Bro you’re a wood worker and a chef. Me too!

@ScurlockFarms

2 жыл бұрын

Heya Scott! Something about eating good food and making stuff that just brightens the day :)

Next time you make a cutting board you might want to think about not using so much water to clean the glue off because you can thin out the glue and your board may come apart if too much water can get in the glue joint. That was nice , looks like it could also be a door stop or a weapon.

@ScurlockFarms

3 жыл бұрын

Navarro - appreciate the tip. I had learned this trick (water to remove glue) from an instructor at Woodcraft years ago. I had asked the same question about the water weakening the joint and he indicated it shouldn't be an issue. Knock on wood (ha!) haven't had any issues with the joints. Go titebond go. Thanks for watching!

I’ve got the same exact planer, and it leaves very noticeable snipe. How are you dealing with that?

@ScurlockFarms

2 жыл бұрын

Seth, sorry for the delay in responding. Things have been a bit hectic out on the farm and I've been remiss at putting up more videos and monitoring for comments. I get a bit of snipe now and then but it's not been too bad. I'll typically run the piece through a drum sander at 80 grit then use a random orbital sander at 80/120/180/220 to smooth out.

@sethkiely9772

2 жыл бұрын

@@ScurlockFarms well there’s my problem. I don’t have a drum sander 😁

@ScurlockFarms

2 жыл бұрын

@@sethkiely9772 Seth, I've also used longer pieces of wood and cut off the ends with snipe, saving from having to do all the additional sanding. It can get pricy though depending on the wood!

Where do you get your wood?

@ScurlockFarms

3 жыл бұрын

Timothy, I get the majority of our wood for these types projects from Fine Lumber and Plywood in Austin. www.finelumber.com/ is their website. Prices are still very reasonable for 4/4 and 8/4 walnut/maple/cherry/purpleheart woods, which is what I buy the most of from them.

@timothymisner1907

3 жыл бұрын

Thank you for the information, much appreciated!

More glue

@ScurlockFarms

2 жыл бұрын

Maybe just a wee bit more... heh