Keihin CVK Carburetor Tear Down - Kawasaki KLR 250
Автокөліктер мен көлік құралдары
You are watching Part 1 of a 3 part series where I show the tear down, rebuild and installation of a Keihin CVK Carburetor on a Kawasaki KLR250 motorcycle.
Part 2:
• Keihin CVK Carburetor ...
Part 3:
• Keihin CVK Carburetor ...
Пікірлер: 46
Have the exact same issue when giving throttle on my 09 KLX250S (same carb). Have the carb off now and using your vids to help, thanks for documenting!
@SevenFortyOne
2 жыл бұрын
Good luck!
Awesome! Used the Kawi service manual and your vid and successfully have carb out and getting the green nasty out. Thanks mucho
A good fuel filter is a must on these old bikes, most gas tanks have plenty of rust and junk in them.
I have a 2003 KLR 250 as well and it has the same symptoms you describe. I haven't gotten around to fixing the issue (life events happen), but figured it was the carb. I'll have time this year to check out the problem. Thanks for the video!
'bout to do mine. Thanks for the refresher!
Cheers mate. Great vid & very helpful.
This video really helped, thanks!
Thank you very much. Perfect video . Explain . You helper to me very much. 🙏
I have a stripped jet it was the second one you took off in this video at 4:54 time slot
Saw you on Papa Texas channel and subbed.
@SevenFortyOne
6 жыл бұрын
Thanks Bud! I've subbed you as well...
@brianonthego
6 жыл бұрын
SevenFortyOne Thank you. Enjoy your how to videos. Have a great weekend. I am shooting this weekend and usually post my shooting videos.
thanks much!!! just picked up a 2004 klr 250 for $500, doesn't start. carb cleaning is my first task
@SevenFortyOne
2 жыл бұрын
Good luck!
@NipunDhanraj
2 жыл бұрын
@@SevenFortyOne success! but had to get a rebuild kit, the old parts were too corroded. Thank you!
Hola , podrias activar la opcion de traduccion gracias de antemano
Hi how does that sleeve go in ,. The one that is mid way in the carburetor
Im going to buy a ner carburator but i can't decide between PD30J AND CVK30,. CAN YOU HELP ME ?
I had a tiny washer fall out where does it go?
Would this be the same style of carburetor on a 93 mojave 250? I just bought a 4 wheeler and it was running great for a few hours, and then when I went to fire it up later on; it started real hard, throttle revving hi's and low's , I rode it a few minutes like that, and I haven't been able to get it going again since. I did make the mistake of putting crappy gas in it.. and now I'm trying to figure out how to drain the carburetor because I'm pretty sure it's been flooded. Any advice is much appreciated; thank you for this video tutorial. I know the carb on my 4 wheeler says CVK on it; I was just wondering if I could use this instructional video to help guide me with mine. Thanks again
@SevenFortyOne
6 жыл бұрын
I think this carb is very similar to the Mojave...not exactly the same but should be pretty close.
I recently bought a 1989 Kawasaki klr250, I pulled the carburetor apart to clean it which went find but the floats are out of whack. With the bowl on I couldn't blow any air through at all. I took it apart again and messed with the tab on the floats and finally got some air through when testing. I have worked on many carburetors but never this style. Where should the float level be on the floats? Any help would be appreciated. Thank you
@SevenFortyOne
3 жыл бұрын
Sorry - I don't know the answer. You might be able to download a shop manual on-line someplace that will have the info you need. Or, you might be able to check on a KLR-250 forum.
Great videos! Just to confirm, the clear hose (reddish) is the overflow hose? So it shouldn't be connected at the back end? I had fuel leaking out of it, but the way it flares at the end I thought it had become disconnected at the back end somewhere?
@SevenFortyOne
Жыл бұрын
Mine just hung down by the swing arm and drained on the ground
@rd8176
Жыл бұрын
@@SevenFortyOne great thanks! That helps a lot!
Good video well done and very informative. Was that carb off a Kawasaki 250 atv?
@SevenFortyOne
4 жыл бұрын
No, it's the factory carb that came on the bike when new
@JH-jd8ip
4 жыл бұрын
@@SevenFortyOne gotcha👍 I have the same carb but mines on a Kawasaki Mojave 250 atv. Thanks
I just got a 96 klr250 that's been sitting outside for 8 years and I'm going to try and restore it. any tips?
@SevenFortyOne
4 жыл бұрын
My carb was always a problem. Also check your airbbox for cracks - that will mess up your air/fuel mix and cause it not to run right. Check for loose nuts/bolts - forwhatever reason its find things loosen up over time. and check the fork seals. for leaks. Good Luck!
hahah my sidepanel foam is missing entirely !!
I get black smoke from exhaust.Why ? Stock carb, not sure what model it is.
@SevenFortyOne
4 жыл бұрын
Might be running rich. Clean 5he carb and check the valve adjustment
@oldgamermusic
4 жыл бұрын
@@SevenFortyOne Carb cleaned, Valves adjusted. Black smoke still there. Carb is stock with stock jets.
@Tizzypj
3 жыл бұрын
@@oldgamermusic exhaust valve or oil burning off some how piston rings maybe
That would have really made me mad to find that junk throughout!
@SevenFortyOne
6 жыл бұрын
I was surprised to see all that gunk in there. I'm told its from the ethanol they put in the fuel these days. I usually drain my carbs when I put my stuff up for the winter but must have missed this one...oh well. BTW, I got your package - thanks! Look for a video in the next day or two...
Is that the same carb for EN 450 (454 LTD)?
@SevenFortyOne
4 жыл бұрын
I doubt it...this is a 250
@Todiros
4 жыл бұрын
@@SevenFortyOne From what I've seen so far, it appears to be using two Keihin CVK34 carbs.
@SevenFortyOne
4 жыл бұрын
Ok, well maybe it's the same then. Sounds like you know more about it than me...
@Todiros
4 жыл бұрын
@@SevenFortyOne Hey man, I'm just guessing looking for confirmation. You look like you know what you are doing.
ethanol fuel ....destroying carbs across the globe
@SevenFortyOne
Жыл бұрын
Yup! 👍