Good review. Also like the way you end fast. Seen a few youtubers who drag out the end of the vids with closing music or other nonsense. and then wonder why they get dinged because people don't watch to the very end.

Thanks for the review... You're the best!

Not a bad looking bow and plenty fast enough for any realistic hunting situation.

I've got a jungxing compound hung up in the garage ! Got the same overlap on the limb graphics Good to about 60 yards derailed at the range once restrung it wiv 2 blokes and a large bar 'tidy' ! Move your peep sight no problem. Good for teenagers if you guys in Australia got vermin, it's the bow to leave buy the back door or in the truck ready! Pretty bomb proof. that new one looks pretty cool . A jungxing is like a Ford or Peugeot greater than the sum of its parts. But it ain't no P.S.E

I bought this bow. It advertised 30 ATA, It is 31. But I have a very short draw length, I have it turned down to 66lbs, I get full 70lbs when turned all the way in.

I love your reviews Steven. You inspired me to get into archery and I've learned so much watching your reviews.But have you ever really slagged off anything in a video review? I'd love to watch that. As an aside, to all you guys having a pop at Chinese products, take care because a lot of the equipment on sale in USA that on the face of it is made in US is actually manufactured in the far East. Or at the very least many of the constituent parts. And finally, I appreciate the benefits of a lifetime warranty but starting out there's not many US made bows that I could afford. A Chinese bow for pocket change helped me to decide if this was a hobby for me. And ultimately, once in, you're hooked, and then the next bow, or the one after that, could be a US made bow.

Would you still recommend this bow till this day at this price point or do you recommend other bows over it? Just subscribed, quality content!

Thx a good honest review as usual I like the look but the wife is getting a bit funny about me obsession but I keep telling her loads of people have more than five bows : )

@lloydwellington5271

4 жыл бұрын

You have to draw the line somewhere, "Just one more", is the perfect amount.

@lordcarnorjax8599

4 жыл бұрын

The right amount of bows is n+1

Very informative as usual! Given the difference between this and the Phoenix which would be your recommendation for target use?

@radzifagip

3 жыл бұрын

The phoenix its a hunter, and 128 its a target?

That riser reminds me of the Junxing Phoenix bow.

pretty keen to buy one. but do the binary cams have a big lean at full draw like an early bowtech?

I can understand about the M106 issue. The modules on mine didn't align on the 1/2" draw. This bow looks good though.

its like a medium quality bow but in a entry level price so ,if you want to shoot and practice its just greatzto understand all the archery .

Can you do a review on the Topoint TS350 compound ??

Thank you for your factual review on the M128. The first Junxing compound bow I own was the M120. The fibre glass limb broke after a number of shots. Anyway, the agent replaced me with another one. Though the finishing isnt 100% satisfying , I must say the price is attractive. The quality and features of Junxing bows has now improved alot and the prices are affordable. Can you do a review on the M109e please. Thank you once more.

@georgewashington1621

Жыл бұрын

Hello, can you tell more about how your limbs broke? I have a Junxing M125 and recently i noticed some kind of "splinters" on the inside of the limbs at the point of back supports of the limbs. I dont know if i should disassemble the bow and ditch these limbs or if its ok to keep shooting. I dont think i will be able to get new limbs here where i live so for me it's a question whether to throw away the bow or not.

@baz3184

10 ай бұрын

​@georgewashington1621 splinters a bad bad news. It might pop tomorrow it might pop in a year its probably already popped. What bow are you going for next? The gorilla is a good starting point

A lot of Americans who are lecturing about how bad are Chinese products. Let me tell you, there are many bows you can find in Lancaster which are actually Chinese made and being sold with different name. There are a lot of rebranded products from China. They make all kinds of things, from high to low end.

What is your at home target frame made from? Capet underlay? but what backing is in there?

Topoint t1 vs junxing m128. Which one that you recomended sir? For speed and acuracy

I don't think I've seen any goods in Australia that have anything less than a 12 month warranty. What Junxing quote might be a voluntary warranty, and any returns between that period and 12 months, you might be required by law to honour under reasonable usage conditions. Steven, you might want to look into that with ACCC before you get any more returns.

australia i used to live in australia '66 to '76 here stateside i got the black hunters, the reverse limb black hunter, the tbow hoyt copy, the iglow 70# compound with all metal cams. .dozens of xx75 arrows. .for less than half australian prices. .back when i was speargun fishing i could read your guy's skindiving handbook and make my own speargun per his plans and enjoy that era [ben cropp] before what happened to australia. .jus' sayin'

Hi! Which one would u choose between this one and the M125?

Hi there is this junxing m128 the same than bowmaster hitman? I'm going to buy a bow, I was thinking on the pse brute nxt but the plastic limbpockets.... Is this one like the pse?

What is string/ cables length??? I need buy replacement strings. But how long.???? Current ones are stretched I presume

Looks like a Mathews Triax riser with PSE cams.

I'm trying to adjust the Juxing M131. There aren't any markings regarding draw length adjustment,so I'm winging that... and the bow is a 50 pound draw weight. How many turns do I need to adjust to bring it down to 30?

Hopefully..the next reviews in 2022 is about, the best recurve bow strings..i need to know performance bout Flex carrera 99R bow string..are they low creep, about stretch, strand diameter, vibration etc..tq

Hi does draw length affect draw weight , like on some other bows , thanks

Does this bow actually true 31 inch draw.?? Thinking of purchasing one. If you know of any 31 inch draw length could you let me know what brands???

Have you ever seen the terminator t 600 Chinese mathews clone? Any thoughts?

Hey! I recently purchased this bow, based on your review in no small measure. I wonder what length of arrow you recommend for this bow having used it? I am trying to ascertain what length of arrow I need. I plan to use this bow to its maximum draw weight. Thank you!

@stephengatley8144

3 жыл бұрын

Your arrow length is specific to your Draw Length everyones is different this is the calculation you need to find out your arrow size (Not Weight) To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.

@stephengatley8144

3 жыл бұрын

Oh & your bow needs to be set at your draw length too, it's a simple cam adjustment!.

Hi Which is better M128 or M129? Thanks

Hi Steven is there anything similar that you know of price wise that is left handed?

compare this bow with the Junxing Pheonix with is better??? and whats the diffrent

knockoff VRX??!! I like it, where do I find it?

What cam system is better, the one from the m129, or m128? and are they compatible with each bow?

What do you think the longevity of this bow is?

What’s difference between this one and m120 and m127? Thanks

Could hou please give me the specs of the arrows you are using on this compound please 🙏 thanks in advance

Is a topoint or this one better?

it's seems a modified Junxing M108 Phoenix riser... Looks pretty similar riser between them.....

@jonc67uk

2 жыл бұрын

Different limb pocket angle. They're using a 3 part plug with the same centre section for the casting. It's just got different ends for different limb pocket/ limb combos. Some twat on AliExpress just sent me a 108 riser masqueradeing as an m128 just to be truly cheeky..

Hi, which one is better sanlida x8 or junxing

Hi Is it good for hunitng?

Update. Managed to blow riser on 3/4rd of limb bolt setting and "9" on draw length. I was jus tuning it at 60-80 arrows... It broke where limb pivot point is... And now i get it, whats the difference between machined riser and casted... I wrote to manufacturer but the hopes are low. Can someone recomend quality American bow with cheap price tag?

Hello. Sorry if its spam or whatever... Does somebody know if M125 string fits M128.? Cant find no info. Because of the roller issues, it might get iffy pretty soon (the bus cable). M129 has dropped roller quirck already...

@eeee3279

2 жыл бұрын

I ordered spare string and cable directly from manufacturer. 10 usd for the kit, 30 shipping :') God knows when my M128 and all other stuff will arrive though...

Have you tried the M122 from Junxing?

@bastianinostroza1150

3 жыл бұрын

I have the same question lol, I need a review on the caesar compound

Bros bad day is my current best day 😂

What part of those " American" bow limbs are straight? I honestly can't tell

Sounds like it would make a good toss about hunting bow

bought one, lets just hope the finish isnt terrible

@analiadaviana9250

3 жыл бұрын

So how it is?

@huixiaolin9378

3 жыл бұрын

@@analiadaviana9250 didnt have the same problem on the limbs, seriously impressed by the vibration, it seems pretty fast too

@jonc67uk

2 жыл бұрын

How did the cables/ roller guard hold up over time? I'm expecting one fairly soon.

@huixiaolin9378

2 жыл бұрын

@@jonc67uk They're as good as I remember them to be initially, but I wouldn't say I've been shooting the bow very often. I don't think I can give an accurate judgement

@jonc67uk

2 жыл бұрын

@@huixiaolin9378 I guess I'll probably find out eventually through experience lol. Thanks for the info. I'll probably end up shooting recurve barebow anyway most of the time as usual. I still don't really like compounds that much.

I don't know if anyone is aware it's by law if you sell anything in Australia you must provide a one year warranty its by law not 6 months as you stated for this item

The design screams Mathews (geometry, limb pockets, grip...) but in terms of BH is closer to the Evo NXT family (but the PSE are way faster). Seems to be a nice product but personally even for people on budget I would advise them to save a bit more and enter in the terrain of the stablished american brands. And I say it as a European using a Supra Focus XL and WNS Vantage for barebow.

Gday mate, so do you rate this bow higher, lower or good for value. Did you approach junxing about the marked limbs, or didnt bother? Are the yank limbs, better than the straight limbs? Id think youd be loosing poundage, as looking at the curve, prob loosing 2" on the spread when relaxed.

Очень красивый лук

Between Diamond Edge Sb-1 and this one, which one do you think is better?

@jeantrancan6482

3 жыл бұрын

@@nicework253Sb1.Why did you choose edge 320 & not Sb1 ?

@huixiaolin9378

3 жыл бұрын

i just bought m128 on its way and i have a diamond infinite edge pro that i can compare with in around a weeks time, let me know if ure still thinking

@simo805

3 жыл бұрын

@@huixiaolin9378 Results now plz :)?

@huixiaolin9378

3 жыл бұрын

​@@simo805 Unlike in the video, the bow didn't come with very bad finishing, though I would still say there was still minor finishing imperfections on the carbon film pattern, and the rubber grip on the bow. These were the major drawbacks. Comparing the 2 bows, there is a huge difference in the vibration that I felt. There was noticable shock in the diamond infinite edge when compared to the m128, and I found myself to aim much more steady with the m128. It is also much more top heavy. I also never liked the spongy feeling I had with the diamond infinite edge at the backwall, which I couldnt feel at all with the M128. I don't feel comfortable enough to comment on the feeling of the draw cycles since I have the 2 bows set at different poundages. Aesthetically, I prefer the M128 as well. I'd say the biggest letdown would still be the finish though :)

@inubanged2729

3 жыл бұрын

@@huixiaolin9378 is it fast? (M128) is it accurate? Please advice..

Do you know how they are able to price these so much lower than the American bows?

@doublelung5746

4 жыл бұрын

Well it's called a junksing so ? Junk!

@jameshawley6069

4 жыл бұрын

American high end bows are made out of higher end aluminum as well as machined risers, and R&D. This bow is a blatant rip off of Mathews current bridged riser. These guys are an archery cancer

@mohahram6951

4 жыл бұрын

They are able to lower the price because they spent 0 on field experience, knowledge, R&D and testing and just measured the dimensions of a several bows and blended it into that thing.. Add to that the less quality materials and cheap labour and cheap manufacturing overhead cost.. No regard or respect for innovation or quality.. But they will get there eventually by doing enough reverse engineering and charge as much as a US made bow.. Still will never buy a Chinese bow for that concept alone.. They are imitators not innovators

@kaikart123

4 жыл бұрын

They don't sell it with the brand tax.

@user-si6fk9er8i

3 жыл бұрын

The top brands spend money on making some fancy new features, testing them and designing new manufacture procedures for the new modles almost every year. The Chinese brands, on the contrary, use a same cam design on almost all of its bows, no to mention the design may be copied from somewhere else. They sell a certain bow for 2 to 5 years, and may still use some parts on new models. Chinese brands also have less staff, instead they pay some dealers and top shooters for testing. The product end up good to shoot, although having minor problems like easily worn cables or easily loosen screws.

Does Gordon know all these bow companies are using his limbs? 😉

Junxing! They got that right junk

what about m129

Junxing is pronounced "Choonseeng" (or "joonsheeng", something in between...) but definitely NOT JUNK KSING! :D

This bow or the max 7?

@user-bp1st8ez6d

2 жыл бұрын

The same difference in the cams

Cautionary tale: Bought from Junxing on Alibaba an M122 Powermax copy cat with Bowtech cams. Derailed it and cracked a limb, bent an axle. Was able to purchase limb replacements, however didn't realize axle was bent. Well CoVid shipping issues caused me to rethink the purchase, so I requested a cancellation of the order and they wouldn't. Once I realized the axle issue, I tried to purchase a set of axles, they wouldn't unless I bought a new bow. About to be exclusively American (Good Customer Service) bow guy. Considering Elite Valor as my budget bow, and my Mathew's No Cam HTR is a pleasure to shot.

@jimbob5b200

4 жыл бұрын

I'm from uk and P.S.E were absolutely brilliant made me some cams for a second bow for like 30 pounds each shipped top guys🤘, could you find a local tool room or someone with a lathe to whip you up a new axle simplest component on the bow and you got someone real to talk too !

Price please i waanna buy this is your shop open ?m posting this comment on fri 24 july

Looked on the home page can not this bow is this too new

In Asia I find this bow for 180 $ us or 155 euro

Buy nice or buy twice !

@teeess9551

3 жыл бұрын

Not all the time. I bought a Diamond Edge 320 from Apex Hunting outside of Brisbane. The employee who sold it to me even had one personally. I took it to the range for a couple of hours on a field circuit with the club president, then when I was sighting it in later another member pointed out that it was left-handed! I'm not. Being new, I had no idea. My girlfriend bought a trad recurve bow from the shop at the same time, but the guys at the range quickly picked up that one of the limbs was severely warped. Maybe it helped that she's a chick ;) So sometimes it also depends on if the people you're buying things from are observant and professional, or even care -- regardless if they've been shooting bows for over a decade or not. A four hour round trip later, we received new limbs and a refund.

Didn't you know, some bow from pse or hoyt were junxing rebrand

@huixiaolin9378

3 жыл бұрын

source of info plz

would it be difficult to name the other bows that can beat this bow in value/performance?

@YokeeLowkey

Жыл бұрын

bought the bow, it's pretty damn good

@Vi-pv3xi

Жыл бұрын

How is the bow now?

@YokeeLowkey

Жыл бұрын

@@Vi-pv3xi strings need to be replaced.. came with d loop not centered.. serving has since been worn.. otherwise a great bow

@Vi-pv3xi

Жыл бұрын

@@YokeeLowkey Nice. Thanks for the response

Chinese compound bow more cheeper and equel accurate than american compound bow... Anyone can buy it.. The quality and uses like same, why should buy the expensive item...

The name says it all. Junking lol

M125 is faster then this bow i think

@radzifagip

3 жыл бұрын

This bow maybe peak a second

i swear he looks dissapointed everytime he shoots

Um Um Um Um

No thanks. Buy a reliable brand secondhand bow.

@simo8x

4 жыл бұрын

Kenneth Osborne problem is, you won’t find a good, well known brand, bow here for $350 AU! Trust me, I’m trying! 😂

CoronaBow

@brewed544

4 жыл бұрын

I cant help but think of all those bows sold as a knee jerk reaction to the pandemic, will now sit in the spare rooms never to be used HAHA

30lb is nothing WTF?

too early.

Looks like a Halon rip off🤫

@RaneBane

4 жыл бұрын

The chinese? Ripping off an american company? I would disown my bowshop for selling these.

Chinese hey....lol good luck with that

Looks like a bad ripoff of a Triax.. Sorry but I will never be interested in a Chinese made bow

@davidsolomon915

3 жыл бұрын

Looks more like Mathews halon x comp to me?

@greenhoodedvigilante458

2 жыл бұрын

A lot of bow you can find in Lancaster which are rebranded as different bow, actually made in China. They make all kinds of things, from high to low end.

国内号称：军修斯，抄袭马修斯外观

It’s basically a poor rip off of Mathews style bows. You get what you pay for so don’t expect much from this if you are a serious archer.