Every time I see a small tractor on its side the loader is raised up high. I never move my tractor unless my bucket is as colse to the ground as I can get it.

Impressed with your positive attitude and your work ethic.

Ol' guy here. Been turning wrenches for bout 45 years now.Pop the injectors out then crank with the starter.A lot of fluid will blow out:probably 100% oil. If you don't remove the injectors and there is ANY oil on the piston tops you will trash the engine when you turn it over either with the starter or a wrench on the flywheel with the 4' cheater that will eventually be used. And why the heck was the loader raised so high where you had the tractor? Rough uneven ground, narrow wheelbase tractor: keep loader LOW or: well you now know why.

@nolanklein3370

5 ай бұрын

I’m going to pull injectors and crank by hand. Tractor was only tipped for an hour so it shouldn’t be too bad. I was pushing the limits of the tractor.

@oldfarmer4700

5 ай бұрын

Real old guy here and been farming my whole life. I’ve been to several funerals over my life because people were pushing the limits of tractors. Years ago tractor were only found on the farm and accidents were enough then but now day everybody it seems has one and accidents are way more often. Center of gravity on a tractor especially a little one like that with loader up and the weight of those pallet forks and uneven ground your lucky is all I have to say. Have a neighbor does the same thing, bush hogs real uneven ground with heavy pallet forks and first thing he does is raise the loader as high as it goes. It’s just a matter of time and his will be on its side too. Lucky thing for him is he has a family cemetery he started on his property if he needs it.

@amossnowdaharleyman9179

5 ай бұрын

@@oldfarmer4700 good post and so true.

@hugostiglitz8465

2 ай бұрын

​@@oldfarmer4700Agreed, based on what I saw he had the wrong tool for the job. I would've rented the excavator for the tree work the cleanup the brush on the ground with the tractor. A grapple sure is nice for brush work.

You had your loader boom all the way up in the air just before you tipped it over. Keep your loader down low as much as possible. You were lucky.. With as much clearing as you want to do with your subcompact you need a grapple. with a grapple a lot of times if it's tippy you can quickly drop your loader with the tree grappled and save yourself unlike with your forks cause you can't clamp your trees. I have had a grapple for about 20 years so I've been there, and haven't turned my 45 hp tractor over yet. Been close.

Good Recovery thank god nobody was hurt. It happens so fast eh...Thanks for sharing, Cheers Mike

@nolanklein3370

5 ай бұрын

Thanks 👍

I rolled my Kubota B a couple of months ago. It wasn't a slow roll it happened very quickly. I ended up with a torn rotor cuff.

That's something you try to avoid but accidents do happen. Glad you had the Roll Bar to help keep you safe. I hope I never do that with my J.D. 750 with loader. Glad you didn't try to start it and sounds like it will be fine.

@nolanklein3370

5 ай бұрын

I always recommend keeping the rollbar up. I even have it up on my zero turn all the time

Nice video. I agree with the others about the forks being high, but sh-- happens and you learn from the experience. I have almost tipped my compact tractor on multiple occasions. Keep up the positive attitude and keep putting out content. Thanks for the Video. Subbed, Liked and watched complete. -Tod

@nolanklein3370

5 ай бұрын

As we all do, I did push the tractor to its limits, always. As seen in my other videos

Thanks for showing all of us that this happens the blink of an eye , glad your ok.

@thegreatnorthwoodswithbb2863

3 ай бұрын

Specially when you're not experienced... Beginners luck. Bad luck that is

Ballast the rear tires! And it's a pain but every time you start to turn lower the bucket or the forks. I like at the end of the video you said ... That went pretty good 😂 🤷‍♂️

My Kioti CX2510 doesn't fit in my garage unless I put the ROPS down and I often forget to put it back up when i drive it out of my garage and this makes me want to make sure I always put the bar up when I'm using the tractor. Glad all is well.

Don't use the starter to turn it over. Use a socket on the crank to feel the resistance. I'm sure there are other YT videos on recovering from a tip over.

I’m glad you’re okay

At least nobody got hurt and you are smart enough to know not to try and start it right away . Hope it works out ok .

@nolanklein3370

5 ай бұрын

It was tipped for about an hour, so I’m gonna let it settle for 2 days. When I go to start it, I’ll pull a glow plug or something to relieve any pressure if there is some oil on top of pistons.

Might as well grease those hard to get at grease fitting while there handy😅

Hope you have good insurance, you are going to need it!

I’d say based on where those folks where you leaned a valuable lesson. Glad you weren’t another tractor statistic.

Should have used the roll bar to right it, keep the loader down centre of gravity is kept down

50 years with tractors haven't rolled one yet.. had them on 2 and 3 wheels many times.. just need to know when to compensate with the loader

This is why you never have the loader all the way up on uneven ground.. even though it's still surprises me doesn't look that hilly

What possesed you to pick that MIND NUMBING Diatribe Tune ??

It's easy to see how you dumped it. Look how high the bucket is!!

@thegreatnorthwoodswithbb2863

3 ай бұрын

Lack of experience... You learn after you roll them once or twice maybe😂

There's a lot of people who buy equipment that have no😮 idea how to run it and that's why this happened .

I bealive the Bush hog is not for this model..looks bigger...so if it find a root that didn't trimmed make the tracton wheeling and with the fork that High combined with the field angle...there you go flipin!! Be careful respect the machines

I live near an old stagecoach road. Maybe we’re neighbors 😁

@nolanklein3370

5 ай бұрын

Possibly!

💪 STRONG 👍

To increase your stability fit dual wheels. You will be shocked at how much more secure your tractor feels. Look at Click duals or an other form of quicktatch connection. I have driven little tractors(30hp), and compared to the ag tractors they are horribly tipppy.

@thegreatnorthwoodswithbb2863

3 ай бұрын

Dual wheels?? That's a newbie move.. learn how to run the tractor.. Dooley's 😂

@cjones1262

2 ай бұрын

We use wheel spacers and tire ballast. Have a kubota b3030. They are very tippy from the factory. Ours has a cab and makes it even worse.

It doesn't take much of a hole or log combined with an already sloped path, but I haven't done it....yet. It looks like your forks being high up didn't help :)

Gin pole and a winch will get that upright

Great safety training video with about SIX major mistakes. Apparently neither operator has much equipment experience. Also very little mechanical knowledge, as the injectors or glow plugs should be pulled, engine cranked, then reinstall parts and fire it up.

Im Wald sind schon ganz andere Fahrzeuge auf der Seite gelegen. Aber warum man sich das mit diesem Spielzeug antut ist mir ein Rätsel. In meiner alten Firma hat ein Kunde fast einen tötlichen Unfall mit seinem Hoflader im Wald gehabt. Diese Fahrzeuge kämpfen schon in der Ebene auf fester Fläche im Bereich der Lastgrenze mit der Standfestigkeit. Lass dir das eine Lehre sein.

fiabilité sur les bx de chez kubota , a 2500 h boitier de direction a changer sur bx 2200 et bx2350

When your dumb you’ve gotta be tough

What!? Boat in the woods!? Is it only me wondering how that got there?

@nolanklein3370

2 ай бұрын

Not sure, but I’m going to have a video soon on pulling it out of there!

That tree felling was very dangerous looking It looked like it could have went anywhere

@hugostiglitz8465

2 ай бұрын

Especially dead trees, they can break off when you start cutting and go anywhere.

Get some wheel spacers!

@nolanklein3370

5 ай бұрын

Check out my other videos! I actually did install them. Definitely help a lot, but not in this case.

@thegreatnorthwoodswithbb2863

3 ай бұрын

Why? Probably wouldn't have made a difference with the operator error. Too much stress spacers.. but all the amateurs want them I guess

How did start after all that?

@nolanklein3370

4 ай бұрын

I let it sit for three days and I figured I’d give it a quick crank and it started right up. It actually didn’t smoke or anything. It was only on its side for approximately an hour.

@tacomafan7488

4 ай бұрын

@@nolanklein3370 COOL!!!

There was definitely a better way to put it upright, you had excavator, lift it from far side,duh😮

@brettgofgosky1911

3 ай бұрын

Push on back and bend shit up

Man was stealing road signs

@nolanklein3370

26 күн бұрын

I’d say he was!

Loader to high while moving......Big no no

Leave the logging to people that know what they are doing. U get off flat ground with that little kubota you'll get hurt. U want to play logger you will get hurt.

Starting and stopping your engine will kill it. No , I am not going to watch the whole thing. carry your bucket always below the hood line. Years ago someone rolled a Ford 1700 carrying sawdust. Bucket was up to high. Judging what I see you don't need to brushhog. A small trailer will work for moving the boat. cheers

Pero que isistes no te lo presto MÁS No vistes el tronco ja ja SALUDOS

Sorry but this Trekker is not for Wood!!!!!!!!

They are not PINE Trees they ARE BALSAM FIR. If you can't get it right refer to them as evergreens........ To small a tractor for the job.....

@nolanklein3370

5 ай бұрын

I found out they are basically Christmas trees planted years ago and got too big. I didn’t know till after I recovered tractor.

Gotta keep them loaders low.

Sale the tractor while your still alive and walk away before you get killed by a tree or flipping the tractor again and not be so lucky the second time

If you have to push the tractor to its limits on a regular basis, you need a bigger tractor.

@hugostiglitz8465

2 ай бұрын

For this job I would've used a 30k lb cab excavator with thumb I wouldn't even attempt this with my tractor at all. The tops of the trees can break off coming down onto your head..that's why they call them "widow makers".

@nolanklein3370

2 ай бұрын

I do wanna get bigger equipment. Gotta start somewhere. I do wear a hard hat and as much protection as possible

Kubota sells this stuff knowing who is buying it and how they are using it. High dollar Tonka.

Get different music or no music

You can't fix stupid..