut that was tacked to the frame broke off.

@SunnySlopeHomestead

4 жыл бұрын

Good lord really ! I do need to do a once over before this spring to see what came loose I’ve the winter for sure 👍👍

Glad you got your tractor fixed. Good thing it happened when it did💕

@SunnySlopeHomestead

4 жыл бұрын

You’re telling me lol I have to see it that way or I’ll start crying again 😂

Crazy, glad he was able to fix it!

@SunnySlopeHomestead

4 жыл бұрын

I felt bad cause I could have done the work. I’m the guy who doesn’t like seeing old timers exert them selves but this guy wasn’t having it. He messed up and he’s was gonna fix it no if ands or but about it . He did let me help a little lol

Man I feel your pain! When I got my L2501 last year I had it delivered with a rb3772 rear blade. When I went to use it I couldn't pivot the blade. I'm 6' 4", 300lbs and couldn't budge it! Turns out it was assembled improperly, and no grease on the pivot zerks. A 650lb blade needs a little grease and proper installation. I then went over the entire tractor and found what I'd call "dealer setup flaws". And much like your experience, when I went to buy the tractor and up to delivery the salesman always picked up the phone, after delivery, ha. Took a month to get my owner's manual and my smv triangle from them. Love my tractor, not the dealer.

@SunnySlopeHomestead

4 жыл бұрын

Love the tractor but the dealer was nothing but issues which I think it a time I make a video explaining what all really happen when I bought this tractor

@kennkid9912

Жыл бұрын

Grease zerks on a scraper blade? Why? I have used a 7 foot woods for years. I do use wd40 . We dont turn it much. We keep the bolt tight. That is a design flaw and if it gets loose it breaks. They are just HDWE store hard bolts ! inch,. Easy to fix.

yea most tractor dealers are your friend when you are buying the tractor, after that they treat you like you have the plague

@SunnySlopeHomestead

4 жыл бұрын

Yeah we’ll see but I hate taking anything back to the dealer and they came out so not bad so far

@wildbill23c

4 жыл бұрын

Car dealerships are the same way LOL.

Glad you got it fixed. At least they fixed it quickly for you. I hate phone tag. Merry Christmas to you and your family bud. Hope y'all have a good one and a safe one.

@SunnySlopeHomestead

4 жыл бұрын

It’s been a mild winter so far so I dodge a bullet by it breaking now and not later for sure

nice touch sending the salesman out, good to see it all worked out

@SunnySlopeHomestead

4 жыл бұрын

There call or mine lol but it got down , shoot I’d fixed my self if they gave me the parts

I just happened across your channel. Of course, it has to be a video where your tractor breaks down! LOL. I was wondering why Big E would call you a sack... until I saw who Zack was. Ohh, and I subscribed. I don't want to be watching over my shoulder for you!

@SunnySlopeHomestead

3 жыл бұрын

Twin Brook Acres hahahaha its been good so far and has few flaws but what doesn’t. My take was to show everyone god and bad no matter what they this tractor and not talk it up just because I own it lol thanks for watch and subscribing. We do have to great comments like Big E time to time 👍

Put mine together and the instructions were specific on which way that cylinder goes on and what way the connections go. Super easy to install and use. I will say the dealer I bought from was terrible after, my new dealer has been fantastic.

@SunnySlopeHomestead

4 жыл бұрын

It’s looked simple but guess not lol

Man you had me nervous and scared. Here I am itching to get a kubota bx2380. Perfect video to reiterate just how important the dealer you buy your tractor from regardless of the color is. Always been said the dealer is more important than the make often times. Glad I have a excellent dealer!!!

@SunnySlopeHomestead

4 жыл бұрын

Sorry lol but yes you can buy the best machine but if the dealer suck it may as well be crap 💩👍

@SunnySlopeHomestead

4 жыл бұрын

You’re safe though I love this tractor

@jew0182

4 жыл бұрын

Sunnyslope Homestead that’s awesome man. Makes a mans life easy for sure

A good dealer gets it done even in the busy season. I took our little Deere in for a warranty repair on the mowing deck, a spindle froze and stretched the belt. I took it to a closer dealer, not where it was purchased, and their shop was so full they had machines lined up outside to fix. 24 hours later it was fixed and waiting on me to pickup. They were doing 20-30 repairs a day.

@SunnySlopeHomestead

4 жыл бұрын

Good lord that some good service! Yeah I’m not as lucky and they’re more of the when we get to it kind of shop 🤦‍♂️

We own several brands/models. In addition to our bigger tractors we own a BX2200, BX2660 and John Deere 1025 and you are right, this happens and as long as they make good, I'm OK with it. Our dealers recently doubled the size of one of his dealerships to try to keep up and usually the least experienced guy often does setups. Glad everything worked out.

@SunnySlopeHomestead

3 жыл бұрын

Our dealer is so over whelm you think that they made a bad product lol

@tripler3724

3 жыл бұрын

@@SunnySlopeHomestead Our dealer is a third generation, family owned business that started out as solely a Ford tractor dealership. They have two locations selling New Holland and Kubota. They also have farming operations and even took my son out to one of their farms to compare products. They sell a lot of tractors and will gladly give good prices on trade ins. A dealer that is closer to me sells very few Kubotas because of poor customer service.

Grrrr There’s nothing worse than service rep that refuses to speak to you when you call 😡 It’s good that they fixed it, but it shouldn’t have happened in the first place 🙄

@SunnySlopeHomestead

4 жыл бұрын

Yeah they are jacked up there and the service rep is only there cause he’s the last man standing lol he young and I’m over his head

Just found your channel and subscribed. Glad it all worked out for you. I am new to you tube. Just started my channel after Thanksgiving. I will be doing an interview with the local Mahindra dealer in a couple,e weeks. I am intakes with my Sub ota dealer dealer and my local still dealer about doing interviews with them. Should be pretty informative.

@SunnySlopeHomestead

4 жыл бұрын

That sounds great look forward to watching it

@tractortalkwithgary1271

4 жыл бұрын

@@SunnySlopeHomestead I really have to start proof reading my replies closer. I am in talks with my Kubota dealer and my Stihl dealer about doing interviews also. My computer has a mind of it's own. It may be smart but it sure can't spell.

@SunnySlopeHomestead

4 жыл бұрын

Tractor Talk with Gary I do it all the time lol

Hey as long as your tractor's happy!

@SunnySlopeHomestead

2 жыл бұрын

Hahaha , its very happy

Glad it got fixed!

@SunnySlopeHomestead

4 жыл бұрын

Joyce Britt thank you , I’m just waiting for a big snow now ❄️

Glad to see it worked out!

@SunnySlopeHomestead

4 жыл бұрын

Broke at the best time lol

@TheMindfulHomestead

4 жыл бұрын

SunnySlope Homestead They always do!

Glad I saw this as we are prepping/researching for our tractor purchase early spring. Thanks and Merry CHRISTMAS

@SunnySlopeHomestead

4 жыл бұрын

Any questions I’ll be happy to answer them

@bigtime37ja

4 жыл бұрын

Thanks, I will be in touch soon with some questions. Thanks for the mentorship.

@michaelmactavish1728

4 жыл бұрын

kubota has good reputation to help customers get back up and going again wich my kubota dealer is great that way too plus had to get the kubota dealer come and fix the 2 john deeres and newholland tractors because newholland and deere didnt want to fix it for us and the tractors been breaking down in middle of the bridge in the town in winter wich disapointed with deere and newholland and the kubota dealer came to the rescue wich thank goodness at -20 windchill and the deere and newholland wouldnt come help us but kubota did wich why were glad going all kubota tractors in the feature :)

Love my JD dealer and service parts guy!

Ya done good not cussin any more than ya did. I know that kinda crap can REALLY piss ya off. Customer service is the number 1 thing I consider nowadays when making any kind of significant purchase. Good luck! Oh, and I’m glad I ain’t the only one who talks to his machinery! LOL!

@SunnySlopeHomestead

4 жыл бұрын

Yeah the guy running the shop has no business in the position. I love Kabota but that shop is ruining their name

Do the hoses go around the front? Kubota has a lot of residual pressure, typ shut down the engine, cycle the valves for a couple seconds, then disconnect. Before connecting do the same but push the check balls in to bleed pressure off the line. yep, backwards it seems.

That was an unfortunate mistake. At least you could have plowed snow with your loader if you had too. Look at the bright side- I bought a brand new Case IH tractor this year, and it had tons of issues. Long story short, they picked up my tractor in August and I still dont have a tractor back!!!!

@SunnySlopeHomestead

4 жыл бұрын

DeHaven Family Farm oh man that is horrible , I wouldn’t be able to handle that easily. I’ve heard of horror story’s of the Cabela brand tractors being so bad the discontinued the line. They had one in the shop were it was on its 3 wiring harness 😳 dang

put the FEL back on?

You are a patient man, Mike. All that phone tag would have made me want to drop kick that service rep into the next county. On other channels I have seen new tractor failures of other brands. Must go with the territory of tractor ownership. Thank goodness you are blessed with a mechanical mind because you knew what the problem was immediately.

@SunnySlopeHomestead

4 жыл бұрын

Let’s just say I edited a lot of cursing 🤬 out and if it was for Jason at Cog Hill talking me down I would posted it lol

I understand your frustration on a brand new piece of equipment failing. I guess shipping these implements already assembled exposes hydraulic lines and possibly the cylinders as well. I think this falls squarely on your dealer and not Kubota, but I understand again your frustration, I purchased a L4701 and the guy delivered my box blade and unloaded it with a chain and hoist scratching it up pretty bad in a lot of places, when I complained the guy asked how else was he gonna unload it and I asked if he ever heard of straps?, yes a box blade contacts the ground, but I don’t want it to start rusting where it contacts nothing right, this stuff is expensive, good luck amigo

@SunnySlopeHomestead

4 жыл бұрын

I’m happy with the tractor but the deal is something else to deal with . Still happy with my choice so far and this will be my first year really using it hard

At one point of the video you were considering not contacting Kubota. Always give people the chance to take responsibility, take blame out of the story. People make mistakes, if it is not brought to their attention the next customer could have the same issue. I will bet a bunch he will know how the cylinder is positioned on the next unit. Thank you for doing it right.

@SunnySlopeHomestead

3 жыл бұрын

Yeah you’re correct , they made it up to me buy fixing a few things I didn’t notice when I took it to the shop under warranty work

Wow. Glad they finally took care of the dealer assembly mistake. You can't really fault Kubota tractor mfg for this issue. That is dealer all the way. My dealer here in central PA is AWESOME! I bought a B2920 about 10 years ago. I have never had a single problem with it. When I purchased mine, the dealer gave me his personal cell number and said if there was any issues with the tractor that he would have a loaner delivered to my house right away and take mine in for any necessary repairs.

@SunnySlopeHomestead

4 жыл бұрын

Mike Tucker nope can’t blame the maker just the deal which is to say the least a bunch of clowns lol

@andyscorner101

Жыл бұрын

I believe you can blame Kubota for not awarding the dealership to a competent entity. Too often manufacturers simply desire to sell a dealership to anyone that has a customer market preset that will allow them to generate immediate sales rather than actually qualify those to whom they sell their licenses to.

Way to go Kubota 🤣😂🤣. Funny, but not funny, lol. Glad it worked out and the tractor is happy! 😜

@SunnySlopeHomestead

4 жыл бұрын

Tractor is very happy 😊 hahahahaha

My Kubota problems were with the dealerships installation and service and not the design.

Looks to be a fairly easy fix, it will just take a little time and an even easier solution. While you have it apart to replace that broken fitting, reinstall the hydraulic cylinder the right way around. The piston needs to attach in the implement frame, not on the pin for the blade.

@SunnySlopeHomestead

4 жыл бұрын

It was an easy fix for sure

Alcoholic shakes got that adjustable wrench working good.

@SunnySlopeHomestead

4 жыл бұрын

Not sure what he shakes are from but I had to give him a hand installing the cylinder. I insisted on doing it myself but he refused to let me fix their mistake. It also was 35deg out and he was sweating like hell so I’m guessing his health h wasn’t all that great

@robworsnop7282

3 жыл бұрын

Some folks suffer from something called "essential tremors" similar to parkinsons. As I have it, it looked the same.

Great video Zach. If you are considering chains, you might want to try Terra Grips (Amazon). They won’t scrape up your driveway. I speak from experience....

@SunnySlopeHomestead

4 жыл бұрын

sjcotey I’ll purchase chains already but I’m gonna check them out still. Most my drive is gravel anyway but thanks for the suggesting and looking out 👍👍👍

Your title had me so worried. Whew! Glad it was fixed. The customer service at that particular shop was not represented very well by Zach. I get being busy, but a call back would still be nice or at least a head's up that he is so busy that the best way to reach him would be via email. Just saying. At least it was ultimately well taken care of. Do you plan to plow your road as needed too? Or does the county/city come in and do that for you?

@SunnySlopeHomestead

4 жыл бұрын

He’s really young and let’s say he knows who I’m from when I bought the tractor. There a story behind the whole ordeal which I will share in another video. They are the only folks in town so I was stuck with them lol

Just got a BX23S, with a BX2812a blade. Need to get a set of skid shoes for it. Did you get yours from the dealer? Or did you get them from someplace that sell truck plows? Hope for a late season dump of snow so I get a chance to play.

@SunnySlopeHomestead

4 жыл бұрын

We purchased it with the tractor from the dealer and once I found the float option and the shoes it work great 👍

@Beav014

4 жыл бұрын

@@SunnySlopeHomestead Thanks so much. Only used it to push snow once, but I find the cutting edge digs and trips the plow in float. Shoes should help with that, and maybe switching to a rubber cutting edge. Liked and subscribed.

Not a Kunota issue it's a dealer issue I have the same plow on my BX and as you said the cylinder ts backwards they send these plows to dealers in pieces and they put them together but they come with books that show how it goes together they should cut you some kind of deal on your next service or parts, I had a hose on my loader that never got pur on right and it bent the steel line on the arm they came out fixed it and gave me 15% off next purchase at their dealership. Also had a tire that kept going flat since new and they could not figure out why and it was the weld where the rim was put together they replaced it with new tire and rim and welded rhe one that was on the tractor so now I have a spare. great service from dealer brings in customers poor service and playing phone tag loses customers.

Should have bought a Deere LOL. You have a good tractor to go along with you Great attitude. Enjoying your channel

@SunnySlopeHomestead

4 жыл бұрын

I wanted to go green but the cost was way high for me and anything at this point will work lol

@jakewhitney8201

4 жыл бұрын

You mean should have bought a yanmar...

@SunnySlopeHomestead

4 жыл бұрын

jake whitney hey if it’s $150 bucks I’ll buy anything lol

@tlclandscaping8455

4 жыл бұрын

Why over spend on a deer ? The name yes

It only goes to show your never to old to learn it's a life long lesson, that's coming from an old guy.

After sales service is so important and its what keeps ou going back to the same dealer

@SunnySlopeHomestead

3 жыл бұрын

Agreed 👍👍👍

What you do is you call them when you are at the dealer, and when they don’t answer their phone you are right there to confront them. They hate when you catch them in a lie.

@SunnySlopeHomestead

3 жыл бұрын

Oh I like the way you think 🤔😆😆😆

@nocoolname32

3 жыл бұрын

i did that with best buy once, showed them my phone and that i had been waiting for over half an hour and then pointed at 6 different employees doing nothing and asked why no one was answering the phone, THEY BLAMED CORPORATE BAHAHAHA.

It's understandable how you reacted as we all would have done the same thing, great that Kubota came out and fixed it very quickly.😃

@SunnySlopeHomestead

4 жыл бұрын

That was shocking given the fact we don’t have the best track record with each other lol

How frustrating. I'm glad it worked out finally. Have a great Christmas 🎄

@SunnySlopeHomestead

4 жыл бұрын

You have wonder Christmas as well and thank you

Are you happy with your tractor comparing the 2680 vs the massey 1725m currently

@SunnySlopeHomestead

4 жыл бұрын

Yeah but I wish I would have bought more accessories

A wise man would never hook up hydraulics with the engin runnin, 2 relieve the pressure on the lines after the enging is shut off by acuating the control levers, and the old lines I always bumped the end of the hydrualic fitting of the attachment releaving any pressure in the hoses, note put a rag over the end of the hose/fitting it makes life easier.

@SunnySlopeHomestead

2 жыл бұрын

Lesson learned , thanks Ward 👍👍👍

Kubota has my stirring cylinder for 4 weeks now still has not fixed it they tell me can't get right parts.

@SunnySlopeHomestead

4 жыл бұрын

Man that’s sucks , sounds like a bunch jack wagons making excuses up there .hope my dealer ships isn’t that bad if I start have bad problems

Sad to hear that Kubota treats owners like TYM treats it’s customers. Ocala Tractor in Florida kept my TYM T-224 for 2 months.

@bigdickrick3107

3 жыл бұрын

What needed to get done

@pedrorivera4191

3 жыл бұрын

@@bigdickrick3107 they found a lose wire and waiting for a part

Who did the Pre Delivery on that plough? Big NoNo to use tape with hydraulics!

Hell of a dealer.

Have you been on the kubota web site.. they have all the parts books and manuals online ...

@SunnySlopeHomestead

4 жыл бұрын

Not yet but I’m sure I’ll be head there soon lol

I would buy my L3901 again in a heartbeat.

I just used the loader to plow snow

@SunnySlopeHomestead

4 жыл бұрын

I thought about that but the shoes is what I needed to save my gravel. Felt like the easiest way to go. The plow option wasn’t that much more.

@countrymorgan2942

4 жыл бұрын

Mountain View Turning only used the plow the first year with my 23S, sat gathering dust the last two winters.

Things like that PISS the bleep bleeping outta me.. you spend all that money... and once they have your money or your signature... Your nicer than me... They treat you like an after thought.. geeez Have a great evening 🎄⛄⛄🎄

@SunnySlopeHomestead

4 жыл бұрын

Oh there’s a bigger story I plan on sharing about the whole buying part but I want to save it for a review later

Daniel at arms family loves gp rents that has kubota products they seem to help him lots

@SunnySlopeHomestead

4 жыл бұрын

This is more of a shop issue than a brand issue. They really need to get their stuff together and as a manager my self it kills me to see it ran so badly. Image business is so good you turn away customers... can’t wait to tell my story of buying this tractor

The part I appreciate most about this is a company that sends the person responsible, no matter who he is, to fix it. I bet he'll never send another out the door that way!

@SunnySlopeHomestead

4 жыл бұрын

For sure and he was very apologetic. I did help him install the parts but that’s cause I don’t mind and like to work on stuff.

@angusblack9900

3 жыл бұрын

Why do you have your salesmen putting equipment together. A kubota dealership should be able to afford mechanics.

It's good you didn't have to take it in. it would of been a long wait. BTY watch putting weight on the legs when taking the loader off you well bend them. Try tilting the bucket down a little and putting the weight on it and after you pull the pins then let it down on the legs.

@SunnySlopeHomestead

3 жыл бұрын

Yeah I got a lot better at that lol

Yah my impression with Kabota when I was looking for a tractor was they didn’t give a rats ____.! If you bought from them. They tried selling me a tractor at full price and the tires were rotated. I mean it had been sitting on the lot for so long the tires were cracked to the point I was concerned they wouldn’t hold air once the tractor was moved

@SunnySlopeHomestead

3 жыл бұрын

Oh man that’s a bummer

my friend has trouble with kubota all the time so i bought john deer

Get a rear scraper blade And chains. I have scraped a 900 ft driveway for 15 years no issues. Quick connect is ok but I would not pay extra for it. 25 HP Kubota is a small tractor these days. Our L2800-2004 was a different breed of machine. I just bought a 35 HP Kioti. We always use chains in winter.Kubota .ours ,wasa good tractor but the prices these days are incredibly high on new models and the HP selection was meagre.

It shows we should all look over our equipment before we use it.

I think that was the salesman that sold me my tractor, nice guy I thought. The service manager was the problem.

@SunnySlopeHomestead

4 жыл бұрын

Same here 👍

Beyond chains you could look at weights and "Rim Guard" to add internal weight inside the tires . Not sure who does it in your area , Keep on Tractoring .

@SunnySlopeHomestead

4 жыл бұрын

I was thinking of that as well 👍👍👍👍

@wandagallivan3846

4 жыл бұрын

We generally use calcium chloride for ballast , extra weights as well , but from the look of your blade mount I might be hesitant to . It looks a bit fragile, I might be out to lunch , all I am used to are degelman and leon blades that mount directly to the tractor frame

I have a B2650 with a blade and had almost the same issue with my blade! On My blade the ring coupling on the end of the cylinder shaft snapped off as I was plowing snow! The issue is I think it’s a design flaw because they had to weld on two little pieces of metal to stop the cylinder from coming all the way to the end! All the stress of pushing the snow is on that cylinder as you’re plowing! Why I think it’s a design flaw is because they shouldn’t have to weld on two pieces of metal on a brand new two week old plow! Wow Plus The next larger size plow designed for the 3300 tractors have two cylinders one on each side and I even think that this plow should have two cylinders it’s a large blade!!! I even called Kabota corporation and I tried to complain and tell them it’s a design flaw and they basically wouldn’t talk to me!

@SunnySlopeHomestead

3 жыл бұрын

Now I have to check mine lol thanks

That sucks! sales doing installs?

@SunnySlopeHomestead

3 жыл бұрын

Yeah they were short handed for sure

I don’t think this is a orange tractor issue only near me I have another dealer who doesn’t care after the sale what happens to the equipment they just sold UNLESS you’re a huge farm and it’s “Johnny” on the spot to fix it. I got a b2650 and my dealer is great because of the other dealer practices towards customers of the other company. No regrets on my purchase

@SunnySlopeHomestead

3 жыл бұрын

100% agreed

No owners manual that shows depiction of hyd ram ?

@SunnySlopeHomestead

3 жыл бұрын

No install instructions where handed over from the dealer

Gotta have a Tractor in order to have Tractor Problems! Damm Lawnmower guys lol

@SunnySlopeHomestead

2 жыл бұрын

Get it man you’re jealous , it’s ok. Someday you’ll be able to make in the real world 🙌

The repair-person didn't have his own tools ???? He could have checked an in-house plow and had wrenches of the correct size with him. Especially metric stuff. What made him think that the customer would have correct tools ? Good grief !

@SunnySlopeHomestead

3 жыл бұрын

Yeah he was just a sales man but it was that or take the tractor in and not have it for god knows how long lol I even after to repair it myself , just give me the parts

I had a quick fix on my John Deere they had someone out 2 hours later

@SunnySlopeHomestead

3 жыл бұрын

That’s great service right there 👍

they are all the same i had a problem with the switch on my seat and they said it was under warenty but they had to order it and they forgot to they will kiss your ass till they get you to sighn the papers

Your buddy made the right choice with the Mahindra

@SunnySlopeHomestead

4 жыл бұрын

Right ! We’re still looking for a fender that doesn’t cost $150 , after market isn’t there yet for those tractors

Time to look for another dealer

Next time you need a Kubota tractor or equipment come to Ewald Kubota here in Seguin Texas we are number one

@SunnySlopeHomestead

3 жыл бұрын

Boom god bless TEXAS

That’s good advertisement for Kabota just because they sold you a piece of equipment doesn’t mean that that’s the end of the sales they have to service it and make sure it’s right and that should’ve been repaired before it even left the shop don’t they expect their equipment I work for caterpillar dealer for over 15 years and we we got a pre-check make sure everything works and once a while stuff slips am I I understand that but a cylinder on backwards a good field mechanic would’ve caught that no time

@SunnySlopeHomestead

4 жыл бұрын

Yeah they are a mess up there at the deal but I can’t be mad since it was fixed. If this would have happen with a full snow I’d been fit to come lose on them lol

I am so glad you got it fixed. You are so funny.

@SunnySlopeHomestead

4 жыл бұрын

Me too and thanks 😊

Hard plow should be m or l not h range. Everyone wait to last. In to. To bad my kubota dealership is great and on my 3rd tractor

You better think about getting chains if your going to push a plow.

@SunnySlopeHomestead

3 жыл бұрын

Bought a full set but only use the rears if at all

Paint (product) only as good as the dealer.not pre delivered correctly.38 year kubota tech

your tractor is a nice one but the dealer sucks and the dealer in my area is the same way so i bought a JD customer service is great

@SunnySlopeHomestead

3 жыл бұрын

It’s hit or miss around here

Hi favert family ❤️❤️

You know brand new just means shiny...dosnt mean it's going to work any better. I'm sure you also know the warrenty is only as good as the people performing it.

@SunnySlopeHomestead

4 жыл бұрын

BS 6 one way half a dozen the other way it is what it is but yes you’re correct

You'll get this with any brand, there's problems with them all.

@SunnySlopeHomestead

3 жыл бұрын

Amen to take 👍👍👍

watch al lumnah put his chains on he has some tips and tricks lol

@SunnySlopeHomestead

4 жыл бұрын

Heading that way for sure cause I have no clue lol

Wow I own john deere 4066 broke it 5 times already and they come get it fix it return it free of charge

@SunnySlopeHomestead

4 жыл бұрын

john kovac nice , what are doing to the poor machine to break that much lol

@johnkovac4436

4 жыл бұрын

@@SunnySlopeHomestead working like the beast she is lol

See even you learned something, it's not the end of the world there are far far worse things to deal with for sure!

@SunnySlopeHomestead

Жыл бұрын

Agreed

Load it and drive over they can look at it for an estimate to repair

Why the hell didn’t you get the blade for the lift arms? Look at all the extra crap you had to deal with, instead of just using a skid steer attach blade.

Shut the engine off and wiggle the joystick. Relieve the pressure. Your first day or what? Lol

@SunnySlopeHomestead

2 жыл бұрын

Yes , just started today 🤣🤣🤣👍

Bet your ass you bring it to Kubota ! They sure didn’t give you that tractor for free ! And yes, more than likely, someone at the dealer level didn’t assemble it correctly. A pain in the ass, but shit happens. Stay on their ass at the dealer level. The fella you’re dealing with is mediocre at best. You would think a new cylinder would be a given. You didn’t over react. The money you paid for this unit is SERIOUS money!

@SunnySlopeHomestead

4 жыл бұрын

Couldn’t have said it better 👍👍👍

The cylinder is definitely on the wrong way

@SunnySlopeHomestead

4 жыл бұрын

That’s exactly what was wrong but one would think the cylinder was right , it looks funny installed the right way

Called Kubota...and....they told you to ram it sideways...situation normal.

@SunnySlopeHomestead

2 жыл бұрын

New dealer management is much better now. They must have cleaned house

Why not just use the bucket like I do. I wouldn't waist my money on a plow I didn't need.

@SunnySlopeHomestead

3 жыл бұрын

I need to be able to angle the snow in different directions on my drive

What’s funny is you were plowing a 1/2 “ of snow ❄️ when that happened! Lol 😂 I plow snow with a Trusty F-350 & Boss V plow . Never an issue .

@SunnySlopeHomestead

3 жыл бұрын

Must have missed the part when I said I was testing it out before a big snow but that’s ok 👌 check my over videos on how well it did on plowing

Why not go back to Kubota?? Geez, that is the first move one would think. But it’s easy to see why you were hesitant. Your kubota dealer blows!! Glad that you didn’t go red line - not worth it.

Lmao. Like that tractor would move 3 feet of snow

@SunnySlopeHomestead

2 жыл бұрын

It’s shows you don’t own one

Terrible they send an 80yo man out there to do that lol.. least it’s done!

@SunnySlopeHomestead

3 жыл бұрын

That shop is a joke and it was his screw up is why they sent him. I helped him install the part but yeah

Definately take it back, it may well as you say be a manufacturing problem they may not be aware of.

@SunnySlopeHomestead

4 жыл бұрын

I was afraid that maybe some jack wagon welded a bracket in wiring lol not the case thank god.

NO TRACTOR IS PERFECT , U WILL HAVE SOME BUG IN ALL TRACTOR , WHO EVERYPUT KUBOTA TRACTOR TO GET OTHER WHERE PROBLEM