KLR650 1 Finger Clutch
Автокөліктер мен көлік құралдары
Our KTM 790ADV and Yamaha T7 1 Finger Clutch kits have been some of our best-selling products. We've been swamped with requests for a similar kit for the most popular adventure bike in history, the Kawasaki KLR 650!
Unlike the KTM 790 and Yamaha T7, the KLR's clutch arm is welded to the clutch shaft. We had to design and produce an all-new arm and shaft. We're thrilled with the finished product, and you will be too.
The kit includes the following:
-Extremely tough 4340 steel shaft
-Stainless steel clutch arm
-Powder-coated, TIG welded, stainless steel cable guide
-Stainless steel clevis, clevis pin, and cotter pin
Benefits:
-Clutch pull is reduced by 20-30%
-The clutch friction zone is widened by 50%
-Reduced arm pump
-Easier modulation of clutch for offroad riding
-Reduced hand fatigue in stop-and-go traffic
-Quick and easy install
Confirmed fit on Gen 2 and 3 (2008-current) KLR 650s.
*International Customers: (outside the US and Canada)
All extra fees such as taxes, duties, tariffs, brokerage, etc are not included in the purchase price. Customers are wholly responsible for the payment of these fees!
camel-adv.com/collections/kaw...
Пікірлер: 25
I can totally vouch for the effectiveness of this mod. I wish this kit was available when I modified my own KLR 1 1/2 years ago due to the stress of the stock setup on the hand. I don't know how much longer the Camel arm is but with the stock arm lengthened by 13mm the pull weight at the center of my clutch lever went from 17lbs to 11 lbs. I use a shortened clutch lever so that is the weight you can expect when using two fingers. As usual, Camel thinks of everything especially the modified cable bracket which is essential for proper operation and component life. How about a 1 finger clutch kit for the KTM 390 Adventure! My wife will bake you a cake if you come out with a kit for her bike!
Just bought mine last week and it arrived today. It also came with stickers! I HAD to install it ASAP🐫. After removing the right hand side crash bars it took me a grand total of 19 minutes to remove the existing lever and bracket and install and adjust the new setup. This is a great improvement in lever pull especially with the shortened levers and old hands. Love it.
that was both informative, and an excellent addition to the KLR. Most important was the fact you guys are making forward and reverse compatible that is 100% why i got the klr. Thanks a ton for this.
Just installed, and I’m impressed. Extremely well made bit of kit that addresses one of the KLR’s most annoying quirks-the minuscule clutch throw. Really impressed by such a high quality part at a KLR rider’s price point. I’m not saying we’re all cheap, but, well, we are. Thanks so much!
@CamelADV
Жыл бұрын
I'm glad you're happy with the kit!
Installed mine on my 2004 last night. Very happy with it. Easy install
Ordered one. Looking forward to this upgrade on the KLR! Thank you.
This video goes into great detail on how to switch over to the longer arm. Good fix!
Great job on this sir. I know from the stuff I got from yall back when I had the Africa Twin many years back, everything you guys make is awesome. Thanks for taking the time to make this video and I hope your business continues to grow sir. Keep up the great work . Dale
Just installed mine and there is a definite improvement. Thanks for a great product
@CamelADV
Жыл бұрын
Glad you like it!
Great demonstration. I’ll be getting one soon.
I'm Disabled due to an accident. The Left side of MY Body does NOT work like it did from "The Factory". I purchased one of these after ACCIDENTALLY finding THIS Product online! I'll be installing is soon. Looking forward to seeing how it helps my Left Hand out!
Ah love it!
Nice, Cory! That's really cool that you are manufacturing something worthwhile for the KLR. I'm about to purchase one. Maybe introduce an auxiliary fuel tank next to make the bike have even longer range? I love the auxilliary tank on my WR250R. I would love to be able to get another for my WR250X...just sayin'.
Dang I could've used one of these a few weeks ago. We attempted some Winter time single track and my clutch fingers just about fell off!
Great video save for using vise grips on the cable. This job can be done without doing that , simply remove the cable from the lever or Leever up top.
@CamelADV
Жыл бұрын
The cable slides back into the sheath making it difficult to get the book over the cable end. We use vice grips with moderate tension so the cable doesn't get damaged. You can do it however you see fit.
Has anyone installed the 1 Finger Clutch kit on a KLR650 with a FMF Power Bomb Header pipe? Using the kit cable guide, I cannot get the nut back on the cable. I can install using the OEM cable guide, but I was told that is not recommended because using the OEM cable guide will have the cable running at a slight angle. It will cause drag and wear the cable prematurely. If you installed the 1 Finger Clutch kit with a FMF Power Bomb, I would appreciate hearing what tips or tricks you used. Thanks.
Will this work on my 1990 KLR650-B Tengai? I’m assuming it will, but just checking. Thanks!
@CamelADV
Жыл бұрын
I don't know much about that version of the bike. If the motor and clutch are the same as the regular KLR, you should be OK.
Need one for my DR650 - soon I hope?
@YoyoBandalore
6 күн бұрын
Check the Procycle website for the Suzuki Extended Clutch Lever Arm.
Bits and pieces? Parts! Parts! Bits and pieces sounds like reeces pieces bits and pieces f😊
Now you got a two wheeled donkey with a one finger clutch