Those oddities are what used to be called bosuns guns. If a cannon didn’t fire , a damp squib, they never had time to leave it etc, they had to be cleared quickly. They never fired a ball as such, but fired fire into the touch hole to clear the damp powder and hopefully ignite the charge, thus clearing the cannon. They were very unpopular because it was a very dangerous way of remediating a problem. They were used primarily in the East Indies where everything was damp .

@daffyduck780

23 күн бұрын

Sounds like a winner.

@geoffreypiltz271

23 күн бұрын

Makes sense. The curved grip means that you could fire straight down into the touchhole and not scorch your hand.

@zd9389

23 күн бұрын

I could especially see this if they just recycled old stock of pistols for something that they only needed a small handful of per ship. Or even used ones that failed QC of any sort.

@stanislavczebinski994

23 күн бұрын

@@zd9389Back then, labour was dirt-cheap. Having stocks made was surely no problem. The metal bits were a lot more expensive. Therefore, they recycled the leftovers of old scrap pistols.

@josephd.5524

23 күн бұрын

Exactly what I was thinking!

The ancient method of igniting a cannon was by use of a "linstock" ie a staff with a fork at one end to hold a lighted slow match. The linstock allowed the gunner to stand away from the cannon, both as it recoiled and as some part of the explosion vented out of the touch hole. By the mid 1700s, it was recognised that some form of mechanical ignition was quicker and more efficient and a rich variety of shapes and types resulted in the pursuit of the optimum igniter for a muzzle loading cannon. One type was a flint boxlock at the end of a long grip with a remote trigger. Another was a brass enclosed flintlock body, fixed to the cannon and operated by a lanyard. I suppose they could, if desired, be ready primed and there might be value in having more than one on hand. The circumstantial fact cannot be ignored that the exhibits shown are undoubtedly ship's pistols and were more than likely in the exclusive possession of the Royal Navy and stored at some time in the company of cannon. An article in the American Society of Arms Collectors bulletin by Dick Salzer and Matt Sears explains that in 1755, the British Admiralty issued a directive that all "Men-O-War" would have their cannon equipped with flint cannon locks. The decree was largely ignored until Sir Charles Douglas decided at his own expense to equip his 98 gun frigate HMS Duke, with such locks, improvised out of old musket locks. The resulting improvements in accuracy and rate of fire made the programme a priority. There was no standard design. These do seem to be potentially early specimens of cannon igniters, significant for that reason and notable for allowing some distance from the gun, but not very much. A design deficiency compared with the linstock. It is speculative whether they were used for Royal Navy purposes, or sold out of the Tower as surplus decades later and reworked commercially for merchant ships.

@pilkpulk8284

11 күн бұрын

Exact my thougt

@rafbuelens4908

10 күн бұрын

very interesting read. Thanks a lot.

Perhaps they are not for shooting per se, but for ignition? Like a developmental in-between of a match fuse and a built-in flintlock igniter on a cannon. Or a backup for said cannon igniter in case it misfires? That would explain the downward grip angle and the ridiculously short barrel. These remind me of the cut-down Lee-Enfields used on AFV smoke dischargers, as in a service firearm modified for a different use as a tool rather than as a weapon.

@samuelgarrod8327

23 күн бұрын

Are you going to make this comment a third time? Are you drunk?

@yermanoh

23 күн бұрын

ya that was my initial though an ignition system

@CAMSLAYER13

22 күн бұрын

​@@samuelgarrod8327youtube sometimes multiposts your comments

The first thing that popped into my head was adaptive equipment for a partial amputee.

@noth606

22 күн бұрын

That's where my mind went too, adapted for someone with some form of disfigurement/injury/disability. I'm stuck in a wheelchair and use a sort of gripper type thing for a bunch of things that would make zero sense and have no utility for someone able to stand up or crouch down. The handle of my gripper is VERY similar to the handle of these things, including the very long trigger bit.

@Lurker1954

22 күн бұрын

@@noth606 It was such a gadget that got me thinking. No Wheelchair on my end, but my arthritis won't let mr reach things up high anymore. I the thing my Long Reach.

@Lurker1954

22 күн бұрын

Sorry about the misspelling.s No Auto-correct on this thing.

@noth606

22 күн бұрын

@@Lurker1954 I'd be surprised if it wasn't for that in some way. The thing doesn't make sense for a fully able person in my view. I have tons of other things that are 'adapted' in one way or another for them to work for me with the way I can and cannot reach things and where I can and can't go. As an example all electric things are plugged into extension cord splitters, because I can lift them with my gripper and bring them up and then plug/unplug things in my lap, nothing is ever in the back of cabinets apart from very tall things because I can't see or reach small things low in a cabinet above my head level. But the point is that I adapt my environment and tools etc to what I can and can't see/reach/use etc and I know others in similar predicaments do as well, to a varying degree but still. I know some people who insist on domestic help doing all that sort of stuff for them but that's absolutely not my jam.

@tristan4777

18 күн бұрын

My first thought was accessibility too. Perhaps if some one was wearing gloves, which did also get me wondering if they might be used in low temperature environments.

My first guess is that they are intended to be used to repel boarders by sticking them out of a cannon port. Or around a corner. It would explain the damage to the wood under the barrel since they would probably be they part that they would take impacts when braced against the door frame or port. I should admit that I came to this conclusion before hearing Mr. Ferguson come to the same conclusion.

@Tenebraxis649

23 күн бұрын

maybe also for shooting at attackers from fortification/castle walls where they were too close to aim your rifle properly

@stephenhester9804

23 күн бұрын

Shooting from an elevated position like Rigging ?

@ssanneru

23 күн бұрын

I was thinking the same thing... a la the Krummlauf add-on to the Sturmgewehr. How about shooting over the inboard bulwarks of a slave-ship? The waist, the area between the fore and main masts, was used for exercising the "cargo", it was blocked off from the forecastle and quarterdeck by tall bulwarks in case the cargo got feisty during this evolution, the crew could then subdue the uprising from their protected positions fore and aft.

@hbomb3251

23 күн бұрын

Ah shite I came to a similar conclusion before I noticed your comment and before Johnathan came to a similar conclusion 😅😂😅😂😅🤣🤦‍♂️

@sidewalks29

23 күн бұрын

Maybe it was using to shoot something inside carriage or outside the carriage?

these look like the kinda cartoon pistols where the bullets will do 90 degree turns around objects

@HappyBeezerStudios

18 күн бұрын

And for a real curve, the Krummlauf exists.

@arghjayem

16 күн бұрын

Except that the barrels aren’t the weird bendy part of these, it’s the handles and the trigger mechanism.

@JackCabbit20

16 күн бұрын

its a joke about cartoons dude, stuff dont make sense in them anyway

@JackCabbit20

16 күн бұрын

true

The shortened barrel suggest it is not intended to shoot things. The offset grip enables the hand to be behind cover, but it cannot be aimed unless your head is over the cover. I suggest they are intended to start fires. Load with a lot of powder but no ball. Put the muzzle into a barrel of tar or the like and the muzzle flash ignites it and the offset grip keeps the hand clear of the flames. Fireships maybe.

@Drakith90

23 күн бұрын

Seems like a convoluted way to start a fire when the main mechanic of a flintlock pistol is.. you know.. flint and steel. Just build everything up to the flashpan and call it a day.

@gorbalsboy

23 күн бұрын

Interesting 🧐,their was flintlock firestarters available at the time (have a Google if you are interested)I shall go with shooting down hatchways ,all the best from sunny Troon 😊

@charlesphillips4575

23 күн бұрын

@@Drakith90 I am suggesting a serious fireball to rapidly ignite large fires. With no ball to build up pressure one could fill the barrel with black powder. Perhaps with some additives to create additional incendiary effects, magnesium?

@ArminHamner

23 күн бұрын

Sounds ridiculous and improbable.. Besides SHORTENING A BARREL DOES INDICATE IT WASNT MEANT TO SHOOT THINGS YOU FUDD.. ITS PROBABLY SO THE GUN CAN BE FIRED FROM SAFELYINSIDE AN EMBRASURE. OR FOR A BOONY TRAP

@ArminHamner

23 күн бұрын

Booby*

Clearly so you can hold them high above your head while "aiming" at your foe, very popular amongst 18th century gangster rappers.

@mementomori771

22 күн бұрын

This got a good chuckle from me thank you

@davidflournoy5355

8 күн бұрын

Lmao

While I think Jonathon's theory is a good one, other ideas that came to mind for me- -Booby traps. The long trigger gives a lot of leverage for a tripwire etc to act on, the crescent spur on the end gives a convenient point for some kind of lever or wire to be attached. Doesn't explain the weird angle though. -Handicap adjustment for a disabled shooter, recreational or service purposes. They might have some kind of hand or arm injury that necessitated the weird trigger and stock arrangement -Perhaps they are meant to be used upside down, the trigger finger grasping the end of the trigger, the angle would then be pointed up. They could be concealed under a table or similar to shoot someone seated opposite (I'm picturing the scene in Tombstone where Wyatt Earp has a sawn off wired to the underside of a card table -As others have suggested, they might be adapted for some kind of very specific non-weapon purpose, for lighting a fire, signalling, firing artillery etc. Probably made sense at the time but without context looks bizarre

@johnhodges8264

23 күн бұрын

If you tried to fire it upside down all the priming powder would fall out.

@edwardgurney1694

23 күн бұрын

@@johnhodges8264 Good point, hadn't considered that!

@truckerjesus8633

23 күн бұрын

@@johnhodges8264 the priming powder enclosed by the frizzen, you mean?

@AnarchyShogun

23 күн бұрын

@@truckerjesus8633 would still be spill out around the frizzen. Additionally, as the frizzen is opened by the falling flint, the powder would tend to fall away from the touch hole. While the flint is moving very fast, this would still increase the chance of a failure to fire.

@inyrmind

23 күн бұрын

I was thinking the same, either ye olde cornershot or for use of booby traps

First thing I thought of in the first few seconds of the video was portable locks for firing cannon ! Glad to see other people have the same idea !

They could be "Walking Stick Pistols". The fact they were sawn off leads me to believe that someone wanted to locking mechanism (which attaches the stick part to the pistol through the barrel) to no longer be there so it couldn't be a walking stick anymore, maybe for legal reasons. I have seen similar 17th & 18th century firearms that look similar to these have the stick attachment.

@MB-st7be

14 күн бұрын

Holy moly that's a pretty good theory ! Walking sticks that got sawn off later! :D

Maybe an attempt at a cannon ignitor for older pieces that couldn't fit a gunlock.

@msmith2646

23 күн бұрын

That's a good idea. Blank load it and fire it into a fuse hole on a cannon. The long handle means your hand is protected at the side of the cannon, and you don't have recoil to deal with.

@dreww2647

18 күн бұрын

Looks like you were right. Bosun's gun for clearing unfired cannons.

@MB-st7be

14 күн бұрын

I don't buy it. Guns without locks were used for centuries and nobody else felt the need to make igniters out of pistols

@erinreagin8003

8 күн бұрын

@@MB-st7be If they were a good idea they'd be more well known.

These sorts of experimental objects are the absolute best. The mystery of their use and design makes them incredibly intriguing, and even when those things are known it is so fun to see the paths unfollowed. More of these pieces please!

@RoyalArmouries

21 күн бұрын

We'll see what we can do ;)

The handle looks like it's meant to be held upside down and the forefinger would go in the additional curve at the end of the long trigger and the bulbous end meant to rest against the web of the hand, possibly to fire underneath something from concealment.

@kermitthemushroomman4332

23 күн бұрын

Agreed, Or if someone had limited joint movement so they could potentially be able to get on target accurately and easily with said limit.

@aeromangus

23 күн бұрын

Maybe you hold the gun upside-down but actually it is you who is upside-down in Australia, so... 🤨

@andyleighton6969

23 күн бұрын

Problem firing a flintlock upside down, As soon your sparks - not to mention your priming powder - would fall AWAY from the pan and touchhole.

@dwaneanderson8039

23 күн бұрын

This is what I thought too. I don't have any idea why you would want to shoot a pistol upside down, but it looks like that's what it's designed for.

@kermitthemushroomman4332

23 күн бұрын

@@andyleighton6969 I was thinking the same unless the powder pan was cupped to create a pocket of powder, but yea gravity does play a big role against the idea.

Could they be used to fire a blank charge in to a cannon touch hole or similar?

My thought is that these pistols could be made for naval service men (officers?) that have lost some or all main digits, and the trigger is an adaptation to get to the remaining outer fingers to trigger the lock. The angle could improve a grip weakened by finger loss.

@barenmarder

21 күн бұрын

This was my thought. Peripheral nerve damage can fuck up your hands something fierce (ask me how I know) and my knee jerk thought was "someone had these made to compensate for a hand injury." They would make sense if you lost strength in your index/middle fingers and had to use the pinkie or ring finger to pull the trigger? I do love a mystery, and all the speculation that goes with.

I'd guess they're not firearms, but firestarters. You load them up with just wadding, put the barrel against something flammable, pull the trigger; instant fire. They show damage at the front because they were jammed against the edge of a container. They're curved like that to keep the hand out of the fire. The barrels are short because no accuracy is needed.

@williestyle35

22 күн бұрын

Maybe. But the flint is right there and would start a fire well enough. Maybe to put fire into the touch hole on a cannon... (someone already suggested that).

@fritzedelweiss

21 күн бұрын

They are for igniting ship’s canons I guess, thats the leading theory and what makes the most sense so you arent even to far of with starting fires

thank you

awesome history, thank you for showing us

For use on an Arctic/Antarctic expedition? Where use of heavy mitten or gloves would be a consideration.

@Yora21

22 күн бұрын

That was my first thought as well. But the hypothesis several people made about this being a heavy duty safety lighter rather than a weapon seems much more compelling.

@tnexus13

22 күн бұрын

Definitely my first thought, especially with the left pistol. Short barrel allowing for easier storage, less weight, and quicker drawing against surprise polar bear. The extra trigger shaping on the right pistol doesn't make sense for the hypothesis though.

@seanshea8596

19 күн бұрын

This was my thought. People forget winter combat.

@Eidolon1andOnly

15 күн бұрын

Bosun guns for clearing out cannons with damp powder that failed to fire.

Possibly some kind of special tools. For example, to break blockages in pipes where you shouldn't stick your hands in. Once we had a chimney so blocked you couldn't open it, like shooting from the bottom with a pistol. That could be very practical for such an activity.

Fascinating

My guess is it was meant to convert old flintlocks that had become obsolete into some kind of utility device. It has the feel of "Let's see if we can do something with this rather than throw it out." It reminds me of attempts I have made to repurpose things, which always failed as well. I agree with some of he other comments here that the barrel is too short to fire a bullet with any accuracy, but maybe someone thought it could be used with powder only to ignite something. Even on the off chance it worked, it looks like it would have been too much effort to convert large numbers, so it wasn't adopted.

How about defending a fighting top from people below climbing the rigging. Or defending any ship from people boarding in small boats.

Locktraps maybe? They are perfect for a fishing line trigger

I would guess igniting a cannon while keeping your hand relatively safe.

@MB-st7be

14 күн бұрын

But why? No other gun crew felt they needed such an elaborate contraption

@historysmith9597

14 күн бұрын

@MB-st7be actually, there were flintlock ignition systems for cannons, some fitted directly to the cannons, others hand held. As to why the answer is money 💰 if you could invent something and sell it to the military, you'd be ritch..

In the admiral museum in Dokkum (Netherlands) there are also a few, with the text stating that these pistols were used to shoot scrap metal into sloops. from other attacking ships, which would be a reason for the strange construction because you shoot down from a high deck

I agree!

with the barrel that short, and the curve to keep your hand out the way, could they be intended as igniters instead of weapons? say if a cannon charge didn't go off, you touch one of these to it and light it that way? not sure what else might have needed rapid ignition?

Looks like something someone would cobble together for the Arctic. Perfect for oversized gloves....

My immediate thought was some sort of holdout/last redoubt pistol. As you say shooting over parapets would work. But also if forced to retreat to the structures on the quarterdeck, poking it through a hole & firing means that if someone shoots back they'll fire over your head, meaning you don't get a face full of splinters. Accuracy on your part wouldn't need to be that great if loaded with bird-shot & the sawn-off barrel would give greater spread.

am def thinking igniting something whether canon or mortar, maybe as backup. Held at arms length away from the touch hole, pointing down. I don't know enough about muzzle loaders as to how well the charge would stay seated though?

@jameshealy4594

23 күн бұрын

You would need some sort of wad but that isn't difficult

Shooting over a wall was the first thing that came to mind.

Is that Jonathan Ferguson, the keeper of firearms and artillery at the Royal Armouries Museum in the UK?

Hello Jonathan 👋🏼

@johngreen-sk4yk

23 күн бұрын

Drat second !!!! Lol

@samholdsworth420

23 күн бұрын

@@johngreen-sk4yk 👋🏼 🤗

@johnsmith-jq1uc

23 күн бұрын

* Keeper of Firearms and Artillery at the Royal Armouries Museum in Leeds

I think that Jonathan's speculation is most likely, but I could also see them being made to accommodate a disability. The way he held it didn't look right, but if that was the best someone could do and they still wanted to shoot, it seems possible. Might also be why the barrels were cut, in an effort to make them a bit lighter.

I was thinking it could have been a purpose-built handicap type modification 🤷

@GunsmithSid

23 күн бұрын

Yes - wondering what a prosthetic hand of the period looked like.

@daza3620

23 күн бұрын

I was thinking the same.

@danburycollins

23 күн бұрын

This is exactly where my mind went as well.

Could they be expediently rebuilt for use in a howdah (where you intend to shoot downwards at silly elevations). Would also potentially explain the sawn-off barrel.

I like your guess more than my immediate assumption which was that they maybe designed for someone less abled maybe some one with an injury or birth defect whom could not use a standard pistol very interesting pieces thanks for sharing

"what I will say, is that they have both lost wood" 🤣

@waldemarkirszniok298

5 күн бұрын

Losing wood with age is inevitable I’m afraid…

Clearly this set of pistols is designed to be operated by an octopus. The extremely elongated grip and trigger lever allows plenty of room for it to wrap its tentacles around it.

@Manco65

23 күн бұрын

Ayy.....arm the Kraken 😅

With the grip so far down the grip, they must be used for shooting down, maybe from the masts of ships

The handle reminds me of the curved handle of the Bisley-style Single Action Army revolvers that were designed for competition shooting.

The sort of thing that was preserved because it was weird even in the time when it was made.

could those be build for the use with prothetics?

Pistols used to make trapped doors on a ship or fortification. Hence shortened barrel and the stock/grip shape. You could secure it into a cup mounting and the trigger is setup to easily attach a tripwire. That is also why no belt clip, you wont be running around with it. It would be setup or in storage. Should be able to set that up pretty much anywhere on a ship with time to do so, gun ports, doors, stairs, ceiling, floors or walls. Neat design. Your welcome Johnathan and british armory. 😊

Could it be to manipulate the trigger in heavy gloves?

My guess (doubtless incorrect judging by other comments) was: sawn off, so short-range weapon; grips designed to orient the aim downwards - experimental cavalry pistols for shooting nearby infantrymen (or gunners) without having to cock the wrists awkwardly.

my first guess was, that these was created for shooting with heave gloves but the 'cornershot' hipothesis is more plausible I think

Your speculation was the same as my initial thought but as the video went on I had an issue with that being of course how little added protection you would get, compared to using any other pistol, basically none, plus you are almost certainly going to miss since you can't see. Then I thought, what about for shooting around corners down corridors, in this case, you can hold your arm stretched all the way out, if your opponent attempts to shoot you through the wall, you will be standing much further from the corner than they expect, and likely miss your arm and hand, and in that circumstance, in a narrow corridor, a blind shot isn't so unlikely to hit when you shoot if they approach.

Those are early versions of the SG42, shooting around the corner guns. Instead of looped barrels in a few SGs, they bent the grips 180 degrees, very slick.

I don't know if you all would do a video reaction to a new weapon made but Brandon herrera has officially created a .50 BMG AK platform that works and I would love to see Jonathan's reaction to it

I've never used ancient firearms, but I am a Marine and the FIRST thing that came to mind, seconds into the video, was firing at boarders of a ship without exposing yourself to losing your head to a sword swipe / cannon ball.

Cold weather mittens would fit that grip if you ask me , so winter or similar conditions would call for such

It seems like there may be an answer, but I want to share my theories anyway: My first thought was that these were used in early military balloon service. The bulbus end would sit in a leather ball joint to steady the Flint while firing downward. Of course the problem there is that the pan would need to be more cupped otherwise the gunpowder would fall out. My other thought was that this was a weapon designed to be used by someone wearing gloves. And so my thought was then that perhaps this was a weapon used by someone operating a coal fired steam engine, perhaps on a train or an early steamship which would allow them to fire a weapon without having to take off their gloves.

As a US Navy armorer, my theory is this is for sure something a Navy armorer made just because.

If it weren't for the strange curved grips, those long triggers would be good for shooting with mittens. but well, good luck reloading a flint lock with mittens on.

I enjoyed the lighting much more in this video as opposed to the last videos in this series. Sometimes the lighting is too dim for me to get a good look at the firearms. Thank you for your videos, tho. I very much enjoy them.

The angle and short barrel might work well for dispatching an animal. Would a veterinary pistol make sense for the time period?

@howardmaryon

22 күн бұрын

I thought that too, having had the misfortune to have to assist in the putting down of a badly injured horse, by an equine vet, I can attest that the vet had to reach up very high and point his pistol at a difficult angle to ensure a clean and instant kill. These curved stocks with extended trigger would have been helpful (not for the horse)

@christianfritz6333

19 күн бұрын

I was thinking the same thing, I think the fact that they were originally navy is throwing everyone off, it would be used 2 handed, grabbing the stock with one hand and reaching up to pull the trigger with the other. To dispatch a large animal like a horse.

Does the Royal Armory have and super soakers? The OG yellow one perhaps?

I know what they are: gorgeous 🎉

The audio is a bit weird on this one but it was still fascinating so thank you

Looks like a prince rupert's drop Prince Rupert's lead

To build on what seems to be the most popular use,shooting over something,that might explain the cut off barrel. Perhaps to aid in dispersion of multiple pellets. That would make sense for a very short range weapon.

Are they more ergonomic held upside down?

Ment to use with thick mittens?

Early (by almost 200 years) version of the Krummlauf for the StG 44?

In the oil industry, nearly every operator has a "Wheel Spanner", not officially recognised as a tool, all made on the sly. Used to open or close valves, they could do a lot of damage if used incorrectly. This sounds like a gunners' Heath Robinson tool which the authorities turned a blind eye to, just like the oil industry does to the wheel spanner.

If I had to guess, I would say that they're made to be poked out of a small porthole, possibly to fire down at a boarding party in a longboat/dingy or to shoot out the porthole, laterally, perhaps at boarders, or even to shoot around from a porthole at someone trying to breach the door to the captain's cabin, or the hatch to the lower decks. shoving them out of a small porthole would also explain why they needed to be chopped down so much, AND why they're missing wood at the spot below the barrels that would knock and rake the frame of the tiny porthole as it was roughed through, and where it may be wedged as it fired, knocking back to damage the wood behind the hammer. I would not be shocked to discover that these were bespoke pistols for a captain, or his cabin boy as last stand weapons when barricaded in his cabin, needing only to shoot a pace or 3 distance from his tiny window to his door, OR for an intrepid crewman that thought to fight from below decks via a small porthole of some kind. Heck, could be a cook, who's tiny round porthole for ventilation would also offer such a great angle on the enemy, if only he could shoot around at that confounded angle! 🤣

Is there a correlation between these and some cavalry pistols that also had oddly, acute, angled grips. The cavalry pistols were made that way because they would be fire downwards and it was claimed this created a tendency to overshoot the target if they were infantry. As these are sea-service might they have been intended to be used from rigging stations or crows nests in the event of a vessel being boarded and enemy scaling the rigging. Could the grip angle and extended mechanical elements of been intended to enable use in firing downwards into enemies climbing up, whilst the shooter could remain mainly concealed by the wood structures of the nests/platforms ? That may just be my wordy way of saying 'haven't got much of a clue apart from that '.

what if you hold them upside down? As in an under desk or bar gun

They look like they'd be easier to hold upside down?

I also think it's for shooting around corners, more specifically for the defense of a merchant ship. A merchant captain acquired them from the navy after the pistols were decommissioned and the ship's carpenter modified them. Because merchant ships ran on as small a crew as possible (higher profits), they generally had no chance of confronting pirates and a common strategy was to have a fortified partition below deck with gun ports facing the stairs. From there the crew could take potshots at the pirates and hopefully discourage them enough to leave. The distances would have been very short and since pirates typically boarded in great numbers (to demoralize and to overwhelm the crew before the pirates took too many casualties), it was more like shooting into a crowd than at any particular person, so not having a sightline might not have been that much of an issue. In this defensive role it also makes sense to remove the belt hooks, because you'd want to store them behind the foritification and having belt hooks on them would encourage the pistols to "grow legs" and be unavailable when urgently needed.

Obviously the Elephant Man’s brace of dueling pistols.

they're supposed to be used with a muzzle device that's unfortunately missing. It deflects the blast down, and the circular handle lets the pistol rotate in your grip. Recoil compensation similar to the KRISS Vector.

Just a thought, maybe that knob at the bottom with the weird recurve bit is actually so you can hold the gun *by the knob* and then fire it with your index finger with that recurve bit as the trigger? It'd be good for shooting around a corner I guess, which seems bad? Might explain why people don't bother, but it's worth noting someone could also carry a mirror and use it to site their gun? It'd be risky for the mirror, but that'd be a risk a soldier would take I'd wager?

MY first thought was a signal, warning, booby-trap pistol. But I like the @rafererrante explanation.

I thought that too, shooting out the canon hatch (holding the ball end to get more reach over the cannon), or an executioner's gun, it looks different as it more symbolic , short barrel as it wiuld be placed on top of the head (person on their knees). Bullet would shoot straight down

The obvious guess is for shooting around corners, or as suggested in the video, over the side of a ship. Another option is that in the 1700s, it was not yet the standard to teach every gun user to always aim with a straight arm. So maybe some gentleman thought that it would be easier to aim when the gun is closer to his face. So if the gun is hold with a bent elbow, it becomes difficult (uncomfortable) to bend the wrist joint to the point where the gun would be horizontal. Therefore the handle would need to be bent. Several other comments have suggested that it's for igniting cannons in case of damp gunpowder that wouldn't otherwise ignite. That sounds plausible too.

Was watching QI the other day and pretty sure I saw Jonathan Ferguson Keeper of Firearms and Artillery being a maxim gun on the site for Stephen Fry to explain that soldiers used to piss into the water jacket.

@Awoken_Remmuz

22 күн бұрын

Ah yes that episode, yeah it's kinda funny coming back to that one now that Jonathan has become more of a public figure on the interwebs.

i have a theory, you can shoot them when you're laying down in bed, these are bedside guns, for the extra lazy

@RannonSi

6 күн бұрын

That was my first thought as well! :D

first thought was a quick draw duel pistol. it never leaves holster maybe slung inverted in holster for faster firing.

How much opium was smoking the guy that made these... things? lmao

Held sideways with the index finger on the smaller loop of the trigger (so the other way up to usual) and used to fire around a doorway maybe.

My first thought was that they look as if they should be held upside down for whatever reason lol.

For service in the Arctic so you could hold and fire them whilst wearing thick mittens?

Those are pistols made after a visit from the Good Idea Fairy.

I believe the first shot stuns, and the second kills. The jafah make great use of them

I think is meant to be held up side down. Use the trigger finger. May be for hanging from rigging?

The first harpoon cannons for whaling went into service in 1737 These were used to ignite them.

I don't know about the mechanism where the powder goes but the elongated trigger and the shape of the handle may suggest a upside down holding to prevent maybe water to drop on top, but looks too complicated for something that probably wont work

I don't know why but the first thing I thought was: "Aren't they supposed to be held upside down?"...

Maybe these have been specially adapted to accommodate someone who couldn't use their hands properly _(or even didn't have hands (anymore))?_

I'm reading a lot of good speculation here so I'll throw in mine. Purpose built dueling pistols. Spring these on the duelists so they can say they stood and honored themselves while not hitting their target and hopefully the other would find it difficult to aim and hit them.

are these made to fired upside down? putting your pointer finger in the spur

Its for firing over walls or around corners and short barreled because its for close range I've seen something very Similar and of colonial era. The linkage is so you fire it without exposure of your hand to the enemy . im told its used to fire from a covered position such as over a wall around a corner or from holes in walls or cannon ports

I'm thinking either for a sailor with an injured or actual missing hand OR for firing around corners and obstacles or through windows along the side of a ship to repel boarders. OR for strapping to an object and firing from long distance using a lanyard. OR for using as a booby trap in a similar way, you open a door and via a system of pulleys, the gun fires at you.

@jamesallred460

23 күн бұрын

How would these things help an injured or crippled person? I can't picture it in my head at all, but maybe you have an idea? I've seen several people in the comments suggest this so I'm curious as to what y'all are thinking.

@astronomenov99

23 күн бұрын

@@jamesallred460 it might be easier to strap into a prosthetic hand? Using a lanyard on the trigger to be pulled by some other body part? Teeth?

Early flare/illumination signal launchers?

Those pistols definitely committed crimes against the crown

I can see these being used as a sort of hammerlike weapon in a melee?