Kioti CK3510SE - Water In Diesel Indicator | How to remove water from your fuel filter
Тәжірибелік нұсқаулар және стиль
More downtime while I was brush mowing our pasture. This time a new indicator illuminated on the dash. Turns out it was the indicator for water in the diesel. Luckily, it ended up being a quick fix and I was back mowing. I didn't know what this indicator meant prior, so hopefully this helps other like me.
Пікірлер: 8
Great video. Needing to change my fuel filter soon on my ck3510 and I was looking for a video showing the priming process to fill the filter. Thanks for sharing.
@blood_sweat_and_beers
Жыл бұрын
Glad you found it useful! I recently replaced the fuel filter after this video was recorded and the processes was basically the same. If you are replacing the factory installed fuel filter, it can be a pain to remove. Filling the new filter up with diesel before installing helps with the amount of manual pumping you need to do. Good luck!
@backyardcountrylivin1514
Жыл бұрын
@@blood_sweat_and_beers awesome, thank you.
Thank you. I just got this warning light today and also had never seen it and had to learn what it was. Perfect video for me to fix it. Saved me a lot of worry and time. Many thanks.
Hi Mate, that is the quick fix to drain the water from the filter, but that water came from your fuel tank and it is highly likely there is more water in there, it is probably advisable to empty out the fuel tank and flush with a litre of fresh diesel. Catch the flush in a white bucket and see if any water is present. Some fuel tanks have the feul outlet higher than the bottom of the tank and water being heavier than diesel it will always sit in the lowest point and be hard to remove.
Thank you. Got me back to work.
I can't get the clip loose. Is there a trick? Do you have to be strong? Female here without a lot of hand strength.
@blood_sweat_and_beers
11 ай бұрын
There is a clip on one connector that overlaps a piece of plastic on the other connector that keeps them from coming apart. If you pull this clip up so it can clear the plastic, they will slide apart. You need to pull this clip up and pull the connectors apart at the same time.