This channel is probably the most compreshensive when it comes to the function and operation of carbs, ive watched many of the videos here and this guy pays such attention to detail and is very thorugh on making sure the job is done right, this is the guy I want wokring on my bikes

@How2Wrench

Жыл бұрын

Best comment of the day goes to you.... You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

I was always confounded over how carburetors work and could never figure out what the diaphragm did. After watching your videos, it all makes sense to me now. I have 2 carbs who's diaphragms melted into a gooey mess. Now I know what to do. Thanks!

Your videos really filled in some gaps in my carburetor knowledge. Great info that I can use to troubleshoot my Suzuki bandit 1200. Thanks!

I took a two year course on motorcycle repair when I was 15 (im 52) and have had motorcycles all my life and do all my own wrenching, cars and bikes. I had a great instructor like you who really new motorcycle and small engines. He new CV carbs in and out. I was unaware of the grooves at the bottom of the slide for the plastic spring retainer. I just cleaned and freshened up the carb on my 95 dyna but haven't put it back on the bike yet.now I have to go home and take the cap off to check it

@linofalzon5815

6 жыл бұрын

Cobra Ninety Six iweeks

Thank you for this and your other carburetor videos. It is this one that did the trick as I had not seated the diaphragm properly after a carb rebuild for a friend's Honda Shadow Spirit. Followed your video and she fired up and ran sweetly.

@How2Wrench

5 жыл бұрын

You're very welcome! Have you subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

Outstanding! I RE-reviewed this and actually found that I had screwed up in my carb assembling. Once again you have saved my ass and my wallet. Thank you kind sir.

@How2Wrench

3 жыл бұрын

That's what we love hearing! Give us a high five here! www.paypal.me/how2wrench We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

I love his teaching style

Very helpful. I have a Yamaha venture with one of the carburetor slides sticking. This will help me understand how to best treat this issue.

Went to school for marine and power sports in Minnesota I graduated last spring. There wasn’t any money in it here. But You are an excellent teacher

Very nice walk through. This was very helpful.

Nice. Knowledgeable I am also suffering for this issue after watching your video I correct and result awesome thanks a lot

Best and easiest to follow DIYs for motorcycles on KZread I have seen. Thanks a lot

Thanks, so much, for this!!! I was able to do a decent carb overhaul, on my Sportster.

@How2Wrench

7 жыл бұрын

Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html

thank you so much for your videos Shane you are a blessing.

@How2Wrench

7 жыл бұрын

I can help! Please use the contact form link below. You're in luck. I do offer personal service to back up what's missing from a video to fix your specific problem. Live Chat is great for you to actually show your specific issue! Become a member of my website. It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline! Sign up now to have my personal cell phone number on speed dial! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of our learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? Contact form: how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Donation link: www.paypal.me/how2wrench

Love it!! Thank you sharing your knowledge!!

@How2Wrench

5 жыл бұрын

Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzread.infoplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

Brilliant tutorial. Massive Thank you as I really needed this! Liked & Subscribed.

@How2Wrench

2 ай бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? ...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

I would like to thank you for sharing your priceless knowledge! I've been struggling and searching for weeks to fix several problems on my carburetor and after 3 videos you've been more efficient than several "specialists "... thank you so much! Greetings from Annecy 🇫🇷

@How2Wrench

9 ай бұрын

Cool. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Excellent work - as always!

@How2Wrench

5 жыл бұрын

Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzread.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

great tricks. great teacher

Good video. Helped me get carbs assembled after taking over a job that had needles assembled wrong side of plastic spring seat! Thank you.

@How2Wrench

3 жыл бұрын

Excellent! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

Great tip on checking operation of slide diaphragm before fitting 👍

@How2Wrench

3 жыл бұрын

Glad it was helpful! Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Says thanks here friend! Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

How have I only just found this? Awesome video.

@How2Wrench

6 жыл бұрын

Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZread: kzread.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

Awesome! This is about the same for my Honda ruckus 49cc

man you have some good videos

@How2Wrench

7 жыл бұрын

Thank you! Please share on your social media! Make sure to subscribe and click the notifications button for all future videos! Also, my playlists are broken down pretty well. The most popular one being: "Every Mechanic Should Know This" kzread.info/head/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK Feel free to make any suggestions or reach out to me for personal mentorship, Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist

After about 45 minutes of researching and playing with a diaphram, I stumbled on this. This is exactly what I needed, thank you!

@How2Wrench

7 жыл бұрын

Obviously Colton Great! Please share

The absolute best motorcycle channel by far!

@How2Wrench

Жыл бұрын

You're the best student...

I repaired my friends broken gy6 carb yesterday myself; without no carb experience. Same problem, loose diaphgram. And today i find your channel and i saw that video! what a coincidence! Many thanks for your teaching and videos. Regards from Turkey!

@How2Wrench

4 жыл бұрын

🙌 🏁 First off, thank you for SUBSCRIBING! Love seeing our subscribers comment on how the video helped! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Best teacher step buy step nice videos much help thanks

What a great teacher!

@How2Wrench

2 жыл бұрын

Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Thanks for the info on the diaphragm

@How2Wrench

11 ай бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Thank you sir!

Thank you sir, excellent video.

@How2Wrench

10 ай бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Very good and very helpful. thanks.

@How2Wrench

7 жыл бұрын

Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com How2wrench@gmail.com

@How2Wrench

7 жыл бұрын

Great news for you! I have solutions for you and will point you in the right direction. Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com

Thank you sir great video love it

@How2Wrench

6 жыл бұрын

Checkout the whole playlist for more! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? Your in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So I’ve narrowed down so subscribers and donations folks to assist beyond the over 660 free videos. My KZread has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

Thank you very much for video..

@How2Wrench

6 жыл бұрын

Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZread: kzread.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp Most Popular Playlist- Every Mechanic Should Know This: kzread.info/head/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK

Excellent video

@How2Wrench

4 жыл бұрын

👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Another Great Video... Thx so much,,,

@How2Wrench

2 жыл бұрын

Glad you enjoyed it. You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

God you explain this nice and thorougly! Thanks!

@How2Wrench

4 жыл бұрын

Thank you for taking the time to comment! Hit that subscribe button please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Thanks for the tip

@How2Wrench

4 жыл бұрын

Thank you. Here is a way to support all the free videos. Don’t forget to subscribe too! Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Shane great tip. Purchased a new slide for my CV carb and had a hard time seating the diaphragm. Read some tips about using spark plug grease; no go. Checked out this vid; first time seat....Thanks.

Many Thanks for this Video. i have Seen,what i need and what is wrong by me.👍

@How2Wrench

6 жыл бұрын

Thank you. Here are some ways to support me and other ways to follow me. I’m also available for hire to personally work one on one with you: Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Great job

@How2Wrench

Жыл бұрын

Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

I tried to email Mr Conely with a question it was rejected. Story of my life.

@How2Wrench

4 жыл бұрын

Just give us a call. It may have went to spam. Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

@nic_red02

3 жыл бұрын

This was so helpful cheers, even now. Lol if I need advice or just thoughts how do I go about it? Hopefully after doing everything mentioned in the videos the issue with my carburetor will go away.

Thank you !

@How2Wrench

Жыл бұрын

Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Very helpful info. Tyvm

@How2Wrench

3 жыл бұрын

You are so welcome! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

Great video

@How2Wrench

4 жыл бұрын

Glad you enjoyed it. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

fantastic, many thanks for your excellent video. Using the air gun test method showed I had one diaphragm fitted incorrectly

Very good

@How2Wrench

8 ай бұрын

Thanks. Glad it helped! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Thanks

Brilliant explanation of the float operation, Shane! I have a long trip planned for next year, and would like to ask you if my (Yamaha 250 cc 4 stroke single) motor can be improved in fuel economy terms by using carburettor/float adjustment? Cheers, Den. Wales

That carb looks like a carb I overhauled yesterday for Suzuki 125cc.

thank you very much... I had a case where one needle got stuck... it was solved without removing the carburetor

@How2Wrench

4 ай бұрын

Glad it helped. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

thanks m8!

@How2Wrench

2 жыл бұрын

👍 You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Thanks! I need to take off my CV carb again to make the slide sit perfect because I didnt hold it 'up' like you did and I had trouble making the slide fit. I have a feeling thats why the bike didnt want to rev above 8k. EDIT: I just reassembled the carb just like he did in this video and it revs normal again! 8K and above without ANY problems! THANKS

@How2Wrench

4 жыл бұрын

Awesome! 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Hi Shane , another fine video, I noticed that you applied a small amount of lube to the choke fitting on assembly, Is it wise or acceptable to add lube to the edges of the carb slide as well ?

I wish i would've taken atv repair instead of auto tech, I've found that I love working on motorcycles but hate working on cars lol. My dream is to have my own cycle shop to take old bikes and customize them

@How2Wrench

2 жыл бұрын

I sure have enjoyed my career....Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

Hey Shane! Thanks man, as an instructor at Lincoln tech here in Connecticut in the Welding Dept. I can appreciate your dictation and spirit in you craft. Your passionate, and very articulate. I need to clean and rebuild my carb on my 2000 Sporty 883. When i twist the throttle back, the engine is very slow to gain speed..sputters...then takes off.. It sat for a year..so a bike mechanic told me to rebuild the carb...is he right?

@lreyn2130

2 жыл бұрын

I know this is old, but maybe it will help others. My tw200 had the same issues. Sputtering under throttle, lots of white exhaust. Problem was that it was getting too much fuel due to a float bowl needing adjustment.

after work today. It's never to late to learn something new. What's your thought on using a little bit of silicone grease in the grove to hold the diaphragm in place?

do slide diaphragms stretch or shrink sometimes when I take one apart that appears to be the case and is hard to put back together

Out of curiosity. If you don't aligned the crown properly does anything adverse happen ? I've seen many videos of people just dropping in that crown that goes above the needle without check to see if it's aligned.

What service manual that for the carb? I have a CVK34 on my '85 KLR250 and am rebuilding the carb. Thanks!

Very Nice video, learned something, I have faced Pick up some days before and later diagnosed a small hole in Diaphragm rubber then Pick up resumes but from next morning my bike needs 20-30 mins engine ON for normal pick up. When I accelerate it losses race frequently . Do you have any idea on this.

@How2Wrench

6 жыл бұрын

Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZread has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

What can cause the slide to “flutter” I think yes a damaged diaphragm. But could jetting also affect the slide to “flutter”

Hey Shane, 6:10, yit cut out before you answered what was going on there with the one model, what is the reason?

Hi there my friend. Please do help me out with my doubt. I have a 28mm CV carburettor which is installed on my motorcycle. I have an issue like the bike starts choking when the throttle hits the higher side. When the rpm moves beyond 6k mark the bike starts jumping in rpm and it doesn't go above certain range. What would be the issue? I have tried changing the jets, float and cleaned it completely. No use. Can you suggest me any troubleshooting solutions from your experience? Thanks in advance. Cheers!!!

You should mention also how one can snip off 3 or 4 could off the top of that return diaphragm spring for faster throttle response. Also the little hole down in there, that it gets its air supply from can be drilled out to about 1/8" to increase takeoff power as well 😉.

@golgothadiver

3 жыл бұрын

I thought this had now been disproved and it was now seen as a bad thing to do?

@How2Wrench

2 жыл бұрын

Hi Kevin...this is really an "old" thought that has been proven to make most models run rich and loose power as compared to a dialed in dyno tuned kit. While it does work in some cases, it just can't be thought of as a blank statement for all...thanks for dropping in and subbing...Shane We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

Is there any way to repair a carburettor when the cylinder has marks on it and slide is also smotten on those side

cool.i got one this carb on my old harley,but bike won't start,i will try tomorrow clean check this thing

@How2Wrench

4 жыл бұрын

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

What's the T line on top of a VTwin cv carb? Is it over flow? I have gas pouring out and my bikes not running right? Could this be a shim or two missing from my slide needle (86 Honda shadowvt1100)

Do I like your videos? “YEP”

@How2Wrench

5 жыл бұрын

You're very welcome John! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Reach out to me on the contact link of my website below for my direct cell number if you ever need help. Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench

So I got a after market carb cover from Harley, there is no torque requirement then beside on the FXSTD model? I have a 2001 Sportster XL883 Hugger..

@How2Wrench

6 жыл бұрын

Hello friend! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZread and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

Question: I love working on old multi cylinder Japanese bikes. If one or two rubber cv boots are bad, should I replace all of then? The fear of the newer ones being stronger, pulling more air, fuel, etc? Thanks and love the channel!

@How2Wrench

Жыл бұрын

Hi Roger. Thank you for joining! Think of them as having a birthday and all things being equal is my preference BUT sometimes these are spendy and the customer just wants what is needed. I also think is depends on ultimate performance too. If you want the best chance of all the slides behaving the same, New is the way to go...but then again are all the rings and valves seals equal? Most likely the is some variance in different cylinders and only the most experienced rider or a dyno could tell.

do you think I did something wrong with the diaphram ran good for about 4 or 5 hours after carb rebuild then all the sudden the bike started falling on its face and popping backfiring real hard after quarter of a throttle it idles fine and but when u opem it up it just sounds lile a 2 stroke and has no power

my keihin ncv 24 carb problem is overflow of gas. my mechanic already clean and adjusted the float height and still i encounter the same problem. my vacuum operated fuel petcock is working perfectly. what seems to be the problem sir? thanks

So my CV carb has a plug with a small spring pushing down on the pin. I assume there are different designs?

@How2Wrench

4 жыл бұрын

Yes there are different designs. We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner. Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ (602) 345-0432 Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Have you hit that subscribe button yet? :)

nice, thanks.. now I need to buy myself a harley.. but first, where to get that money.. gee..

I like to apply a thin coat of oil to the carb slide, and to the rubber diaphram before putting back together. Any reason why you do not use oil on the slide & diaphram?

@bryanelliott2045

2 жыл бұрын

Mechanically sometimes parts are coated with a silicone or teflon and do not need a lubricant like wd40 . Actually coating the part with a lubricant is not good if it has a teflon coating. I use a dow corning high vacuum grease in the groove where the diaphragm seals to the body. It has a high temperature rating and I use it very sparingly. just enough to hold the seal in place. Also that vacuum grease is rated to be used on rubber. WD40 on the other hand is not good to put on rubber, it will deteriorate thr rubber.

So it's OK to use lubricants on choke plungers? Is white lithium grease I use on cables alright for this?

@How2Wrench

7 жыл бұрын

Yep....Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html

I think I just found the Holy Grail channel…

@How2Wrench

Жыл бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Can a vacuum grease such as Dow Corning High Vacuum grease be used in order to hold the slide diaphragm in place?

@How2Wrench

2 жыл бұрын

FYI...Shane is on the road this week training techs out of state.... Hey there awesome human (we hope so anyway 😁) Shane tries to devote one day a week for time to answer non-member quick questions from fans but the demand is insane 300-400 requests a week! Hang tight and maybe you get lucky he gets to circle back quick. High fives help too! Give him one here: www.paypal.me/how2wrench As I’m sure you can understand as a working person life has bills and we have to work first and play later. Due to the overwhelming inbox we are focused on fulfilling Techline and fan member requests. If you need immediate help you can get his cell directly with an order or questions answered daily for the member club of $1.99 We thinks that’s an amazing relationship for both and keeps the lights on. Social Media Manager Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

My sliders will only rise by about 1/2 inch. I think the bike might be restricted. It's off a Yamaha xj600. How do I remove the restrictions please?

Would using a can of air work instead of thru a compressor? I am 100% positive I have no pinch, tears, or creases in the piston, using the canned air doesnt move the slide at all. All new jets and gaskets have been installed.

What would cause slides to flutter - move up and down rapidly - at slight acceleration?

@How2Wrench

7 жыл бұрын

Please use the contact form link below. You're in luck. I do offer personal service to back up what's missing from a video to fix your specific problem. Live Chat is great for you to actually show your specific issue! Become a member of my website. It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline! Sign up now to have my personal cell phone number on speed dial! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of our learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? Contact form: how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Donation link: www.paypal.me/how2wrench

where can i get that plastic nut for the choke at? I may have stripped mine

@How2Wrench

7 жыл бұрын

umana121 Check your OEM parts fisch and if not there I may be able to find one used. Email me how2wrench@gmail.com If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

Sir, My scooter 115cc yamaha mio is sluggish.. the mechanic suggested to replace the carburetor because its needle is moving like this in the video.. Do you think its really the problem? My scooter is 2006 model and i still using it. i do experience back fires and its sluggish behavior during my ride. Please advice..

@How2Wrench

5 жыл бұрын

I can help! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZread has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

Cool vid! I have a carb from a kawasaki el250, and when I blow air into the carb and the needle is supposed to go up, it only goes up about half way. Is it supposed to go all the way up? Thanks man!

@How2Wrench

3 жыл бұрын

Sounds like you have a problem. Kawasaki's tend to have a harder time to set with the long spring. I have a solution. Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Says thanks here friend! Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@gertjanpostema6266

3 жыл бұрын

@@How2Wrench very nice! What do you think the solution is?

@How2Wrench

3 жыл бұрын

@@gertjanpostema6266 Yo! Want us to drop our wrenches and help you? We love helping subscribers… Help us grow friend! Here’s how: 1. Subscribe and let us know with a response. We will circle back when we can, it depends on member/customer demands and needs 2. We answer your questions EVERYDAY for channel members Join here: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin 3. Give us a high 5 here: www.paypal.me/how2wrench and I run back to the computer! 4. Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-service-60-minutes-one-on-one

I have problem with my carburator, how can i fix that? Like gas delayed

@How2Wrench

4 жыл бұрын

That surely is a question for Shane. Can you hit the subscribe button, it helps us and he often responds to subscribers when he gets to a computer. You rock! For faster service see below: We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner. Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ (602) 345-0432 Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly!

I done the similar procedure with my 650 Brute Force. Now I have starting issues. It will start but it's taking 20 -30 seconds for it to catch? any idea what problem would be?

@How2Wrench

3 жыл бұрын

Million possibilities without looking into to friend...we offer a techline service if needed. how2wrench.com/product/personal-tech-training-phone-facetime/ Or join the channel for member perks! -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

i cleaned out this part with carb cleaner then rinsed it down with water even the rubber. couldve that damaged it?

@How2Wrench

Жыл бұрын

As you can see from the slow response, it takes us forever to screen all these requests. 300-400 a week just in emails and 1000’s of comments! FYI members get answered daily first! Best $1.99 you’ll spend! 😁 That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench

Why we dont keep lubricant in it. ?

You just demonstrated why it is a bad idea to use pod filters on a CV carburetor. The CV carburetors rely on the stock intake boots and box to provide the proper air flow into the carburetor.

@How2Wrench

5 жыл бұрын

Thanks for commenting...good point for those not understanding why you need to "rejet". The doesn't care how it gets the air as its being "sucked" from the engine BUT to your point sometimes a tuner will just have a throttle position they can't "tune" and this is where that "tuned" intake length can come into play. MOST always it can be tuned but at what cost is the question. Most folks I feel don't understand the time it takes to really dial in a set-up. I always tried to steer my customers away from pod filters for the simple fact of "windy days". Strong cross drafts will affect outside cylinder (from the direction the wind is coming) making it leaner than the others. Can you tune them to run perfectly on a perfect day?....yes...do we often ride on unperfect days...yes BUT those pod filters sure look cool and make it easy to work on! :) Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzread.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

do these types of carbs still have floats?

@c4barry

7 жыл бұрын

Yes

Dude looks like Tim Hideker

@How2Wrench

2 жыл бұрын

Lol...we can see that... You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

🤘

@How2Wrench

2 жыл бұрын

You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@benderbender1233

2 жыл бұрын

@@How2Wrench sub is best eye can do! ✌

@How2Wrench

2 жыл бұрын

@@benderbender1233 No worries. It just doesn't tell us when some is much anymore. So we never know and Shane appreciates it.

@benderbender1233

2 жыл бұрын

@@How2Wrench ✌😎

But this video no resolved backfire into the sportster? When resolved backfire forever in carburator????

I have to ask just out of pure curiosity, how does the PB blaster not affect the seals and rubber parts in a negative way? I always thought part of Blasters advertisement was the fact that PB is quite acidic and can dissolve a foam cup etc... I have seen you use it on rubber parts in several videos, once even on a float needle. Anyone else had experience with this?

@How2Wrench

2 жыл бұрын

Hi Dan. That's a great question. I have zero negative experiences with the use of ANY brand of lube BUT I'm barely using any too. That's over 30 years and this video is six years old. With that being said I look over at my workbench and see WD40 sitting on the carb service station and seems to be "what I grab". I save the PB for stuck fasteners... I will do a test of soaking some stuff and mention this comment. I think a lot of people would enjoy the results. Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@Lulanda93

2 жыл бұрын

@@How2Wrench Outstanding, I would love to see how it turns out. Again only reason I question certain stuff like that is due to the constant stigmas we are told about over the years of evolving as mechanics, such as if you use grease on electrical connections that’s non Dielectric approved it can swell/crack damage rubber parts over time. I have never myself seen it happen but if it’s something if we can prevent we always try to be as preventative as we can. I would say silicone lubricant for carburetor o rings and gaskets but I’m sure some people would argue that too lol. I’m not a big fan of WD 40 personally I feel like it’s the type of product that’s ok for most situations but not great or ideal for any situation. I have always been told it has kerosene and other products in it too so I’m not sure what all that would do over long term also. Lastly let me say how much I am impressed by your videos over the years! I would beg to say you might be one of, if not the brightest motorcycle Technicians on planet earth! 😎 I know a lot of people don’t understand the time and skills it takes to produce these videos and the true value it brings to the table. We truly appreciate your time and when I can afford to do so I plan to become a part of the paid subscription videos. Thank you again and again Shane! Your videos have helped me tremendously throughout the years!

how do i find out the carb that i have, it says VE 14cete keihin japan

@How2Wrench

6 жыл бұрын

Hello friend! Still have questions? Coach Conley provides tech help and works one on one! His KZread and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

I have a Yamaha Virago 535 do I do my needle slides like that where they wiggle?

@firebird14420

2 жыл бұрын

Mine I have to direct into the emulsion tube or main jet nozzle

@How2Wrench

2 жыл бұрын

That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt

@How2Wrench

2 жыл бұрын

Sorry we haven't seen this question before and Shane would need to answer.

Looks easy when you edit out the fiddly bit LOL

@How2Wrench

3 жыл бұрын

Right???? Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

I wish I would have seen this video before I just paid $618 to have my 2000 Honda vt1100 cards rebuilt with 2 new diaphragms @ $120 a piece and i was bikeless for a month

@How2Wrench

7 жыл бұрын

Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html

@knowledgecorner4524

4 жыл бұрын

Where