One thing that sets this channel aside from the rest is when you do the rolling through the gears at the end. Gives a better idea of what it would be like driving 👍

Going to send this video to get my brother to do this in his fit!🤣 awesome video man!

Great video. Loved to see not so common hondas with k swaps.

Love that wheel and tire set up

That thing is gonna be a blast to drive.

Wow, that's a lot of power from a n/a engine, and making more power all the way to its red-line. It must be fun to drive!

The Fit is such a dope ride

I drive a subaru sti, basically stock aside from a fresh engine. It shocks me how fast these honda fit's are. 226 hp sounds insanely fast. I bet it would smoke my subie.

@jamartin005

Жыл бұрын

No doubt, n/a too. Pretty light lol

@kennedywrightt

Жыл бұрын

my accord v6 did my coworkers in stock

@enhancedphysique6452

9 ай бұрын

3 Bills in an Sti is like a stick 200hp SI. We been telling you Subie guys. Also, new engine? Let me guess head gasket before 15k miles😂😅😂😅😂😅😂

Nice exhaust sounds

dang, that motor sounds healthy!!

This things probably so much fun

I would love to do this swap, out here in cali you can still get K24A2 from the junkyard for $200-400

@2zztercel558

Жыл бұрын

Wtf i tought everything was overpriced over there

@bighomieJ5X

Жыл бұрын

@@2zztercel558 oh it is overpriced , but u can find some good deals every now and again

@jesselee4405

Жыл бұрын

Nawwwe seriously. I'm in cali

@prettirickii

Жыл бұрын

ill pay you to ship one for me 😂

@SloppyShotz

Жыл бұрын

No fucking shit

Great torque.

Stiffest chassis of almost any car on the road. Perfect car for this swap.

@Kennewickgeology

Жыл бұрын

Confirmed?

@HostmorkeCZ

Жыл бұрын

@@Kennewickgeology yes, there is a good video on the tube.

@Lxzandr

Жыл бұрын

​@@HostmorkeCZ Hey bro do you have a link to the video please?

Still have my Kseries built oneoff Turbo GD3 done back in 07.

@danielpelaez9978

Жыл бұрын

I’m looking to go k on my 07 how hard u think it would be Lol I been gathering research for like a year now

Awesome daily I bet!

I have a 2012 FIT. I love the wheels setup. Can anybody provide more details what parts to get to make all wheels disc with big brake. Thanks

i need to swap my fit now.... damnit

How great #s

Do you do Etune base maps? K24z3 / k24a4 block and piston type s oil pump turbo build

Brother I got a k24a out of an accord type s Jpn . Just got it. I own an 2011 civic si with a k20z3 . I want to slap it in but will it work ?? If so what do I have to change ! Nd lastly do I have to change it? What if I just wanted to slap the k24a as it is. & is the power ratio that different between these two motors.

Tell me you dynod bragas car without telling me you tuned bragas car 🎉🎉

Wow

💯👍

👍

Do you tune hondavert? You tune remotely for a local ahop here performance plus. I have a turbo k24a2. 60trim, 550ccs 300pump.hondavert k pro.

How does all this fun affect mpg

Do we have more info on the owner who build that fit with the K24 im looking for more info on the build Part list any specific mods ect would be nice to have a nice write up HSG and Brian from Vtec academy did some videos but those number look real good on a daily thanks !

What engine/trans mounts were used?

Makes me want a k24 on my GE8 Fit😅

@kfitfactry

Жыл бұрын

U know who to call

@baaablacksheep4003

Жыл бұрын

Who is he soppose tp call ?

K24a3 bottom end with K20a2 head is the best combination for Frank build.

@enhancedphysique6452

9 ай бұрын

K24A with K20A head (JDM) would be about 10-20 ho more. That's the grandmaster of Honda.

Nice video! Quick question Should I mod my k24z3 would it be worth it?

@georgep.692

Жыл бұрын

I have 3.5in intake, Skunk2 downpipe and tuned on flashpro in my TSX. Car makes good power and for a heavier chassis keeps up with a lot of things it shouldn’t, especially with a manual.

Is this the car from VTEC Academy?

how did he get the crank sensor to work what kind of timing cover did he use i know with my frank k24z7 i had to buy a 500$ special timing cover to make it so i dont have gaps and i could use the crank sensor for my rsx.

@Tixbomber

9 ай бұрын

The stock r40 timing cover will work just fine. (This CAN change, based off chassis choice and other factors). They are using a K24Z ecu from a TSX. You HAVE to (without going standalone/converting like you did), because they can read the new high resolution crank trigger wheel. Which is attached to the rear of the crank, read by the cps in the girdle. You don't need to convert to the traditional cps setup on the crank snout.

@OGKringles

9 ай бұрын

Oh i was just wondering because i thought he mightve been using a kpro. i run a k24z7 in my rsx and had to buy a custom timing cover to do that. @@Tixbomber

is it cheaper and easier to k swap a 2nd gen fit?

@kfitfactry

Жыл бұрын

Both same shit realistically but worth it as you can see

@zacragoonath

Жыл бұрын

The ge 2nd gen seems easier esoecially if youw ant to keep ac etc. Been followinf thr write up by vtec academy. Will be starting one soon

Hi Nick, which shop put this together in the GTA? Wanted to get in touch with the owner.

@kfitfactry

10 ай бұрын

I put this vehicle together

@zacragoonath

3 ай бұрын

@@kfitfactry Hey I didnt get the notification. Are you the owner or tech?

@kfitfactry

3 ай бұрын

@@zacragoonath used to own car and built this fit n many more

@zacragoonath

3 ай бұрын

@@kfitfactry do you have any contact info? sub'd to your channel as well.

1 exhaust port vs 4 exhaust ports? Huh?

Funny how 225 is too wide to “fit”

Could've went up to 8400 rpm safely. 7400 way too low.

As dumb as it sounds it has that this sounds way too powerful for this car even tho the power isn't insane as far as numbers ok the dyno that car is going to surprise a lot of people

Great video. Does he have a instagram?