I appreciate you being patient and taking time to make this video I will be installing mine this weekend

@hawaiianbrokechanic

Жыл бұрын

Thanks for checking out the video! I hope your install went smoothly!

@istokpoga

Жыл бұрын

How did you like it?

@JonathanRomero-gs7tg

3 ай бұрын

Did you like it ?

For those who say “you can’t tell through a cellphone” he’s definitely right about the sound quality with headphones on. You can hear the difference with sub on and off. Awesome video! Super straightforward instructions and tips that make a true distinction between his set up and that of others. Great for a teen who doesn’t want to be the annoying kid on the block whose neighbors end up hating or for Mom and Dad who just want a little kick for when there’s no littles in the car.

@prest0_0

8 ай бұрын

i gotta sub hooked up to my computer lol can hear with that too

@hawaiianbrokechanic

7 ай бұрын

@@prest0_0 that’s awesome🤣

Your work was nice and neat, you explained every step throughly. Great work!

I like the houses in your neighborhood and how that sub demonstrates the boss.

One of the Best videos Ive seen on this project

My younger brother has this in his hatchback yaris, and it sounds great paired up with jbl 6.5 coaxial speakers.

Nice video well done! I just picked up one of these and havnt had time to install it yet and was wondering how this thing was gonna sound or be worth it and your demo of it was well explained and gave me a good idea where to add this to my system! Mahalo nui loa , I subscribed and look forward to seeing some more reviews and videos from from ya! A Hui Hou!!!

You’re a cool KZreadr buddie definitely liked your demonstration. Well done and we’ll explained! Like ya absolutely

I also using the same in my car !! And the bass quality is literally genuine !!

Nice video. I love when people try to demo the sound though you can't tell any difference over my phone or computer watching this but I'm sure it sounds good.

@hawaiianbrokechanic

Жыл бұрын

I know right! That why it’s better to listen to it on some good ear buds or good full range speaks larger than 6 inches🤣.

Great review and walk through

Great video, wish I could've seen this video before I installed mine.

ive been thinking about adding this to my bose system in my Maxima thanks for the review think iom going to get it

Very nice installation, thanks man, I just want some bass in my SUV, not a killer bass as I had it 25 years ago, exactly what I'm looking for, thanks for sharing the video.

I have this sub in my 2018 Peterbilt 389 dump truck and it is absolutely amazing. Picking one up for me extended cab silverado this afternoon

@ZeroStoryHub

6 ай бұрын

Did you mounted it yourself or did you get a shop to do it?

@TheRoadhammer379

2 күн бұрын

​@@ZeroStoryHubbro, it's not rocket science, why would you pay 500 dollars for an install... this video literally holds your hand through the install

Thanks for the review it was great I have a 18 challenger Ile be putting it in thankfully the battery is in the trunk it has the alpine package but I don't want the door speakers to work so hard

Going to consider installing this machine on my 06 Corolla

Yes it was surprising in a good way

I’m going to buy one right now 🎉🎉

@hawaiianbrokechanic

Жыл бұрын

Let me know how it turns out🤙🏼

Keep up the good work

Great video! Thanks for properly explaining all the controls that the subwoofer has to offer and installation instructions aswell🫡

Small but still turns head.. With the tunes I did the opposite of what I watch.. My gain and bass almost max and had no problem.. Factory stereo both sitting max

You made my installation so much easier thank you

@hawaiianbrokechanic

Жыл бұрын

Thank you! It’s comments like yours that keep me motivated to put out more content! Mahalo and keep brokechanic-ing 🤙🏼

One of our local Subie WRX guys has the PT250 sub/amp installed with his stock head unit, and I was pretty impressed with how it sounds.. Definitely a great buy for anyone looking to get a little extra low-end over what a stock head unit might give. Super easy install at that..

@brother_maleik

Жыл бұрын

Could he set it up so all the bass came from the sub? I have a 2020 STI and having the bass come through the speakers fucks up the rest of the song

@bronsondempsey7812

Жыл бұрын

@@brother_maleik I believe you can turn on the bass down on your head unit so that no bass is coming through door speakers and then turn up the bass to just the subwoofer with the bass knob included with the sub. I could be wrong

@brother_maleik

Жыл бұрын

@@bronsondempsey7812 makes sense, turn the whole bass down and turn it up extra on the sub. Not the perfect fix but it will work

@keithtabor3599

Жыл бұрын

I need help I have it all hooked up the blue light comes on but nothing else happens

Thank you.

just wounder what it sounds like with music like Hinder or BlackBerry Smoke

Well done braddah. 🎶🎶🎶🎶Mahalo for sharin🎶🎶🎶🎶🤙🏼🤙🏼🤙🏼

@hawaiianbrokechanic

Жыл бұрын

🤙🏼

What are the measurements of the box in this setup?

Yessah unko Jeff love you just bought dis one from Wally World braaaah! I watched your video so I can learn. Jah bless

Hey there, I’ve installed a pt250 in my truck, I didn’t connect to an rca cable I went straight to speaker wires. Whenever I turn on the truck it powers on but it won’t play when the bass comes. I switched the power to an 8 gauge wire. I also didn’t connect the power wire bc the speaker wires would pick up the signal and turn it on, any suggestions?

Hey so I connected everything. But for some reason now my door speakers sound less loud. Almost like the sub is taking away power from the door speakers? Which shouldn’t happen bc the sub has its own amp. Any suggestions? Also, I connected the remote wire to the cigarette lighter fuse so that works. I also tapped into both rear speakers with the other 4 wires. Is that correct? My setting are 12V and Lo input level. Still the door speakers are not loud. I used to not be able to max out my volume on the head unit. Now after sub install, I have to max it out in order for it to be somewhat loud.

if the input is comeing from your speakers wire make sure its on hi input on that switch. sounds cleaner

@hawaiianbrokechanic

10 ай бұрын

That’s exactly what the instructions tell you to do! Thanks for checking out the video!

This is kinda late but where did you put the remote wire

Great video!!! I just had mine installed, but get distortion depending on the genre of music. How much gain vs bass boost did you add with the notched knobs? How do I get your clean sounds?🙏🏻👍🏻

@hawaiianbrokechanic

10 ай бұрын

Because this is a single 10 inch sub, you will not get that low booming bass at high volumes. Here is what I did to get punchy bass with very little distortion: 1. Turn your gain on the sub all the way down and your bass knob all the way down as well. 2. Turn you head unit volume as high as it can go without distorting. 3. Turn your subwoofer frequency all the way to the right. (Up in frequency). 4. Turn your subwoofer gain up until it starts to distort then back off until it’s clear. 5. From there you can adjust your bass knob for addition bass. NOTE: If there is distortion, you will need to adjust your equalizer in your head unit. Back of the 20/30 HZ frequency. So…now you can play you music at a reasonable level and adjust the bass using your bass knob… Back off on the bass knob if it starts to bog. You will need to do this a few times until you dial it in…. Remember with this subwoofer, your bass will come from the mid frequencies…let me know how it goes and thanks for checking out the channel! Don’t forget to like & subscribe 🤙🏼

Hey I lost the 10 pin connector that goes I got he subwoofer and was wondering if you are able to tell me which wires are the ground, positive and the 12v. The wires on the new connector I got are different color

@hawaiianbrokechanic

2 жыл бұрын

If you follow the order of the 10 pin connector from Left to Right (Top Row Pin 1 would be top left and below pin 1 would be Pin 6). With that said, your Positive leads are Pin 5 and 10 (these to leads need to be joined together and connected to the positive lead to your battery. Pin 4 is your remote wire and Pin 9 is suppose to be empty. Pin 3 and 8 are your negative leads that also need to be connected together and grounded to bare metal. I hope this helps! Thanks for checking out the video and if you haven't already, please like and subscribe!

Hey brotha, great video. I appreciate how informative it is. Question. I just bought the same sub but I have a stock unit on my 2020 Nx300 so I’m thinking of connecting it the rear speakers. What do I do with the blue cable? Will the amp turn off on its own with I turn off the car? I’m a bit concerned. Thanks in advance 🙏

@hawaiianbrokechanic

4 ай бұрын

I’m guessing the blue you’re talking about would be your remote wire… You will need to connect that wire to the remote blue wire coming from your head unit or to an accessories like your cig lighter.

@MarkMiewords7

4 ай бұрын

@@hawaiianbrokechanic ok cool. Thanks but how exactly do you do that? Considering it’s just a wire, is there an adapter for that wire?

I have a 2022 gmc Sierra. All the installs I found online say to use Line out converter with the stock head unit. Would I still need that LOC with this unit?

@zmrq

Жыл бұрын

Yes

Just curious man, do you have to install a touch screen or new head unit to run this kit?

@hawaiianbrokechanic

Жыл бұрын

No you don’t need a new head unit. Usually factory radios don’t have RCA output jacks for an external amplifier, so you may need to tap into existing output wires from the head unit (example output wires from head unit to rear door or trunk speakers for a HI signal input to the amplifier…

🥳🥳

Great video. What speakers do you have connected to your head unit? I have the same one, and I want new ones. Sub is up next. Thanks

@hawaiianbrokechanic

5 ай бұрын

Dash board speakers are stock, but I will be upgrading soon! The door speakers are kicker 6 1/2’s. My head unit has a built in amp that only pushes about 25 watts rms per speaker. I will be adding an amp for the front and rear door speakers in the future🤙🏼

I got mine installed yesterday with someone that knows what to do but it sounds bad. I got the controller installed and everything and it starts sounding nice, but as soon as i play with the remote it stops sounding as good. I don't know if it's not getting enough power or if it's not properly equalized. But the bass sounds either super strong or doesn't sound at all. I have no idea what to do and it sucks cause I've heard good things about those bass.

@hawaiianbrokechanic

Жыл бұрын

There are a couple of reason why your experiencing those issues. First-the most common is that your head unit has a built in amp that pumps out wattage above 20 watts or above per channel. The built in amp on the subwoofer cannot process too much watts going in, therefore causing the speaker cutting out or resulting in too much bass. The fix is to use you RCA outputs from you head unit into the subwoofer box giving a low level signal into the amp. If you don’t have RCA Jacks in the back of your head unit then you will need a line level converter to lessen the signal. You then would tap in existing speaker outputs wires from your head unit. Second-improper wiring. Many cases it’s poor ground or wiring line level converter wrong. You will need to adjust your EQ TO LOWER BASS TO ZERO (on the head unit), set your bass knob for subwoofer to the lowest setting. Play your music then raise the volume before music distorts, back off the head unit volume, then adjust your bass knob for more low end. The level knob on the subwoofer box should be set to 9 o’clock you can adjust up to 12 o’clock (don’t max it out). The frequency knob should be sitting at 12 o’clock to start, the higher the frequency the better. These speakers will not give you the ball busting lows. You will get more of a punchy mid bass tone. What I’ve suggested is a good place to start. Keep me posted!

Will this help your cars rear speakers too?

@hawaiianbrokechanic

2 ай бұрын

No it doesn’t… it adds the overall sound by adding low end to your music.

Any help be appreciated, but i recently installed the same kicker setup. Bought the rca to wire splitter. Amp turns on but no bass. Everything is plugged in and wired up correctly but no sound. What can i do?

@hawaiianbrokechanic

10 ай бұрын

What kind of head unit do you have? Does your head unit have a built in amplifier? (Is it powered?). If your head unit has a built in amp to power speakers, the kicker amp will clip and cut off the signal hence no bass. Here are a couple of troubleshooting hints: 1. Go back to the video at 5:00 and review that you’ve got the switch’s set properly. 2. Turn all inputs on the kicker subwoofer to the minimum setting (input & bass). Turn frequency all the way to the right. 3. Turn down the bass frequency on your head unit all the way down (30/60 HZ frequency down). 4. Turn volume on head unit up between 10 and 15…. Slowly turn up input knob on kicker amp up until you get sound. You should get sound coming out of your kicker sub… Other things to check-is the LED light on the kicker amp blue when it’s turned on? If it’s Red, then it’s clipping…you will need to back off the bass and volume on your head unit…. Start with this first and let me know how it went…

I have a convertible mustang i plan to put this in the backseat but i want to add a decent amount of bass that will be plenty noticeable and if this will do good?

@hawaiianbrokechanic

Жыл бұрын

With the top down you will loose bottom end. Full transparency, the sub sounds better in an enclosed environment. You will get some low end, but it all depends on what crossover frequencies you tune to and your EQ settings…

@manuelsalazar-perry6490

Жыл бұрын

@@hawaiianbrokechanic thanks for the info i really appreciate it👍👍

For the blue remote wire that came with it, it’s too short… can I extend with 18 gauge wire or what kind of wire?

@hawaiianbrokechanic

Жыл бұрын

Yes! The remote wire does nothing more than provide a small current to turn on the amplifier. I hope this helps!

@randomdude6240

Жыл бұрын

@@hawaiianbrokechanic yes thanks! last question please for the striped black wires (grey and white with black stripes) on the sub did u connect these with the same grey and white black striped wires on the speaker line to rca adapter?

@hawaiianbrokechanic

Жыл бұрын

@@randomdude6240 so what’s important is speaker wires with a stripe (example: white with a black or gray stripe) signifies a negative current. So, as long as these are speaker connections, you will want to connect them to the wires that are also striped on the RCA adapter. This insures proper polarity. If you have an RCA adapter, refer to the instructions to make sure you’re making the proper connections!

Can I tap into the stock sub wires to get sound with this??

@hawaiianbrokechanic

Жыл бұрын

Yes you can, but you will need to tie in the female rca adapter to the subwoofer’s speaking inputs…

I juat purchased this amp and sub combo. Did not realize that i would need the rca to speaker wire adapter can i just tie into the correct colored wires behind the head unit ? Or do i need a adapter for the wires

@hawaiianbrokechanic

10 ай бұрын

You can go direct as you’re suggesting, just be sure to choose the High input settings on the amp. The instructions tell you how to wire it that way…. The only time you will need an RCA Jack is when your head unit has female RCA outputs for a clean signal. If you head unit has a built in amp more than 20 watts per channel, then you will experience the kicker amp clipping. If you’re not in a rush to install it, get The RCA adapters…

@jaywickham6090

10 ай бұрын

@@hawaiianbrokechanic I have rca cables already back under the seat ready for a regular amp and sub setup. Could I just cut the ends off the rca wires ? Or would you recommend waiting for an adapter?

@hawaiianbrokechanic

10 ай бұрын

@@jaywickham6090 if you have spare RCA jacks to use…then yeah, you can cut and splice.

How do you hook up the wire from the radio tho?

@hawaiianbrokechanic

7 ай бұрын

If you have a stock head unit, your only option is to tap in to the speaker outputs (wires going into your stock speakers). Be sure to set up amplifier settings to HI-input (follow instructions for this set up). If you have an aftermarket head unit with RCA outputs, you will need the rca adapters mentioned in this video to connect to the speakers amp. I hope this helps! Thanks for checking out the video and don’t forget to subscribe 🤙🏼

hey i have mine connected to everything and I'm not even getting power

@hawaiianbrokechanic

6 ай бұрын

I would check the blue remote wire connection. What you can do is connect the blue remote wire from speaker wire harness to the positive wire coming from your car battery. If the amp in the box turns on the amp, then it’s the blue remote connection. I would start there…. If that’s the issue, you will need to tap into the an ignition powered accessory like the lighter receptacle. If it’s not the issue, check your positive wire connection and ground. Bad ground is usually the culprit…l hope this helps!

Im picking one up tomorrow for $100. Hopefully it smacks in my car.

Ive tried to get it to turn on and it wont idk what i messed up

@hawaiianbrokechanic

Жыл бұрын

How do you have it hooked up from the head unit? RCA Jack to speaker or speaker output from head unit to speaker?

@freddy78bass

Жыл бұрын

@@hawaiianbrokechanic the way you did it

@freddy78bass

Жыл бұрын

But idk if i messed up a canle

@hawaiianbrokechanic

Жыл бұрын

@@freddy78bass okay…so if the amp isn’t turning on then there’s probably an issue with the remote wire connection. To test this, you can take the blue wire and touch it with your positive lead and the amp should turn on…just make sure all your gains are turned off…. If the amp turns on, then you can hook up the blue remote wire to an accessory like your cig lighter (+ wire) that turns on when you turn the ignition on. Make sure the switch’s on amp is set to 12V and Lo input… Let me know if this helps!

I can’t get the sub to turn blue. It stays red. Any ideas?

@hawaiianbrokechanic

Ай бұрын

Does the light stay red when the volume is all the way down? If so, you’ve got way too much watts going into the amp. Make sure all your gains are set to flat on the head unit EQ and the amplifier gain is set to the lowest setting… start by increasing volume on you head unit until it clips then back off a little. From there you can increase the gain on the amp…. Too much bass into the amp will also cause clipping and the amp will go into protection mode… I hope this helps!

@rileybattis8754

Ай бұрын

@@hawaiianbrokechanic yes that is helpful. Now my light is blue, but I’m not getting any sound and I tried multiple different ways to connect the speaker wires to the head unit.

@hawaiianbrokechanic

Ай бұрын

@@rileybattis8754 how do you have the speaker wires connected to the amplifier? Did you use a RCA adapter or spliced wires together? Make sure you got the amplifier switches turned on to the right settings.

@rileybattis8754

Ай бұрын

@@hawaiianbrokechanic I also have an aftermarket head unit that takes rca

How long are the wires?

@hawaiianbrokechanic

2 жыл бұрын

I used (12 gauge stranded) 16 ft of primary red and 16 ft of black ground/negative. You can buys spools of of wire from any automotive store or Walmart.

@rayben3972

2 жыл бұрын

@@hawaiianbrokechanic okay I was asking how long the wires are that came with the sub

@hawaiianbrokechanic

2 жыл бұрын

@@rayben3972 oh okay…so depending on what kind of vehicle you drive, the positive and negative wires are roughly 10 ft in length. You may need extra wire to lengthen the connection. I hope this helps!

@332ARA

Жыл бұрын

@@hawaiianbrokechanic So you used 12 gauge from the battery? I thought power to subs need to be thick

@hawaiianbrokechanic

Жыл бұрын

@@332ARA the wire harness that comes with the subwoofer comes with 14 gauge wires. 12 gauge is a tad bit larger. So I tried to master the diameter of the wires throughout the install. With that said, if you are installing a stand alone amplifier, the size of the primary wire will depend on how much watts you will be pushing. Here’s a link with more info: www.crutchfield.com/S-lYtq2Xy73Ss/learn/car-amplifier-installation-questions.html#6 I hope this helps!

The mic can't pick up the bass.

@hawaiianbrokechanic

2 жыл бұрын

Thats usually the case when you try to record it...it usually never comes out... You can make out the difference if you use good headphones earbuds. I guess you'll have to take my word for it that it does sound pretty good for a small sub box. Full transparency, if you're looking for loud and low thumping competition type bass, you're not going to get it out of this speaker. But if you are looking to add noticeable bottom end in your current stereo system, then this is a good solution. In the cab, you can definitely hear and feel the difference without advertising to would be thieves...lol

@hawaiianbrokechanic

2 жыл бұрын

@@unknownplayer6398 It all depends if your jeep has a hard/soft top. If your jeep just has a bimini top then NO, you will not feet it. You will hear the sound but not feel it. If you have a hard/soft then yes...the sound will resonate much better and you will feel it. I would suggest setting the crossover more towards 100hz for punchy bass. Like I said in my video, don't expect super loud booming bass. It will add a fuller sound with noticeable bottom to your current system. I hope this helps!

@hawaiianbrokechanic

2 жыл бұрын

@@unknownplayer6398 what matters is RMS. You will need to match the amplifier output to those speakers. Example: 10" speaker has a rating of 50 to 250 watts RMS (Rockford R2d2-10: Click this link to view specs: www.crutchfield.com/S-NXEaQao6hnE/p_575R2D210/Rockford-Fosgate-R2D2-10.html?XVINQ=DST&XVVER=2M7&awcr=386393273913&awdv=c&awkw=&awmt=&awnw=g&awug=9030017&gclid=CjwKCAjwp7eUBhBeEiwAZbHwkXiQ9bCQFRsSfpaVlyIh2Ppug11Ey9xY79i_2TpwjVNj8_FCF0-6ZhoCz6UQAvD_BwE. RMS is defined as: Root mean square or simply RMS watts refers to . RMS values are usually lower than peak watts ratings, but they represent what a unit is truly capable of handling. You will need an amplifier that has an output of 250 watts or greater to get the most out of the speaker. More watts RMS is much better then less. So if you are going to run two speakers, then you need to make sure your amp has double the watts in RMS. The 800 watts rating is more than likely a max watts that speaker can handle (unless it states 800 watts RMS). I hope this helps!

just put one in ..sh bumps

With a 7.5 amp no real power here.

Why not just wire tap?

@hawaiianbrokechanic

11 ай бұрын

Aloha! Can you be more specific about using a wire tap…. I can only guess you’re referring to tapping into speaker lines?

@dylanbushre2681

11 ай бұрын

Hello! Yes, I have 2021 silver, non-Bose and the speaker wires are white& blue/black in passenger. I wanna do 2 of these can I just split and either do a PAC high/low to the speaker wires or just straight into those wires?

@hawaiianbrokechanic

11 ай бұрын

@@dylanbushre2681 so you want to connect two PT250’s to just one wire source? It all depends on how many watts you Bose systems sends out. If your head unit has an internal amp that puts outs out 20 watts per channel, you will experience major clipping, distortion and bogging, that’s why you would use a PAC to reduce the signal. Technically you can go direct, but you will either loose signal so the subwoofer amp won’t turn on or you’ll get clipping….

@dylanbushre2681

11 ай бұрын

@@hawaiianbrokechanic so it’s Non-Bose, and no amp that I know of it’s a Custom with base audio and factory head unit

@dylanbushre2681

11 ай бұрын

@@hawaiianbrokechanic what I could do, is take one to the passenger side and the other to the driver side for the signal wires

Bro you can’t do that

@hawaiianbrokechanic

9 ай бұрын

Would you like to elaborate?

Is it the black headphone jack looking cable that plugs into the bass nob? & if I'm just splicing into my factory speakers do I have to run the blue remote wire?

@hawaiianbrokechanic

Жыл бұрын

The Bass knob does connect to the jack located on the amplifier panel. If you are splicing into your wires, you don’t need to connect blue remote wire. This set up is the High Level Input (taping in to existing wires). The amplifier will sense a signal coming from your head unit and turn on the amplifier. NOTE: Make sure you set the “Auto Turn On” switch to “DC” and “Input Level” to “HI”…. I hope this helps! That’s for checking out the video and don’t forget to Like & Subscribe 🤙🏼

Hey there, I’ve installed a pt250 in my truck, I didn’t connect to an rca cable I went straight to speaker wires. Whenever I turn on the truck it powers on but it won’t play when the bass comes. I switched the power to an 8 gauge wire. I also didn’t connect the power wire bc the speaker wires would pick up the signal and turn it on, any suggestions?

Hey there, I’ve installed a pt250 in my truck, I didn’t connect to an rca cable I went straight to speaker wires. Whenever I turn on the truck it powers on but it won’t play when the bass comes. I switched the power to an 8 gauge wire. I also didn’t connect the power wire bc the speaker wires would pick up the signal and turn it on, any suggestions?

@hawaiianbrokechanic

Жыл бұрын

Set switches to DC and HI input…(meaning you are not using your blue remote wire). The head unit output speaker wires are connected to the input wires to the amp. NOTE: the output wires from your head unit cannot be connect to any other speaker. I’m other words, if you have rear speakers and you tap into them, you need to disconnect the rear speakers so the amp can sense a signal… feel free to ask any other questions!

@hawaiianbrokechanic

Жыл бұрын

Another note: if your head unit has a built in amp (head unit puts out 20 watts or more) the sub will clip and go into protect mode. You will need to back off on the bass EQ on your head unit. The way to fix this is to purchase a line leveler to reduce the signal…

@MarkMiewords7

4 ай бұрын

@@hawaiianbrokechanic hey so I just read this reply which answers my initial question. However, now my next questions would be, 1. Do I need to tap into both rear speaker or can I just tap into one? 2. You said to disconnect the rear speakers one I tap into them?

@hawaiianbrokechanic

4 ай бұрын

@@MarkMiewords7 yes you connect to the wires that connect to your speakers. AND NO you can’t connect both speaker inputs coming from the powered sub to just one of the channels coming from your head unit. The sub speaker inputs need to be connected to its own channel (example-left speaker coming from head units needs to attach to sub amp left speaker input and right to right). I hope I didn’t confuse you🤣