If anyone is wondering, this is also called "Tinner's Fluid": ZnCl2 flux = hydrochloric acid (ammonium chloride) and a few tiny pieces of zinc. Let the zinc dissolve until it stops bubbling. It dissolves passivating oxides, exposing the clean metal surface.

@donswank6920

4 ай бұрын

So, a carbon-zinc battery could be used. An alkaline, ni-mh or lithium wouldn't yield the same results, right?

@creationholic101

4 ай бұрын

Thank you! Cheers!

@ArminSchnur

4 ай бұрын

@@donswank6920 Zinc casing. Steel casing

@starfoxBR77

4 ай бұрын

I wonder if we can find it for sale

@DIYTechTrends

4 ай бұрын

I also tested it and it works great with pure HCL

Greetings from Wellington in New Zealand. Thank you for sharing your clever ideas and techniques.

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

From ... Cali, Colombia

specifically, it's HCL + zinc. HCL and the reaction fume is pretty poisonous, use safety gloves, mask, glasses, and do it outside

@creationholic101

4 ай бұрын

Hello! thanks for your comment. Wish you all the best!

This video was very informative and useful, thank you ❤

@creationholic101

4 ай бұрын

Thank you! Cheers!

Thank you for your educational and practical video. 🙏 from Iran

@creationholic101

3 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

Known in the U.K. as killed spirits, hydrochloric acid was known as spirit of salts years ago. Bakers fluid and most old time fluxes were made from it. Still the best, but wouldn’t recommend using on water systems, or electrical jobs because of corrosion.

@firstname2853

4 ай бұрын

So basically it's flux but if you run out this could be a back up dose the flux help the soldered bit stick.?

@creationholic101

4 ай бұрын

Hello! thanks for your comment. Wish you all the best!

Interesting, I will have to try this. Thanks, Yorba Linda, California, USA

@creationholic101

2 ай бұрын

Glad you like them!

Super Ideas, a big compliment also for the professional making of the videos! Greatings from Germany Blackforest

@creationholic101

4 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

If I hadn't seen it with my own eyes I would never have believed it. 🤠, this is just yet another reason why I have subscribed to this Channel. 👍👍👍👍👍

@creationholic101

4 ай бұрын

Thanks for subbing

Great! Greetings from Brazil!!!

@creationholic101

4 ай бұрын

Hey, thanks!

great videos. very helpful

@creationholic101

4 ай бұрын

Glad you think so!

Thank you Bro fantastic Great greetings from Switzerland

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

👏 saludos desde México.

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Gostei da idéia

@creationholic101

4 ай бұрын

Thank you! Cheers!

I appreciate the info. I dont always have borax handy so I'll give this a try. Thanks

@creationholic101

4 ай бұрын

Glad you like them!

🤩MOTIVANT ( génial ). Avec une entité d'exeption.

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

@fluxelectron508

4 ай бұрын

@@creationholic101 yes, so it now open mind and very nice for all.Good luck 🤞

Gratidão estou em ilha de Floripa santa Catarina brasil

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Muy buen video

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Great 👍

@creationholic101

4 ай бұрын

Thank you 👍

Very good 👍 from , Portugal

@creationholic101

4 ай бұрын

Thank you very much!

El cloruro de Zink (qure es lo que preparaste), es un muy buen fundente porque ayuda aparete a disolver los oxidos que dificultan las soldaduras, pero todas las soldaduras que mostraste estan " frias", y eso es muy malo, nececitas proporcionarles mas calor para que te queden muy bien, suerte.

@creationholic101

4 ай бұрын

Hello! thanks for your comment. Wish you all the best!

You a good men

I used HCL hydrochloric acid solution to dissolve the zinc, it dissolved in 1 minute and bonded the solder very well. ❤🎉

@creationholic101

4 ай бұрын

Hello! thanks for your recommendation. Wish you all the best!

Amazing ❤❤❤

@creationholic101

4 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Very good..Excellent 😊

@creationholic101

4 ай бұрын

Thank you! Cheers!

Very good information

@creationholic101

4 ай бұрын

Glad you like them!

Un saludo desde España❤

@creationholic101

3 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

from buenos aires,Agentina,south america

@creationholic101

20 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

नागपुर महाराष्ट्र से आपको बहुत बहुत🙏 धन्यवाद

@creationholic101

3 ай бұрын

Thank you! Cheers!

video bổ ích quá bạn

@creationholic101

4 ай бұрын

Thank you! Cheers!

Bonjour de la Région du Tarn, France. Un Grand 😊MERCI pour ton super vidéo, il me tarde de le tester.

@creationholic101

3 ай бұрын

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

its cool! thank you!

@creationholic101

3 ай бұрын

Glad you like them!

Very nice! follow you from Azerbaijan

@creationholic101

Ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

São Paulo - Brasil

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Que des bonnes idées !!! Merci beaucoup 🙏🇫🇷

@creationholic101

4 ай бұрын

Thank you! Cheers!

@majestelehogon223

3 ай бұрын

Ces quoi le produit liquide svp

Ben Almanya'dan çok güzel bir fikir teşekkür ederim beğendim

@creationholic101

3 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Bonsoir bravo

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

Desde Colombia

@creationholic101

Ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

طريقة رائعة سوف اقوم بتجربتها

@creationholic101

3 ай бұрын

Glad you like them!

I 'm türkiye.

🌹☺️🙂👍🏻 sweden here😊.

@creationholic101

3 ай бұрын

Thank you! Cheers!

Rio de Janeiro - Brasil.

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Teşekkürler Türkiye

@creationholic101

4 ай бұрын

Glad you like them!

Muy ingenioso. Cual es el principio?

@creationholic101

4 ай бұрын

Thank you! Cheers!

Show!!

@creationholic101

4 ай бұрын

Yeah!!

Bravo, ovo je super

@creationholic101

4 ай бұрын

Thank you! Cheers!

عالی بودخیلی هم مفید واقعا بهش احتیاج داشتم ممنون دوست گرامی

@creationholic101

3 ай бұрын

Thank you! Cheers!

Que idea tan buena está, una vez quise soldar un cable sobre una batería, y no pude, y la solución está en este documental. Mucha gracias. Saludos desde Caracas Venezuela

@creationholic101

4 ай бұрын

Glad you like them!

I am amazed you actually lit a led light with a battery, Wow amazing what will people come up with next.

@creationholic101

3 ай бұрын

Glad you like them!

แบ่งปันประสบการณ์😮😮😮

@creationholic101

4 ай бұрын

Glad you like them!

سلام بزرگوار گرامی ❤ از ایران تهران افتخار میکنیم از اشنایی با شما اوستاد سر‌ور والا از تجربیاتون نهایت استباده را میبریم با آرزوی موفقیت روز افژون شما راخواهانیم ❤❤❤

@creationholic101

4 ай бұрын

Thank you! Cheers!

Muchas gracias, por enseñar. Soy de Madrid, España

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

و فوقالعادیی ِvery nice

@creationholic101

4 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

What I don't understand is why did they solder the red wire on the negative end of the battery & the black on the positive end (I realize the actual connection is irrelavent to the project)... But still!

Hermano usa un mejor cautin, para esos trabajos lo mejor es el de 40 Vatios. Saludos desde Venezuela.

@creationholic101

2 ай бұрын

Hello! thanks for your comment. Wish you all the best!

Is that good for high heat temperature as well?

Support

@creationholic101

4 ай бұрын

Thank you! Cheers!

Soy de Guadalajara Jalisco México 😅🇲🇽

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@ficus663

4 ай бұрын

@@creationholic101 😅😅😅😅🖐️😁👍

That was a lot of work....for to use a power source (the battery) that will eventually be used up, and the whole apparatus will have to go to the trash.....Nonetheless, it was a good science lesson.

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

@javiermorales2020

4 ай бұрын

Ya no consumas más fentanilo 😢😢😢😢😢😢

@ArturSaldanha

4 ай бұрын

Must use gloves to protect skin

From egypt

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

👍👏

@creationholic101

4 ай бұрын

Thank you! Cheers!

It's called etching, but what they don't tell you is that it is perm destructive solution as the action will continue to corrode underneath the welds

واقعا عالی عالی عالی

@creationholic101

4 ай бұрын

Glad you like them!

دمت گرم براوو خیلی جالب و اموزنده بهمن از ایران

@creationholic101

Ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Holy Moly what a nice VIDEO

@creationholic101

4 ай бұрын

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

❤ 😘😍

@creationholic101

10 күн бұрын

Thank you! Cheers!

Portugal

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

could you please tell me how many volts the device in your hand works?

@creationholic101

Ай бұрын

60W

@turalzulfuqarov8786

Ай бұрын

@@creationholic101 thanks

هل استطيع استخدام حمض الهيدروكلوريك المركز على قطع الزنك وإلى متى أستطيع الاحتفاظ بالسائل

@creationholic101

4 ай бұрын

okay !

شمابسیاربادقت ‌کارتان راانجام میدهید🎉🎉🎉این عالیه

@creationholic101

2 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Exelente pongo en práctica👍🇺🇾🧉

@creationholic101

4 ай бұрын

Thank you! Cheers!

Cuanto tiempo puede almacenarse o cual es su fecha de caducidad de tenerla Saludos desde Colombia 🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴

@creationholic101

4 ай бұрын

You close it tightly and preserve it for quite a long time

👌👌👏👏 Where are you from man?

@creationholic101

4 ай бұрын

I come from Vietnam

@anantparkash

4 ай бұрын

If you are from Vietnam but you have United States country selected in your KZread channel settings. Please tell me the reason and also that selecting another country doesn't cause any problem in channel monetization or monetized channel doesn't demonetize. Kindly take out some of your valuable time and let me know about it in detail. I am your dear subscriber, please make sure to reply this comment❤❤

So ordinary soldering flux is made from Hcl and Zinc metal pieces ? ---interesting --(Africa )

@creationholic101

Ай бұрын

Thank you for watching

Rất hay. Nhưng nó sẽ bị rỉ sét chỗ hàn. Có cách nào khắc phục không.😢

@creationholic101

4 ай бұрын

you can paint it

Olsztyn Poland 😮

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Nifty and cool but isn’t it easier to get the zinc from something else?

@creationholic101

4 ай бұрын

I want to take advantage of the things around me

عالی👍🌹🙏🇮🇷

@creationholic101

4 ай бұрын

Thank you! Cheers!

London

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Buenas tardes, otra forma de conseguir fundente para este tipo de soldaduras es usar lejía directamente .Se aplica unas gotas de lejía con un pequeño bastón o pincel sobre la superficie a soldar. USAR SIEMPRE GUANTES Y MASCARILLA. Yo no recomiendo usar estos métodos para soldar conexiones a una pila o batería, se puede producir un cortocircuito .

@creationholic101

4 ай бұрын

Thanks for sharing!

Dall’Italia

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Isso é bem antigo, eu sabia da pilha mas o outro componente não !!!

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

Where are your protective gloves? And disclaimers about the dangers of disassembling batteries or mixing various chemicals? The title & thumbnail encourage viewers to "just put a battery on a soldering iron", giving the appearance that you care more about generating clicks/views/money than ensuring the safety of the communities where you publish content. You responded elsewhere that "the goal of this video was to showcase a unique approach to recycling"...yet that goal is largely incongruent with how you presented this content & is easily missed by the average viewer. I do hope this was an isolated, unintentional oversight on your channel.

@creationholic101

4 ай бұрын

Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

@user-mk8mn9dy3b

3 ай бұрын

no warnings...... no labels.... just let natural selection take over

來自台灣粉絲的問候❤

@creationholic101

3 ай бұрын

Hello! I am very happy to read your comment. Have a good day!

@lww3988

3 ай бұрын

@@creationholic101 謝謝您

ما هذه الماده وشكرا لك

@creationholic101

4 ай бұрын

Dynamite Patrick Patrikios

Pregunta: El ácido clorídrico a que concentración. ¿Me vale el SALFUMAN?

@creationholic101

2 ай бұрын

you can use pure acid or greater than 22%

Que disolvente usa para derretir eso

@creationholic101

4 ай бұрын

HCL

Much easier to buy ready made.

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

What an extraordinary content idea, bro, I'm interested in making it, nice to meet you, bro

@creationholic101

3 ай бұрын

Glad you like them!

Soy ESPAÑOL

Holand

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Italia

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

Put on protective gear???!!!

Chez moi ( à Portugal ) on avez l'habitude de faire nos même nôtres plaques de PCB. Il suffisait de les dessiner avec un marqueur et les plonger dans une solution de 2 produits que j'arrive plus à trouver. Vous n'avez pas un méthode simple pour le faire chez soi même SVP d'avance et bonne continuation.

@creationholic101

3 ай бұрын

Thanks for sharing!

請問有大約的比例嗎？

@creationholic101

2 ай бұрын

1/2

@alexwang1223

2 ай бұрын

感謝您的回覆 @@creationholic101

Rất thuyết phục , bạn có thể like cmt của tôi được chứ 5:51

@creationholic101

4 ай бұрын

Hello! I am very happy to read your comment. Have a good day!

@meovat5s

4 ай бұрын

@@creationholic101 ❤️❤️❤️ cảm ơn

Pls what the liquid that was poured into the glass ,

@creationholic101

Ай бұрын

" HCl " ❗Please enable subtitles in your language 🙋🏼‍♀ Thanks for watching 😋🤗😘

what is the water poured into the jar?

@creationholic101

Ай бұрын

HCL

Паяльная кислота

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best