Does this apply to the 360 because it didn’t work on mine. Thanks

any update after riding the bike

I have a problem with flashing 2wd 4wd on the screen every 4 seconds (both actuators in problem), took both out checked with 12 v voltage (tested potentiometers, speed sensor, switch 2wd 4wd, f / r sensor, checked every wire from connector to connector, fuses all correct), but still the same error, now I made a kebc delete as you described in the video, the flashing stopped, I change the switch from 2wd to 4wd only on the display, but the actuator for the 4x4 still does not work (am I wrong somewhere? I suspect the actuator controller , can i somehow test the controller before buying a new one?, because it is not very cheap, thanks

@danatv3046

2 жыл бұрын

Try the kebc motor on the 4x4 actuator plug. Its the same plug. Can see if its moving. Probably actuator.

4 pin relle work ?

Mine doesn’t have a fuse Box

Can you draw some diagram and published it please?

¿and color blue?

Runs great. Still have engine slowing you down. No issues

will this work for a 360 as well and can you send me a diagram for this thanks

@danatv3046

6 ай бұрын

I don't know. wiring is different on a 360

@coltonyork3803

5 күн бұрын

did you ever fix your?

So the kebab can keep the 4x4 from working. 4x4 stopped working when someone changed the belt I reset the belt but never made sure the belt sensor was in the right position. Belt light went out but 4x4 light was a 2 second on off blink. Mencken wasn’t correctly seated . So I put it back correctly 4x4 went to a half second blink. The switch the wires and the 4x4 actuator are all in good shape no corrosion burn marks mud. But the lights still on

@danatv3046

9 ай бұрын

electric model box under the seat can go bad or the actuator. actuator can work when putting 12 volt on the motor but doesn't mean its going to work on the bike

@cameronbell7052

9 ай бұрын

@@danatv3046 makes sense Do I have to put a relay in or can I jump it to the battery

@danatv3046

9 ай бұрын

i meant if you want to test the actuator motor

@cameronbell7052

9 ай бұрын

Oh ok I meant did I have to put in a relay to delete the kebc if so I’ll get one

@danatv3046

9 ай бұрын

i would try. kebc is useless anyway

good morning, can you help me how to do this removal of the la liz belt so that my four-wheeler responds

@danatv3046

11 ай бұрын

its in lip mode?

Does it matter if the relay is a flasher relay?

@danatv3046

Жыл бұрын

Not if its the same kind of relay

@andrebrooks7040

Жыл бұрын

@Dan atv Iappreciate your video. I was able to do it just as you did and 4x4 works great! I’ve bought the KNIGHT kit, as my quad is still in limp mode with belt flashing…wtfffff

@danatv3046

Жыл бұрын

Need to reset the belt light. Did you open the belt cover or unplug the wire while the key was on?

@andrebrooks7040

Жыл бұрын

@@danatv3046 I believe it was ran or tried when cover was off. I’ve since deleted the side cover belt light and just wired it in solid.

@danatv3046

Жыл бұрын

So its ok know?

Hello. Do you can send diagram to me. Thanks

@danatv3046

2 жыл бұрын

Wiring Diagram for the kebc?

@edgarsblums3900

2 жыл бұрын

@@danatv3046 yes

@edgarsblums3900

2 жыл бұрын

I rebild wiring and now it's ok.Thanks🥳

@neykovt

Жыл бұрын

Share with me please