KTA-200M + iLX-W650 PowerStack Step-by-Step Installation Tutorial
Автокөліктер мен көлік құралдары
A step-by-step walkthrough on how to install Alpine's KTA-200M Mono Amplifier on the back of Alpine's iLX-W650 Receiver with PowerStack™
0:17 - Intro
1:17 - Unboxing
2:42 - KTA-200M Closer Look
3:10 - Tools/Parts Needed
3:23 - Power Requirements
5:14 - Amp Mounting
7:38 - Amp Harness
10:57 - Amp Mounting (cont.)
11:38 - Radio Removal
11:59 - Install Radio & Amp
15:21 - Battery Connection
17:03 - Sound Settings
18:59 - Resources
Watch Part 1 HERE: • iLX-W650 Step-by-Step ...
PRODUCT OVERVIEW:
The KTA-200M Mono Power Pack Amplifier produces 400-watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space.
FEATURES:
Alpine’s Exclusive Dynamic Peak Power (DPP) Technology
Remote Bass-Knob ready with the RUX-KNOB.2 (sold separately)
PowerStack capable with the Alpine iLX-W650 (sold separately)
TECH SPECS:
Product Dimensions: 7” x 1.5 “ x 3.5 “
Alpine’s Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
200W x 1 RMS
200W x 1 RMS
400W x 1 DPP
S/N 80dB (ref. 1W into 4Ω)
THD+N 0.1% (ref. 10W into 4Ω)
Single-side 22-pin connector
RCA inputs (Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
LEARN MORE: alpineusa.link/kta-200m
---
FOLLOW THE ALPINE JOURNEY:
---
Facebook: alpineusa.link/facebook
Instagram: alpineusa.link/instagram
Twitter: alpineusa.link/tweet
KZread: alpineusa.link/alpinetv
#AlpineUSA #AlpineSound
Пікірлер: 35
My prayers have been answered 🙏
I’m glad i found this before getting the w650
A video for the KTA-450 please 🙏🏼
@MrNoahdean
3 жыл бұрын
It's the same mounting bracket as thr kta 200 so should be the same
I noticed you have recommendations for gain and LPF settings in the video for the KTA-200. Does Alpine have any recommendations for the gain and high pass filter settings for the KTA-450 paired with the IL:X-W650? The amplifier is currently bridged to power the front coax's only and the rears are on deck power. Thanks.
Which steering wheel control should I use with the KTA-450?
which speakers are recommended for this model?
How do I get the background to turn white while using Apple CarPlay? I have the solid white/black wallpaper and when I switch always dark to automatic it just stays black. I’ve seen KZread videos that show the white display when switched to automatic. I have the latest firmware on it. Thanks.
so there is no red accessory wire that needs to be connected to your after market radio harness i don't think i saw one for the eta-450 or the kta200 let me know thank you
What's the awg recomended for the kta-200?
Is the combo fit into a BMW e46 ?
I'm thinking about adding the 450 to the back of my radio but also adding a amplifier and a one singlet 10-in sub is this possible to do and have good sound quality out of everything
Do a video dedicated to the 450 with that radio please. I’m an idiot, and I need my hand held. 🤣
@AlpineTV
3 жыл бұрын
The 450 and 200M are the same chassis and mounting bracket so the bulk of the install would be the same in your case with the 450. Hopefully this helps get you most of the way there with your install.
My 2003 Camry says the radio no.1 fuse is 20amps but the radio no.2 (which refers to when the engine is off) is only 10amps. Would this radio be compatible because the radio no.1 is 20 amps?
Can a KTA-450 run in 2.1 mode? to run Fronts and a small sub?
I have mine hooked up behind my ilx-w670 and i spliced into the factory 12v battery for main power. It sounds awesome but my question is this. When it gets hot outside (summer temps) will i have problems with amp overheating?
Two yellows. One from head unit one from amp. Do i splice them together then to car harness?
Good morning! This may I bought a 650 Alpine but I didn't get the subwoofer do I really need it? The one that you attached behind. Thank you.
Hi do you know what is the max volume with out clipping?
So can I run my amp that’s for my subs as well as the KTA-200M ?
Just hooked up this unity to infinity components with tweeters in the front doors and infinity speakers in the rear and for some reason I only have the back speakers working.
@Shadowx011
3 жыл бұрын
Fixed…I had the dip switches set to 2 channel. Easy fix. :)
What a slick design Alpine! Yes, it rhymes… Edit: why does that usb cable face upwards? Must be the interior circuitry is my only guess?! 🇺🇸 🇨🇦
@thewhitefamily5515
4 ай бұрын
My question is why doesn't alpine have USB plug in on the face of all head units? I mean if a cheap ass 50$ Chinese head unit can do it why can't alpine?
Tried last weekend to install my ILX 650/KTA-200M powerstack into my 2016 F150. didn't succeed at all. I've been looking for days for someone who has done this and videoed it, but to no avail. Can't get an install appointment at my local dealer until OCTOBER. I've got a thousand bucks worth of hardware in the truck that won't power up. The "install guide" from Scosche is a joke. The alpine one isn't much better. I'm out of ideas. Oh yea...the travel mug you guys sent me arrived busted all to hell. UPS did a number on it.
I have the ilx-w650 and kta450 but I'm having trouble figuring out where to hook up the brake bypass I got off Amazon. Can anyone help with this? It's in a 2011 4runner
@thewhitefamily5515
4 ай бұрын
I can help. Hook the brake bypass to the yellow blue wire (the long one) and after that's hooked just install the amp as if you you didn't just install the bypass. Splice into your power/ground/remote and use speaker wires to attach to factory speaker wires on factory harness and your good to go
Kta 450 please
But some radios don't have that room behind it
The microphone while on android auto is horrible. I have updated the firmware and alpine support is no help.
I hooked my parking break wire to dash switch because fuck it
Goid
What a horrible design! No access to the Amp settings after you install unit.
This was useless.