Diff lock has a safety feature to prevent breaking the tractor. It can only be used while the wheels are straight. If you turn the wheel it will disengage, if you have the wheels turned, it won’t engage.

Great video! I picked up an 2023 model last month and it has the same characteristics as yours. 3pt is exactly as yours. Thanks for tip on fuel screen!

@TNYankee2020

Жыл бұрын

Thanks for the feedback on the three point I was starting to think I was crazy or I needed to make an adjustment. It’s pretty sloppy.

Great video. Thanks for posting. Lots of good info... 😊

@TNYankee2020

Ай бұрын

You are most welcome, thanks for watching. Glad it was helpful.

Hello Tennessee Yankee. I really enjoyed your review. Same layout as our B2601, just a bit heavier and a bit more lifting capacity. Also, the same loves, and complaints. I put a little adapter on the treadle peddle, which allows me to put my toes under it when using reverse. It was a hugh improvement in comfort when using reverse. I think you were quite wise to add fluid to your rear tires when you bought your tractor. I recently did that to ours, and noticed a remarkable difference in the feel of the ride.Thanks , Ben

@TNYankee2020

Жыл бұрын

Thanks for watching and for the great feedback, I was very intrigued by your treadle idea, so I looked it up on KZread and low and behold Saw your video. Did you have to heat up that rebar that looks pretty thick?

@whenworkisplay

Жыл бұрын

@@TNYankee2020 Good morning Jeff, the rebar I used was 1/2 inch if you measure it at its widest point. I didn't have to heat it. I bent it in the vise using a length of pipe for extra leverage. I made the loop that goes over the peddle first. Hope this helps, Ben

Nice job - I liked the video 👍

@TNYankee2020

7 ай бұрын

Thanks 👍

Good review. We got the same model this past April and have about 130 hrs on it. Ours has been (and is currently) in the dealer shop multiple times. Got the Land Pride top & tilt kit installed for the 3 point, which we had significant drift down (both top link and tilt link) problems with. Our tilt steering wheel continually randomly pops out of position, which is one of the reasons it’s currently in the shop.

@TNYankee2020

7 ай бұрын

Sorry about your issues. Thanks for providing feedback.

great video. You have some great ideas.

@TNYankee2020

11 ай бұрын

Thank you Sir. Appreciate it. Just subscribed to your channel. Happy Tractoring.

TY, Great video with a lot of tips and information. I will definitely invest in the gas tank screen as you stated there could be particles in the diesel or can. I have a 2610 as well and have had a couple of issues with the fuel cap. I have the cab model which has a high center of gravity so the wheel spacers are another great tip I must invest in. Thanks MM

@TNYankee2020

Жыл бұрын

Thanks for watching and the great comments, you’ll really like those wheel spacers

@mikeneeley1836

11 ай бұрын

I also have the cab model and had them install wheel spacers when I bought it. Highly recommended!

I enjoyed your video man. I have the same exact machine. Picked mine up September of 2022. Only other grease fitting I can think of is under the floor for the brakes.

@TNYankee2020

7 ай бұрын

Thanks for watching appreciate it.

@danielrapoza8468

Ай бұрын

I'm thinking that the treadle pedal has a Grease zerk too. It is also under the floor. 😊

Nice review! I’m on the other side of the mountain from you (WNC) and bought a Yanmar. I loved the LX. On the topic of front spacers my thoughts are that since the axle pivots at the center I don’t believe you would gain much stability. My old B7100 HST went to my son after serving me perfectly for the last 30 years.

@TNYankee2020

Жыл бұрын

Thanks for the feedback. Happy Red Tractoring 😀

@cogentdynamics

Жыл бұрын

@@TNYankee2020 my Kubota dealer (Asheville) told me that the LX with a mid-mount mower option wasn’t available without jumping to the 30hp model with the exhaust filter/regen and associated cost. The tractor was too big and too expensive for me. The B series has significantly less loader capacity than the red option and I really need that for the forks in my application. Too bad, I really like the dealer, they are great. So far so good! Keep up the good work on the videos.

For anyone loooking at the lx2610, please note: rearend is made of aluminum as well as most of the gear box. I higly recommend You check out the l2502 for $2500. It is heavier but the l2502 is pure metal. Hope this helps someone.

@TNYankee2020

4 ай бұрын

Thanks for sharing your perspective

Get yourself an ammo box, real to holes in the side of the ammo box and mount it to your bar on either side of the tractor. Just thought you’d like to know.

Hello there Tennessee Yankee, awesome review, great detail. The R14 are excellent tires, I have R4 on my tractor. What brand wheel spacers did you get? My range selector for the 3 point is doing the same. You've got to get yourself a spinner knob for your steering wheel, you'll be impressed with how well it works. I haven't cranked my throttle up that high before. l need to give it a try. Excellent tips. I agree that the steering wheel boot pops out to easy. My diff lock has never been an issue to depress. I use the Bx knobs to tighten my ROPS, since it tooless I can easily loosen them to put my ROPS down before parking in the garage. Recently my fuel filler cap has become a real pain to thread on as well. Great idea to have the ability to install a winch. I think I may set one up on the draw bar. You got that right, the oil dip stick is hard to find the 1st time. The brake and 3pt also have grease zerks. Keep on tractoring!

@TNYankee2020

Жыл бұрын

Hey Paul, thanks for the comments. Yes I probably should get a spinner and second nature to me on my lawn tractor, but never really think about it much on this guy. I’m usually at the highest RPM every time I come up my hill and heavy lifting, I’d say I’m running max RPM about 30% of the time. So I looked up the wheel spacers on my invoice, and here is the number. B8785. They are 1 3/8”. Have a good week.

@JelenOutDoors

Жыл бұрын

@@TNYankee2020 Thanks I shall look into the wheel spacers.

Great video. I went and bought that same John Deere filter and it did not fit in my tank. It was to big. I have a 2023 B2601, I guess it has a different cap than than LX model. Bummer.

@TNYankee2020

Ай бұрын

Thanks brother, yeah sorry that didn't work for you. Definitely different as mine fits like a glove.

I have an L3902 and my 3-point lever does the same thing where when I raise it starting from 1 up to about 5, I don't notice it really raising at all until it reaches the #5 mark. Very odd.

@TNYankee2020

7 ай бұрын

Thanks for sharing.

you toe under the "forward" to go in reverse... so you don't have to use your heel.

Thanks for the good info TY! Many of the small items that bug you also bugged me on the B model I bought new a few years ago. Especially the range shifter. Currently live in Kingsport, so, understand the hills you deal with. Cheers!

@TNYankee2020

Жыл бұрын

Thanks for watching. Happy Orange Tractoring. 👌😀

Thank you for sharing your thoughts about your model. I look forward for SU model. No mid pto. What advice would you give someone who does want to save money?

@TNYankee2020

11 ай бұрын

Probably to not buy a tractor, cause you'll want to keep buying attachments :)

Nice Machine. Have you had any binding issues or bad performance from the loader joystick ? I’m close to getting this machine, and was hesitant due to the valve under the seat the joystick actuates . Thanks

@TNYankee2020

22 күн бұрын

No sir I haven't, thanks for watching. Still happy with it.

@1minibean

13 күн бұрын

Thanks - Just got mine. kzread.info/dash/bejne/lqtrvMaGetPKdJM.htmlsi=RNJ3HjgkulJH1mnL

I am considering a Kubota LX2610SU I dont need the mid mount mower. but I want to have a bush hog, tiller, loader, generator, and chipper. I am not going with John Deere too much plastic and propriatary loader attachments. I want to put a main battery disconnect on it and put some work lights i may put a canopy on it also.

@TNYankee2020

11 ай бұрын

You’ll be happy with it, I would’ve been OK with that as you but looking back it was six or $800 more for my model so I went with that obviously for the tilt steering the more comfortable seat and potential future resale value but I don’t think you can go wrong either way. Thanks for watching.

You can use off road diesel also

@TNYankee2020

9 ай бұрын

Absolutely, it’s just not very handy around this area for me. Thanks for watching.

You should run off-road diesel in your tractor is better for your tractor they say and also it is about $.20 cheaper per gallon just thought you’d like to know

@justinw.2376

Жыл бұрын

No difference between off road and on road diesel besides the lack of road tax and the red dye

@donaldstrishock3923

10 ай бұрын

The on or off road fuel is EXACTLY the same "fuel quailty" stuff. There is "one advantage "; the off-road fuel INSTANTLY shows water... it does NOT mix with the Red Dye!!!!

@lieutenantdangle3128

10 ай бұрын

Those days are long gone. The only advantage to running off-road fuel is no road tax.

26:39 ❤

@TNYankee2020

Жыл бұрын

Thanks glad it helped ☺️

Treadle pedal should have a grease zert mine is different B2920 2009 it has a zert for pedal. A couple //

@TNYankee2020

Жыл бұрын

Thanks for the tip, I'll check it out. Jelen Outdoors reminded us there is one on the brake pedal as well.

The 3rd function doesn’t come standard?

@TNYankee2020

11 ай бұрын

No sir, for me it was $1250 installed before I took delivery.

What dealer did ya get it from?

@TNYankee2020

10 ай бұрын

Plateau truck and tractor in Crossville Tennessee. Good people.