The roof cap was done for this Stainless Steel Range Hood Installation - kzread.info/dash/bejne/aaCKt5mld5zAn6g.html

Not a word spoken, and yet the best vid on this subject I have seen.

@FixitAll

3 жыл бұрын

Thank you 😊

I like that technique you used where you added the hanger. I have been looking for a lot time to see if it’s needed. Thank you.

@FixitAll

Ай бұрын

Glad you like it!

Thanks for not spending half of the video trying to convince everyone to subscribe like 90% of the youtubers. Straight to the point - get'er done. Great video. Thanks. Will be doing this soon.

@FixitAll

3 жыл бұрын

Thank you! Good luck!

This is the type of videos I like 👍. No talking just get it ✅ DONE .

@FixitAll

3 жыл бұрын

Thank you !

Best tutorial! I have all the parts and I’m heading to the attic right now to finish my vent install 👍 Thank you!

@FixitAll

10 ай бұрын

Nice to hear it was helpful! 🤩

I have combed through KZread. This is by far the most easily explained method. Only thing I would have done different was insert the vent under one more row of asphalt. Perhaps, there was a reason why you did not. Thank you for the video. Well done

@FixitAll

3 жыл бұрын

Glad it helped!

Great video. Quick to the point. LOVE the no talking just action!! Thank you.

@FixitAll

4 жыл бұрын

Thanks for watching my channel !

Excellent work Sir. Very helpful, thanks for posting 👍👍👍

@FixitAll

4 жыл бұрын

Thank you.

That was boss! I’m so glad I know how it works!

@FixitAll

4 жыл бұрын

Thank you. In a couple days you can see on my channel another video with horizontal pipe installation.

Very nicely done, I will be taking up this challenge pretty soon.

@FixitAll

4 жыл бұрын

Thank you.

This is a great video and will help a lot! Thank You

I need to do this exact type of installation tommorrow. Was wondering about the best way to tie into shingles without tearing a bunch off. Thanks for posting.

@FixitAll

5 жыл бұрын

Glad it helps you.

Thank you! Its It's going to help with my next project.

@FixitAll

4 жыл бұрын

Glad it will helps for you!

Супер работа!

Perfect ! Most detailed video about kitchen exhaust fan installation .

@FixitAll

4 жыл бұрын

Glad it was helpful!

Love your work👍🏻

@FixitAll

3 жыл бұрын

Thank you so much 😀

Great job!

@FixitAll

3 жыл бұрын

Thanks for the visit

Практичность и цена порой определяющие критерии любой работы)) лайк за видео!

@joseantoniocisneros2865

4 жыл бұрын

Andrew Borisov muy bien todo pero la puesta del cuadro en el techo muy malo

Good Job 👏

@FixitAll

4 жыл бұрын

Thank you !

Thank you for explaining everything it will help me when I do it my self

@FixitAll

4 жыл бұрын

Glad it help you !

@NoCampiRush

4 жыл бұрын

I was being sarcastic

@FixitAll

4 жыл бұрын

@@NoCampiRush oh, you mean no talking? I didnt see what else explane, clear video, step by step.

@LobsterBobChef

4 жыл бұрын

Was the adhesive you used in the attic the same as the one on the roof? It looked white.

Thank you so much!!

Corrugated flex pipe is not recommended for range hood installations. It can collect grease and cause a fire. Check your local codes.

@FixitAll

5 жыл бұрын

Thank you for advice.

@FixitAll

5 жыл бұрын

Interested situation, the factory include plastic corrugated flex pipe in hood set - (Stainless Steel Range Hood Installation) kzread.info/dash/bejne/aaCKt5mld5zAn6g.html For what and why they give a fire dangerous wrong pipe?

@reikonr7173

5 жыл бұрын

Then what do you recomend for it ?

@captain_clutch4983

4 жыл бұрын

@@reikonr7173 hard pipe if it's in angles use as many elbows as you need

@hughwynn6193

3 жыл бұрын

@@FixitAll - I know it's an old comment, but I agreed with "eric peterson" 100%. I am a retired HVAC technician after 40 years working in different states in US.

lovely job

@FixitAll

2 жыл бұрын

Thank you! 😊

excellent video

@FixitAll

5 жыл бұрын

Thank you!

Great video

@FixitAll

4 жыл бұрын

Thanks!

Great video. The best technique for this topic.. Short and clear. Love it. Only comment. Exhaust pipes for range hoods need to be rigid duct. Also, I'm concern about condensation in the winter due to the lack of insulation. Inside the pipe will condensate a lot in the winter and might even leak inside the range hood.

@FixitAll

3 жыл бұрын

Our area not required insulated duct in attic, since not to cold winter time.

@emilyp143

2 жыл бұрын

So would you have wrapped it in insulation? I live in Texas, so I’m not sure if it’s even necessary. I’ll be attempting this today. Wish me luck!

Good job my amigo !!!!

@FixitAll

6 ай бұрын

Thank you 😊

For a better video on installing the vent cap watch "How to Vent a Bath Fan Through the Roof" on this old house channel. This is of course not a bath vent fan but the application of the cap is still the same. This installation is not ideal. Also we are required to only use hard smooth duct for the range vent... as grease can build up overtime on any time of flex vent and cause a fire or just general inefficiency of the range itself.

@min2oly

4 жыл бұрын

That was not a better "cap install" you're correct about the duct.

Concise no bloat bla bla bla. Clear demonstrations

good job bro,

@FixitAll

3 жыл бұрын

Thanks 😊

Спасибо за подробное видео. Все просто и понятно. Мой будущий проект. Один из...

@FixitAll

4 жыл бұрын

Пожалуйста, рад если пригодится. Спасибо что смотрите канал!

@usman2388

4 жыл бұрын

@@FixitAll В каком штате живёте?

@FixitAll

4 жыл бұрын

@@usman2388 WA, район Сиэтла

@usman2388

4 жыл бұрын

@@FixitAll далеко...я в Техасе...можно ли наладить связь вне рамок Ютуба?

@FixitAll

4 жыл бұрын

@@usman2388 да я в Facebook Vasiliy Ivanov c аватаркой гайки и в ней написано FIX IT ALL.

Hello may I ask what type of bit was used in the oscillating tool?

@FixitAll

5 жыл бұрын

The cheapest for wood.

Wow 😯 nice!!

@FixitAll

Жыл бұрын

Thank you 😊 💓

Hello Fix it All, Nice install. I have a dryer vent through the roof. It has galvanized pipe from the top to bottom. The inside boot has come loose from the ceiling. I'm guessing because of the weight. Did you use semi ridgid duct in this video?

@FixitAll

5 жыл бұрын

All time I use aluminum flex pipes.

@sixsentsoldiers

5 жыл бұрын

@@FixitAll - I've never worked on this type of stuff before, but I'm gonna go for it. The boot that holds the collar to the ceiling was screwed in from the inside. I think that is where my leak is coming from also.

this may be a dumb question, but would this work for exhausting a wood stove?? I just inherited an old wood kitchen cooking stove from my wife's great grandparents and want to set it up in my garage. just curious if this exhaust vent can handle that kind of heat. Thanks...great video!!

@FixitAll

5 жыл бұрын

For the wood stove you should use stainless steel stove pipe. That pipe double wall with fire proof insulation inside.

@joshwilson6305

5 жыл бұрын

Fix it All thank you!! Would this vent work with that?

@FixitAll

5 жыл бұрын

@@joshwilson6305 no, no, no. No vent for wood stove. Only pipe above the roof. Google - wood stove piping diagram.

just wondering did you concern about the cold weather make the condensation for the duct? should be insulation the duct. another concern to me is in heavy snow would the cap be covered by snow? should make the cap 1 or 2 feet higher than roof? thanks

@FixitAll

5 жыл бұрын

In my Seattle area no snow (a couple inches in a couple days a year no big deal). And also no need insulation on that duct.

@tomlau1637

5 жыл бұрын

@@FixitAll thanks man

I have a roof vent installed, the person who did it cut a 6.75 in square hole in the decking. What do you recommend the best way to attach the 6" vent tube to the square hole? What is do you call that metal strip you used at the end of your video to secure the tube?

@FixitAll

5 жыл бұрын

Perforated Metal Hanger Straps - www.homedepot.com/p/Perforated-Metal-Hanger-Straps-3-4HS/100396917

@FixitAll

5 жыл бұрын

Same square hole was in roof plywood at customers house when they ask me to install a new microway. The Home Depot have a square metal plate with 5" or 6" hole. Here is a video and you can see this plate: kzread.info/dash/bejne/p41-pNyuZd3XpM4.html

Are you allowed to drill through the flex pipe in the attic using that brace? I guess it's just one tiny screw

@FixitAll

2 жыл бұрын

I was used two screws, from left and right 4:16

Was used Milwaukee Oscillating Multi-Tool www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Cordless-Oscillating-Multi-Tool-Kit-with-2-1-5Ah-Batteries-Accessories-Charger-and-Tool-Bag-2426-22/203144388

best install job of a roof jack i've seen in a long time! A++

@FixitAll

5 жыл бұрын

Thank you!

Very nice tutorial. Will this work in Chicago where it snows? I'm just worried that snow will bury the vent holes. Thanks in advance for responding. I subd to see more or your vids.

@FixitAll

4 жыл бұрын

Hi. Not shure about your area. Check local code about it and look around neighborhood roofs witch type of cap they have installed.

@bondpit8750

4 жыл бұрын

I’m in Michigan. Where my vent is located on the roof is an area that gets drifting so the snow can get quite deep. All the exhaust vent covers I looked at locally from the usual big box store were too short and would get buried in the snow. I got my vent from Ventilation Maximum in Quebec Canada, I’m close to the border so I just drove over to Ontario and picked it up at a local hardware store. It works great. You can probably order online.

@FixitAll

4 жыл бұрын

@@bondpit8750 nice.

@bondpit8750

4 жыл бұрын

In a colder climate you’ll want to insulate your ducting to prevent warm moist air from condensing when it hits cold attic air and then dripping back down into your fan. 👍🏻

@FixitAll

4 жыл бұрын

@@bondpit8750 thank you!

NEVER caulk the bottom of vent only top , left, and right sides

@gronaldo7gb

Жыл бұрын

Why?

@cray1185

11 ай бұрын

If bottom is caulked, it prevents any water [from condensation or other source of moisture] from properly existing out the bottom of the vent collar. Water will dam up and find its way to sub-roof/attic.

Nice...

@FixitAll

Жыл бұрын

Thank you! Cheers!

Hi What did you use to drill throw the roof pleas

@FixitAll

5 жыл бұрын

Was used Milwaukee Oscillating Multi-Tool www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Cordless-Oscillating-Multi-Tool-Kit-with-2-1-5Ah-Batteries-Accessories-Charger-and-Tool-Bag-2426-22/203144388

I broke the flapper in mine cause over time grease will stick it shut then it will not vent properly

How much will charge a contractor for this job?

@FixitAll

4 жыл бұрын

Very depend on location. 2-3 hours of work. So check your local guys.

Bro that is so hack. Got the job done tho👍were you hungover or something? just talking from exp

@FixitAll

2 жыл бұрын

No problem at all.

what type of screws did you use to attach the strap to the duct ?

@FixitAll

2 жыл бұрын

Nothing specials. Any type of screws for wood or metal with flat head will work. I was used Self-Piercing Lath Screws just because I have it already in my car. www.homedepot.com/s/Self-Piercing%2520Lath%2520Screws?NCNI-5

@Carlos.USA88

2 жыл бұрын

@@FixitAll great thank you

What if it snows and it gets higher than the vent ?

@FixitAll

3 жыл бұрын

I don't know what to say. All houses in our Washington state has this vents caps.

Come on dude. Why the flexible vent? Who does that on a range hood? That's going to rattle like hell. Other than that looks like a good installation.

@FixitAll

3 жыл бұрын

Thank you!

Hey, Putting sealant on 3:20 on the bottom front part of the vent for condensation cause issues? I saw many videos where the bottom part is not glued to let it run down naturally. What are your thoughts? Glue the whole thing down or just the top/left/right sides to the roof?

@FixitAll

5 жыл бұрын

I have no idea.

@loufernandez2441

5 жыл бұрын

@@FixitAll so the way you did it causes no issues over time granted it rains alot where you are?

@FixitAll

5 жыл бұрын

@@loufernandez2441 that's why I seal around.

What happens if they install the cap above the shingles?

@FixitAll

2 жыл бұрын

If sealed around very well - nothing happened.

@ihsanabufarha1764

2 жыл бұрын

@@FixitAll Thank you, sure he did, I just wanted to double check

how do you call the punched thingy used to hold the duct ?

@FixitAll

2 жыл бұрын

28-Gauge Galvanized Pipe Hanger Strap www.homedepot.com/p/Oatey-3-4-in-x-25-ft-28-Gauge-Galvanized-Pipe-Hanger-Strap-33530/301505501?source=shoppingads&locale=en-US&&mtc=Shopping-VF-F_DYNM-G-D26P-026_001_PIPE_FITTING-OATEY-NA-NA-PLA_LIA-NA-NA-MK471123326_9016409793_FY21_2243&cm_mmc=Shopping-VF-F_DYNM-G-D26P-026_001_PIPE_FITTING-OATEY-NA-NA-PLA_LIA-NA-NA-MK471123326_9016409793_FY21_2243-71700000088658089-58700007494053431-92700067457295553&gclid=CjwKCAiAxJSPBhAoEiwAeO_fP1yKREX0y9kLzHH_Qzc4bVcBZo4-KHKhh51RWIZDGT-v5pCwQi6BfBoCBAkQAvD_BwE&gclsrc=aw.ds

@Carlos.USA88

2 жыл бұрын

@@FixitAll thank you !!!

i see this video was posted 2 years ago, have any updates? Any leaks? Condensation?

@FixitAll

4 жыл бұрын

No way to leaks. All perfect.

What kind of fan were you installing?

@FixitAll

6 жыл бұрын

Ernesto Rodriguez Will check modal today and let you know.

@tannerrobertson9988

5 жыл бұрын

Looks like a range vent

I like your videos , but Corrugated flex pipe is wrong here. as well you used wrong sealing

@FixitAll

3 жыл бұрын

Witch sealing you recommend?

@VIVAFPV

3 жыл бұрын

@@FixitAll BLACK JACK Silicone 50-Year Warranty

@FixitAll

3 жыл бұрын

@@VIVAFPV Thank you!

Thats not right, you are supposed to take the full shingle out above it and make the cut. That way you do not have the bow in the middle of the shingle when you slide the flapper vent in. Also, if installed correctly, you do not need to goop it like you did. Thats so much tar!

@FixitAll

4 жыл бұрын

No, i dont want to have a big deal with roof. All the time it work perfectly since 1998.

@csn583

3 жыл бұрын

@@FixitAll "Didn't feel like it" is where all half-assed work comes from. Sealant will fail before the hard parts do, which is why it should never be the first line of defense. Just because you've gotten away with it doesn't make it right or good. It is not that hard to remove and replace shingles properly.

@FixitAll

3 жыл бұрын

@@csn583 2 years already, 12 month rain... no single problem.

Why take the collar off, loosen your shingles higher up with a flat bar not bending them with your fingers😔 tar should be underneath the flashing, not all over on top to be seen, but it helps people who need help👍

@FixitAll

Жыл бұрын

Thank you.

Why did I like the music so much

2:32 what a weird way to cut a hole man

@FixitAll

3 жыл бұрын

Just a hole, nothing fancy, so any tools will work fine.

Should have used insulated ducting.

@FixitAll

5 жыл бұрын

Never saw insulated in houses.

@tannerrobertson9988

5 жыл бұрын

Range vent ducts dont really have condensation problems like bathroom vent fans do. Insulation is not needed.

@b0b0-

4 жыл бұрын

In cold weather climates.

Against code to use anything other than hard pipe taped and mastic.

@FixitAll

Жыл бұрын

Who cares, important - it works.

@mikesmith1353

Жыл бұрын

@@FixitAll Nice attitude. So does duct tape on a car tire until it doesn't and someone's dies. Bubble gum and spit wads work too. If you're going to make videos just call them the wrong way to do things. Or Jethroe's redneck videos. Or how to burn your house down.

@FixitAll

Жыл бұрын

@@mikesmith1353 depends on the location my friend. In my area hundreds, thousands houses builders done just like that. So, no one burn yet.

Wait... you conveniently used an oscillating tool to cut a hole, then you used a hatchet as a hammer? hmm...

No good

@FixitAll

2 жыл бұрын

4 years, owner has no complaint and very good conditions.

A nother totally screwed up video. No tar should be used on the bottom side so any water that does get in could excape. Attaching the flex to nothing but caulk or adhesive is wrong. And I could keep going but my suggestion is there's a video on THIS OLD HOUSE norm will show you the correct way.

@FixitAll

6 жыл бұрын

Terry Moline Silicone, metal strap and screws will hold this pipe forever.

@FixitAll

6 жыл бұрын

Terry Moline Never had any problem with this type of installation.

@BlahBlahManYeah

6 жыл бұрын

Недостаток решения в том что, если ветер оторвёт кусок шингла, или ещё какое повреждение которое на ряд или два выше отвода вентиляции, и вода проникнет под битумную подложку (tar paper) и будет стекать по OSB, далее по трубе отвода далее за стену, эта проблема очень не скоро обнаружится, ну и потом всё-таки парусность это устройства выше чем шингла и ветер в итоге раскачает клеевое крепление что приведёт к протеканию.

@FixitAll

6 жыл бұрын

BlahBlahMan Yeah За 22 года работы в Америке такого у меня еще не случалось.

@EDHBlvd

5 жыл бұрын

He didn’t put anything on the bottom. 3:45 shows it without caulking/tar.

Wrong again

@FixitAll

4 жыл бұрын

Wrong? Who cares if it work perfectly well 👌

The roofing work is horrible.

@FixitAll

3 жыл бұрын

Done perfect.

@metaltera86

3 жыл бұрын

Aesthetically yes But it looks overly sealed and will be fine

Ah I was so impress with the vent thing but very disappointed that you used flex duct no good!