this video is 10 times better than any install video ive seen from the OEMs, great work!

So great, I needed to remove a hood from a house, presto!

Wow, so nicely demonstrated most people can do it 👏 😀 👍 👌. Thanks for the tutorial.

Looks so easy

Awesome video

Fantastic video and instruction. Only flaw was the 20Amp circuit breaker on a 14-2 Romex feed.

Certainly you did make it easy for sure. Thanks for the tutorial 👍.

Funny you didnt show the nost important step, making the hole in the wall

@RealJoshBinder

3 жыл бұрын

I know! Right?

Great video

Thanks!!!

Great video as I'm not an electrician I may install the unit but leave the wiring I'm pretty ok with electrics but as I'm guessing a feed from fiss box may be required that is something that may not be fir me

Instructions are very good, wall plugs will not hold bent hood. I needed to cut plasterboard and put a cross piece of 2x4. I left protection on until the end, and it’s impossible to remove as the protection layer wraps around the back of the vent and main piece. I had to remove the vent then remove the protective wrap and the re-install. I had to loosen the main piece in order to remove the wrap which is wrapped around the back. Very frustrating.

@arenleafelker8801

3 жыл бұрын

Vent not bent sorry

I just heard a big bang while I tried to switch on the light on the hood, the whole vent stopped working now, Im wondering if there's a fuse that I can check please?

Moved into a new home. Noticed that the paint by the side of the rangehood is peeling/staining +- small cracks emerging around joint lines. There is silicone/sealant on the edges of the rangehood, which seems to be deteriorating/having gaps. Is air escaping and this is causing the issues? Do I just need to reseal it with more sealant? Is sealant use normal when installing rangehoods?

thank s

@repairclinic

6 ай бұрын

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

What should i do if theres no stud behind the template holes for hanging?

Como instalar campaña wirlpol

Hi I’m not sure if you’ll respond. Just installed my hood, I turn it off then I hear a CLICK CLICK sound as if the chimney is making a spitting down 2x Is that NORMAL?

Nice video but I do not feel comfortable installing such a heavy piece with drywall anchors. I would run backer board that is nailed into a stud that way you know its not going to come falling down.

@claypottinger7372

5 жыл бұрын

Backer board! What a great idea. I never liked drywall anchors.

@kevinhancock4064

4 жыл бұрын

@@claypottinger7372 I feel the same I fixed a tv to a dey wall before wasnt that heavy I think 16 kg ish but smtthubg over 20kg I'd be cautious I understand drywall is used everywhere these days especially new builds but it's all cost saving I'm not a fan undercoat and skim all the way lol

@jamesduff6937

4 жыл бұрын

What do you mean by backer board? You mean a layer of plyboard behind the drywall?

@brandonsoorjbully1553

3 жыл бұрын

Ugh mine just fell

@6string327

2 жыл бұрын

@@claypottinger7372 I put up 1/2 inch plywood around my kitchen wall area where the cabinets are going and range hood.

question, so when ur drilling holes in the wall how do u know if there is wood behind the drywall. what if its hollow and cant support the vent?

@joshgarcia6718

3 жыл бұрын

Use a wood stud finder lmao rookie ..

@Stickmantibet

3 жыл бұрын

@@joshgarcia6718 thank you

@rizocars6115

2 жыл бұрын

@@joshgarcia6718 🤣🤣🤣🤣

@whitey2275

2 жыл бұрын

He said thankyou still🤣🤣

I came to see the part where the vent pipe is installed through the roof, this video appears to vent into the attic.

@justauser

2 жыл бұрын

It vents out the wall or through the roof... Never should vent into an attic lol

Our hood is quite heavy. I’m concerned about hanging it with only screws (or even anchors) to the wall. The studs do not line up where needed. Any suggestions?

@rakerock1651

5 жыл бұрын

toggle bolts, they will hold the hood up

@daijoubu4529

4 жыл бұрын

The EZ toggles is the superior anchor, otherwise open the wall and add wood blocking..

i believe you mentioned 2 ft of straight duct before an elbow. The video shows hardly any straight duct. can you verify please

There were one black and one green. You said it wrong.

maybe isolate supply before starting job ? Wiring seemed to be bare from the beginning.....ffs

@FriedChorizo

3 жыл бұрын

Let’s see your video on how to install ffs

@leew8812

3 жыл бұрын

@@FriedChorizo why?

this wall is made of paper lmao

WTF the wall can be poked by screwdriver alone

@mariom8651

3 жыл бұрын

U must not live in America lol

I am robot man. Align ear hole to laptop speaker.

what's with the weird intonation at the end of every sentence?

This is not how to install a range hood, unless you like scratches all over it, you must leave the protection on until the end duh

Why are American houses built so badly? Literally the big bad wolf could huff and puff and blow an American house down.

@eddiejr3934

2 жыл бұрын

Yes it’s possible