Thank you to everyone for watching, commenting and giving my videos a thumbs up. Please like and share this video wherever you can it really helps to get my videos noticed. If you have any questions or ideas of what you want to share please leave a comment. Thank you to each and every one of you!

@christhomas969

4 жыл бұрын

I love the disclaimer in the description, and the handy links too, but "Don't be stupid" is classic.

@MoonpieCreations

4 жыл бұрын

Lol, Thanks Chris. You would think I wouldn't have to say that, but hey that's where we are today. Ken

Hi Ken, It's always good to see different peoples approach to finishing. That way you can take tips from lots of people and find out which works for you. Cheers, Huw

@MoonpieCreations

4 жыл бұрын

Yes, that's exactly how I can up with this finishing process. It's almost exactly like I do on plain wood. Took a lot of experimenting. Ken

I have watched a bunch of finishing videos... Yours is by far one of the best!!! Thank you for sharing!!!

@MoonpieCreations

4 жыл бұрын

Well thank you. I truly appreciate the kind words. Ken

Very helpful. I have not been very happy with my use of OB Shine Juice. I will be using your method on my next piece. Also really appreciated your comments on the differences between Yorkshire and Ack's grits. AND finally, the issue with paper towels effect on Mylands. Wow, so much in one video!

@MoonpieCreations

4 жыл бұрын

Thank you Tom. I've found the key to OB Shine Juice is letting it cure before handling it. Thanks for watching. Ken

Thanks. Exactly what I was looking for.

@MoonpieCreations

3 жыл бұрын

Awesome. I hope it helped.

Ken, great instructional video!! Thanks for showing all the details especially the lathe speeds.

@MoonpieCreations

4 жыл бұрын

Yes sir, any time. I'm just glad people enjoy the information and can use it. Ken

Looks great! The scratches that you circled were 60 grit scratches, which 120 grit cannot remove. Try 80 and 100 grit in between and you will get your shine without having to fill the scratches.

@MoonpieCreations

4 жыл бұрын

Thank you Michael, I try to go through all the grits starting with 60 then 80 and so on. Great advice for everyone. Ken

Absolutely a beautiful finish! Thanks for sharing with us!

@MoonpieCreations

4 жыл бұрын

Thanks for watching. Ken

Great to see how you get such a great finish. Thanks for sharing your knowledge.👍

@MoonpieCreations

4 жыл бұрын

No problem at all. Hope you enjoyed it. Ken

Thanks for this. That's a very fancy piece of wood you ended up with.

@MoonpieCreations

4 жыл бұрын

You are welcome and thank you for watching. Ken

This is going to be stunning, I love the pearl Finnish in the piece

@MoonpieCreations

4 жыл бұрын

The white against the brown of the wood really pops. Thank you Ken

Awesome video, simple and to the point. Thanks!

@MoonpieCreations

4 жыл бұрын

You are welcome and thanks for watching. Ken

Thanks for your tips on finishing good info.

@MoonpieCreations

4 жыл бұрын

Anytime Gary. Thanks for watching. Ken

Great, informative video, as usual!

@MoonpieCreations

4 жыл бұрын

Thank you. Ken

Great video, thanks for sharing the information!

@MoonpieCreations

3 жыл бұрын

Thanks for watching and commenting.

You did it!! Ty man 👍🏼

@MoonpieCreations

4 жыл бұрын

I told you I got you. lol Hope it helps. The key is to get rid of tear out. Get as smooth as possible to 240 grit then use sanding sealer to help get the last bit out. Boom nice finish. Ken

Thank you very much for the helpful tips. I like the shine juice, I have something very similar that I've been using on my regular wood projects but wasn't for sure if I could use it on my resin turned projects as well.

@MoonpieCreations

2 жыл бұрын

I'm a big fan of OB Shine Juice.

Great tip, thanks my friend.

@MoonpieCreations

2 жыл бұрын

No problem 👍

Solid information Ken. Thanks for sharing!

@MoonpieCreations

4 жыл бұрын

I'm thinking on pieces like this that CA finish you use for pens would work awesome. Ken

@CrossCutCreations

4 жыл бұрын

Moonpie Creations It would be worth a shot. That could be fun.

Great!thanks for sharing

@MoonpieCreations

3 жыл бұрын

No problem. Thanks for watching

Thank you for sharing

@MoonpieCreations

4 жыл бұрын

Thank you for watching. Ken

Awesome informational educational video experience Y'alls

@MoonpieCreations

4 жыл бұрын

Thanks Steven. We are glad you liked it. Ken

That’s beautiful MP..

@MoonpieCreations

4 жыл бұрын

Thank you. Ken

@PoohBah

4 жыл бұрын

Moonpie Creations your welcome

Nice!

@MoonpieCreations

3 жыл бұрын

Thanks!

great tips

@MoonpieCreations

4 жыл бұрын

I hope they can help. Ken

Thanks!

@MoonpieCreations

4 жыл бұрын

Thanks again for the awesome support Linda. Ken

Good info there ,good advertising, new sub ,greeting from Espana🇪🇸

@MoonpieCreations

4 жыл бұрын

Welcome, I am so happy you decided to sub. Hope you enjoy the stay. Ken

Thanks for sharing! Just what I was looking for. Can I put some sanding sealer on before the Yorkshire Grit?

@MoonpieCreations

10 ай бұрын

Yes! That is exactly what you should do. It helps to level out the sanding sealer.

Thanks

@MoonpieCreations

4 жыл бұрын

Thank you for watching. Ken

Great information! What did you spray on after the blackCA?

@MoonpieCreations

4 жыл бұрын

It was an accelerator to harden the CA glue. Ken

Hey mate just curious, what did you spray on the wood after applying CA glue?

@MoonpieCreations

4 жыл бұрын

That is Starbond Accelerator. It makes the CA glue dry faster. Ken

could u tell me please how long u wait for sanding after using sanding sealer?

@MoonpieCreations

4 жыл бұрын

After I burnish it I wait around 10 min to 15 mins. If I just apply and I wait 30 mins.

The black ca glue I found says it has a rubbery finish. Two questions; 1. By using the accelerator, does that make it hard like what I would call "normal" ca glue? And second, how do you clean those thin applicator tips or do you just buy a bunch of them?

@MoonpieCreations

4 жыл бұрын

I use Starbond CA glue, it finishes hard. All the Accelerator does is cause the CA glue to cure faster. If you have a CA glue that hardens to a rubbery finish I would look at changing. I toss those small applicators most times. Although you can turn the bottle up right and push air through them to try and get all the CA glue out. Haven't had much success doing this though. You get 5 or 6 with a new bottle of Starbond. Ken

You said you finish off with 6 coats of OBS. How much time do you allow between applications?

@MoonpieCreations

4 жыл бұрын

I do not wait between coats. I build them immediately after each other. Ken

What sealants and pasted would you recommend for food grade? Like what you just showed but for bar glasses?

@MoonpieCreations

4 жыл бұрын

David Graylord the tabletop resin by total boat works well for coating mugs or anything else. I would use something like on shine juice or just Yorkshire grit/Acks over it once done. But after the resin cures there should be no issues with absorption. Hope this helps. Ken

@davidgraylord5977

4 жыл бұрын

@@MoonpieCreations Thank you

Je n'arrive pas à trouver de Mylands cellulose sanding sealer en france mais je peux avoir du Chestnut cellulose sanding sealer. Le produit est il aussi bon ? Est ce qu'il vaut mieux du cellulosique ou de l'acrylique ? Merci pour votre vidéo

@MoonpieCreations

4 жыл бұрын

Mylands is just the brand. so as long as you use a cellulose sanding sealer you should be alright. Ken

Is this finishing method food safe? If not, what would be a similar method that is? Thanks for the videos!

@MoonpieCreations

4 жыл бұрын

I get people mad when I say this, but any finish is food safe once it cures. The only issue that could be an issue with OB Shine Juice would be the additives in the Boiled Linseed Oil. There are chemicals in it to help it cure faster. Shellac is used in many foods. Sooooooooo I would say yes it is food safe. This is my opinion and I know some people will disagree. Clear as mud? Ken

@dutenn

4 жыл бұрын

@@MoonpieCreations lol I gotcha. All cleared up

I missed the link to the OBshine Juice?

@MoonpieCreations

4 жыл бұрын

Sorry I had left the house while uploading and forgot to add the link. Here it is kzread.info/dash/bejne/pJZ-w8WcaK7Wndo.html Ken

Question: What type and where do you get the plastic that you use to wrap around a piece of wood in order to pour resin and then turn?

@MoonpieCreations

3 жыл бұрын

I am really not sure. I use mostly HDPE. But I think you may be able to find some material at a big box store or amazon.

what does that give ,,sanding sealer"?

@MoonpieCreations

4 жыл бұрын

The first coat of sanding sealer helps harden the grain fiber and helps to get a better sanding. The second coat of sanding sealer is used as a base for the OB Shine Juice. I hope this is what you were asking. Ken

@Roland265

4 жыл бұрын

@@MoonpieCreations yes, thanks

I've tried this but I always get streaks with the OB shine Juice. No streaks after the Acks. I'm getting the OB pretty warm when applying. Anyone else having issues with OB streaks?

@MoonpieCreations

3 жыл бұрын

Sometime I get streaks. I usually put on multiple coats. The streaks can be caused by many issues. Such as to much pressure or bad shellac. Or there might still be Acks paste (which is a wax) on the piece. Sometimes when my OB doesn't have enough denatured Alcohol in it it will streak too.

@homerlex

3 жыл бұрын

@@MoonpieCreations thanks, I'll keep experimenting.

I used this same technique but find that after a day or so, the resin portion of the piece looked awful, and had an oily film on it. The batch of shine juice is about a month old, made with denatured alcohol, blo, and shellac (with the wax). I’ve no idea what went wrong. Has this ever happened to you?

@MoonpieCreations

2 жыл бұрын

Hey Joseph, it has happened to me. I found that if I let the OB shine Juice sit after mixing to long it doesn’t work well. I make around 4 oz at a time and remake if the bottle sits more than a week. I had a few batches that would shine up and looked horrible. I found out shellac goes bad so I bought a new cam and my problem was gone. Oh also try and clean the project with denatured alcohol after the acks or what ever you use . It helps slot.

@wiebercraft4974

2 жыл бұрын

@@MoonpieCreations thanks! I’ll try making a new, smaller batch. I’m also pretty sure I forgot to clean the piece after using Dr. Kirk’s Micro Magic Polishing Wax (love this abrasive paste) before applying shine juice.

💯💖😎👍👍

@MoonpieCreations

4 жыл бұрын

Thanks OG Ken

You really need to watch an Eric Anderson video. It may help you become better. I did not see a very sharp reflection in your tuning, nice finish but not an oh, wow. finish.

@MoonpieCreations

4 жыл бұрын

Fair enough, but I can assure you it has a glass finish. Maybe it was the type of wood and resin combo, you have a hard time seeing it. I like Eric's channel a bunch, but every turner/woodworker has their own technique that works for them. This is just one that works well for me with Hybrid works. My finishing for wood projects is completely different. Thanks for watching and commenting. Ken