More people should make videos like this. The help page for Hondata is quickly brought up by pressing F1 and on top of that, their explanations are so good you don't even need to be a tuner. The KTuner help page is so useless.

@TrapGotRaided526

Жыл бұрын

The ktuner help page is absolute dog shit but you get wha you pay for.. almost makes me wish I did all the extra shit for hondata n spend more money if tht means good forums

The best one video, nice explanation and easy to understand. Exactly what I was looking for. Please continue ;)

Watching from UK I have experienced k tuner replies. Although they did help me get rid of a voltage error in a tune which took ages. Great video ❤

same with the emails they make you feel like you’re dumb if your asking a detailed question

@satchmo-k24

Жыл бұрын

💯, their customer service is trash

@iron-gamerstv

Жыл бұрын

@@satchmo-k24 Gotta say, this was the best showcase of Ktuner I've seen. I didn't understand half of the stuff. I just keep searching trying to figure things out. Thanks man. Keep up the teaching. 🤘🤝

Thanks so much for this video, Ktuner support are a bunch of snarky a**holes that just tell you to go to a professional tuner and waste your money. So in my 2.4l (k24z3) 8th gen Accord Coupe, Ive got the eFlexFuel kit and made the easy conversion to flex and it handles the tuning for the ethanol content but to go full e85 I need bigger injectors. So right now I’ve picked up a set of 450cc injectors from CleanInjection which should be big enough compared to my stock 310cc injectors but I’m having some trouble navigating the Ktuner software and finding what I need to adjust. In my Closed Loop Settings I finally found the fuel trim setting that has STFT min and max, and LTFT min and max like you showed on here. Not sure which I’m supposed to use for reference for adjustments to the cylinder fuel trim. And then when it comes to the MAF scaling (which you don’t seem to have on yours) I have the long horizontal chart of AFM Flow with voltages to g/s whatever that is and then the AFM Fuel with mg/stk to ms on its tables. This last one seems like that I need but I’ve no idea how to approach adjusting it. I’m just looking to safely up the injector size but I really don’t know what I should be trimming fuel from and by how much. Any advice you have would be greatly appreciated 🙏

@aceisuptonogood

Жыл бұрын

@macsethed123 Here’s an update, I went the way of trimming off cylinder fuel trim by -40% because my new injectors are about 45% larger and then they came with a flow chart and specific injector dead times so I adjusted the dead times as well, but after starting it up, the open throttle of revving it was fine but right when I let off the throttle and it starts to go down in rpm, it feels like it hiccups and then after it gets under 2000rpm it shutters and bunch like it’s going to die and then it eventually finds an idle again, nd that happens every time I hit the gas. Not sure what I’m the lower load/rpm range that’s causing it to almost die out but it’s not viable to drive. I reflashed to base tune and started it to see the stft results and it was trimming only about 30% off the larger injectors but still had the decel issue so I swapped back to my stock injectors and now it seems to drive relatively like it did before. Just need more tuning advice and knowledge to figure out what’s wrong and how to compensate for it 😵‍💫

@saiyangodkev5522

9 ай бұрын

Should of went all the way to 1k bro my base model full e85 on ktuner just need it pump and injectors

I think you need to make some more videos man. Enlighten us I’m planning on getting a hondata or a Kruger here soon abs I want to tune my self😁

This was probably the most useful/ helpful video for k tuneing. Thank you for all the help. I have learned so much from you. And I know I tried using k Tuner help, and it never helped

Amazing vid. Thank you for explaining everything in detail. I would love to see if you would help me with my tune.

@satchmo-k24

Жыл бұрын

I can bro, i couldn't get anyone to help me so I had to learn myself. I would never charge anyone for tuneing help.

@satchmo-k24

Жыл бұрын

Record a datalog and send it to me, explain what you need help with in the email. RAINMAKERK20@GMAIL.COM

@xVenomGamerx

Жыл бұрын

Sounds great! I’ll find a time to record the data and send.

@xVenomGamerx

Жыл бұрын

@@satchmo-k24 Hey i’m not sure if have gotten my last email, but my afr had a problem.

@xVenomGamerx

Жыл бұрын

Unfortunately Alex stopped replying to me for about the same time we started talking about the tunes (Three days). I have attempted to reach them several times on email and the original chat room of youtube. Sent a copy of my datalog and then got completely ghosted. I’m not saying to not trust them, but this is my experience with them.

Great video bro! How do I adjust throttle response off the start

I just bought ktuner rev1 for base auto. I wanna turbo and I’ve got to learn this on my own. Not many tuners on the island… most running flashes. I figure I’ll run k20a3 base map for turbo for now. Wish I’d known how sh1tty ktuner support was. I’ve got one here not out the box yet and already regrets. 😢

@BISONGARAGE

7 ай бұрын

Warning. The moment you change the map sensor to a 4 bar your auto transmission will lock up. You must stick with the stock map

Nice video just finishing up my kswap civic, car starts up fine ad idles normal for a second but idles up to 22k not sure why it’s doing this k24a2 stock any suggestions

I agree lots of cocky tuners out there, I mainly tune aem and hondata, been trying to find info on ktuner and check interface, but ktuner blocks you, have 05 type s normally get aem ems series 2/ infinity but it's my budget build, hondata mod kpro cost as much as my aem systems, figure give ktuner a try, see lots mistakes ktuner youtuber try show how to tune, ill til you this much tuning your two step as your first step not correct order, waiting for the ktuner to arrive, been thinking about starting a channel, maybe for my first series do ktuner walk through and how to street tune the proper way

Greath explanation, just one quick question. After your done modifying your tune how do you save it? In case u wanna try a different tune or modification and end up not liking it and want to go back to a previous tune . Thanks

@satchmo-k24

11 ай бұрын

Top left option bar, click the sub. menu, and just hit "save as",

@satchmo-k24

11 ай бұрын

Under the edit or file button at the top left, hit save as, I'm not around my laptop so I can't remember wich button lol

hey bro ive been stuck on a dumb question i have a 05 rsx base and have been wanting to turbo it but I can't find out if Ktuner is able to tune prop

@satchmo-k24

9 ай бұрын

Yes, with turbo a setup it all comes down to proper ignition/fuel tuning. Ktuner is a proper software to achieve this. 👌

I’m confused to why my disables/monitors menus aren’t working. I can only check misfire monitor. Same with ignition fuel cut

@satchmo-k24

3 сағат бұрын

@tylermcdonald3174 different series Ecus have different features locked & unlocked. Ktuner website shows ya what Ecus can do what. I scrolled threw it before I ordered my ecu setup.

Can you do another video showing changing fuel tables?

Good job . Where did you find info to learn from??

@satchmo-k24

Жыл бұрын

Evans tuning videos, haltech videos, fuel-tech videos, HP tuners videoz & trial n error lol

I have a question I have an a civic that’s running lean because of my short ram intake do you have a tutorial on how to bring the fuel up to even it out?

@satchmo-k24

28 күн бұрын

I doubt it's the Air intake causing it, fuel trims would correct a difference that small.

Hello. My vehicle is civic 1.5 t 10th. I downloaded 21 starter maps, but the region I live in is 980 meters above sea level. That's why it doesn't go above 19 psi. What can I do about this?

what part of indiana are you in? i got a k24a2 swapped rsx and could use a little help lol

@satchmo-k24

2 ай бұрын

Richmond, East side of indiana

all i wanted to do on my 11th gen si is to disable the rev hang and the support was an acehole and i still can't get it done nothing is working

Where do you adjust pulse with for colf starts? I'm on e85 and it takes a while to start

@satchmo-k24

5 ай бұрын

Doesn't have that feature, Here in Indiana during the winter, I just follow the so called "30% Rule". During the winter time i Add 30% more fuel to the "cranking fuel" table.

@BunnyBUNGALO

5 ай бұрын

@@satchmo-k24 thanks for the quick reply. I'll try it out, I adjusted all the fuel tables accept the cranking fuel table. The car runs great but just takes a while to crank. I just changed the settings, need to load it but hopefully it fixes it

@BunnyBUNGALO

5 ай бұрын

@@satchmo-k24 car starts up on the 2md try now! Thanks man! Shit was taking like 5+ cranks I was scared my battery was gonna die lol

Wanted to ask you I had someone set my tune up and I noticed he disabled my secondary sensor but I have a cat and secondary sensor will this affect the way my car runs? Can I uncheck or will it need retuned? Thanks 🙏🏽

@satchmo-k24

8 ай бұрын

You don't really need secondary O2, especially if you live in a non emissions regulatory state. The upstream wideband is all you need for proper tuning.

@xainazaan

8 ай бұрын

@@satchmo-k24 so will car run okay as I have a cat and the sensor still in place? But have it checked in tune to disable! If that makes sense. Thanks for replying

idk if its just me but i have a 08 si and v2 ktuner have an intake on it and throws a lean code. im trying to change the fuel map but it doesnt give me a fuel map option at all. wondering how do you get that? cause when i used hondata on my old civic it gave me an option for that. ktuner has yet to help either

@lilmonk0260

Ай бұрын

or if not anything what does tuning the ignition part do? does it change the spark or idk lmao.

@satchmo-k24

Ай бұрын

Contact, Mohamed Nabil on FB, he helped me get a ktuner sorted out. He's a Beast, he's a reputable cheap tuner.

Yeah Ktuner admins are the worst. The act like they don't want to help anyone.

What happens If my vtec engage speed and disengage speed are set at 0? I have my tsx k20A swapped and cracks vtec when it’s cold and go goes away completely, oil pressure is good the vtec solenoid is good tried 3 with new gaskets. The vtec just goes away and don’t know if it has to do with the tune.

@satchmo-k24

13 күн бұрын

@hei8574 that's a weird one bro, the cold temp vtec engagement is the clue you need to follow. That's what I would research. Vtec isn't supposed to kick in until operating temp is reached as we all know!

We need more videos, where's part 2😢😅

You ain't wrong man. The support is a joke. Made me wanna switch right to Hondata.

@satchmo-k24

7 ай бұрын

Yepp, i sold my ktuner & switched to fueltech, the black Friday deal right now was too good for the FT450,

@BISONGARAGE

7 ай бұрын

@@satchmo-k24 I almost did the same. Infact I intend on it still

@satchmo-k24

7 ай бұрын

@@BISONGARAGE if you do, use code "BoostedBoiz" & you get a discount. I used it when I bought mine.

How do you change vct settings and how exactly do you change fuel settings

@satchmo-k24

Жыл бұрын

I can add another video explaining if ya want

2009 honda fit added turbo bought ktuner it is shit rough jerking reaction when accelerating ohhhhhhh whyyyyyy

How are you my name is calvin, do you still answer questions I’m having a idling issue when I start the car it idles really low and then eventually come up to 950-1000 rpm when I turn ac on it drops to about 400 rpm do you have any suggestions

@satchmo-k24

Ай бұрын

You can either Add more Rpm too the "idle post start idle target" . Ktuner also has a "AC ignition timing feature you can add or Retard timing from for AC idle & driving compensation. More timing = higher Rpm, less timing = lower rpm at idle

@user-qv6wb1yq9e

Ай бұрын

Yes I added more idle on post start but when ac is off idle is to high, I am running the air idle control valve

@user-qv6wb1yq9e

Ай бұрын

Im running the k24a2 stock base map provided by turbogixxer on ktuner

@satchmo-k24

Ай бұрын

@@user-qv6wb1yq9e That map has all the options I told ya about from my previous response, I'm running a k24a2 also. Post start idle, ignition AC Tip in, base timing.

@user-qv6wb1yq9e

Ай бұрын

Thank you brother your video’s are extremely helpful you should try and do some basic tuning, I would be down

Any chance you can give me guidance for tuning my 2012 TSX?

@satchmo-k24

Жыл бұрын

What's up man, what ya need?

@cu2_jt131

Жыл бұрын

So my VTEC lower engage is 5000 and disengage is 4800 if I want to change it to where it engages at 4000 is that safe and does that mean the Disengage should be 3800 and would I need to change anything else?

@cu2_jt131

Жыл бұрын

And what about min temp, engage speed and disengage speed

@jeffreyadams9506

Жыл бұрын

Hey cuz I changed mine to 4100 high engage and 5100 low engage. The high number is Wot and the low is part throttle. I set the disengage at 200rpm lower than each value. This is for my 2012 si that has same motor and ecu as u

I know it’s been a year but on the rev limit my ignition cut is blocked I can’t click it 0:59 same with the fuel cut it’s blocked

@satchmo-k24

Жыл бұрын

Different honda Ecu's have Different features unlockable, that's why there is more desirable ecus than others.

@satchmo-k24

Жыл бұрын

Do you have Antilag option unlocked at the bottom? Antilag has to be turned on to mess with rev fuel cut.

What laptop are you using bro??

@satchmo-k24

11 ай бұрын

A shitty Dell P25T. I upgraded to a nice lenovo. The Dell was way too slow & the battery died wayy to quick.

You have more settings on yours than I do for.some reason

@satchmo-k24

Жыл бұрын

Each map has different features.

@mayk3lll

Жыл бұрын

Pretty sure it depends on which ecu you use. Some have mor than others from the research I've done.

@BunnyBUNGALO

Жыл бұрын

@@mayk3lll yea I figured. Kinda sucks

@mayk3lll

Жыл бұрын

@BunnyBUNGALO definitely does. I'm awaiting mine, picking it up this weekend so keen to see what its like. Got a tuner supplying me it but won't tell me which ecu it is. I have a AUDM cl9 accord euro

No part 2 😱

@satchmo-k24

Жыл бұрын

What do you wanna know about? I'll ask the other people that commented and put a video together as a part 2,

@Loyal_Honda_Fan

Жыл бұрын

@@satchmo-k24 well i guess a video that explain detailed how to adjust fuel and ignition tables for better performance, when explain to make it so easy and give the reasoning of why and how... That would be awesome, btw subscribed