Joinery Made Easy: 7 Ways the Router Plane Makes it a Breeze
Тәжірибелік нұсқаулар және стиль
The Katz-Moses Router Plane Presale SHIPS FREE kmtools.com/pages/km17-router...
Even the most hand tool phobic people think a router plane is one of the easiest and most effective tools to use in the shop. In today's video I walk you through my favorite uses, tips and tricks for using a router plane and how it makes joinery a breeze.
Let me know what you’d like to see next! Please like, comment and subscribe.
----
The Katz-Moses Router Plane Presale SHIPS FREE kmtools.com/pages/km17-router...
My Favorite Marking Gauge kmtools.com/collections/dovet...
3M Xtract Cubitron Sandpaper Fastest Sandpaper Ever Made kmtools.com/collections/3m-sa...
Our Newsletter kmtools.com/pages/kmtools-new...
Our Charity kmtools.com/pages/kmww-charity
The Katz-Moses Router Plane Launch Video • The Katz-Moses Router ...
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
Donate to The Katz-Moses Woodworkers with Disabilities Fund kmtools.com/pages/kmww-charity
----
Timestamps
Intro 0:00
What Does a Router Plane Do? 0:15
Take Small Bites 0:35
Rabbets, Dados and Grooves 1:38
Dialing in Mortise and Tenon 3:29
Half Lap and Bridal Joints 6:13
Hinges and Box Lids 7:17
Tough to Reach Areas 10:07
Routing and Planing Curves 10:33
Auxiliary Base 11:12
The Katz-Moses Router Plane 11:30
Newsletter Charity and Outro 12:23
----
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
Пікірлер: 137
*The Katz-Moses Router Plane Presale SHIPS FREE* kmtools.com/pages/km17-router-plane-pre-sale *My Favorite Marking Gauge* kmtools.com/collections/dovetail-tools *3M Xtract Cubitron Sandpaper ON SALE* We now carry the Fastest Cutting Sandpaper Ever Made kmtools.com/collections/3m-sandpaper *Our Newsletter* kmtools.com/pages/kmtools-newsletter *Our Charity* kmtools.com/pages/kmww-charity *The Katz-Moses Router Plane* Launch Video kzread.info/dash/bejne/l519psp6nbqwnKQ.html
@patallen4904
Жыл бұрын
Hi Jonathan, I've just received my awesome hand router. It's a work of art. Many thanks 👍
Awesome book that gives you step-by-step photos kzread.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!
I was given a 1901 Stanley router plane and it has become my go to tool for finishing of any joinery. Before in was given it I never new they even existed. I have a lot of old planes and vintage tools but this is the moat used in a modern joinery workshop.
Without my router plane I would not be able to build guitars the way I do. They are incredibly useful tools, and I think every woodworker should have one. I quite like your design, I may pick one up in the near future.
This looks like a really great piece of kit. If I hadn't literally just bought a veritas about 3 months ago, I'd be all over this. Keep up with designing these awesome tools!
I love this tool. I'll get one when I'm able, every woodworker needs one and this one seems to offer the most features. I work in metric when I can, but very often I can't.
I can not wait to get my hands on this thing! I don’t think I have ever been more excited about a tool purchased
@katzmosestools
Жыл бұрын
Sweet! We have the first of two batches showing up soon!
I've said for years that the router plane is one of, if the THE, best tools I own. Happens to be a Lie-Nielsen. I use it on so many projects. Much success with this new offering, Jonathan.
@katzmosestools
Жыл бұрын
It really is the best
Was gifted this tool by my wife. Absolutely beautiful and can't wait to put it to work. Great stuff Jonathan
I just received my router plane from you yesterday. I also ordered the 4pc knife set. Jonathan it was so worth the wait and it’s a great tool. The quality of this is second to none. Hope to see more collaboration with Hongdui in future. Love it
There have been more times that I’ve needed or could’ve used a router plane than almost every other tool. I’ve definitely needed it more than any other plane. After weighing the pros and cons over the past year or so, I’ve finally decided and ordered the KM-Tools on Black Friday. I think the KM/ HONGDUI addresses every flaw or issue in all other router planes on the market. And I’m digging the I chromium steel used to reduce the rusting. One less tool to constantly have to chase rust from in my hot humid Houston shop.
I just ordered the KM-17 and the blade set. Can’t wait to get it in
Just bought a router plane last week, so this is very timely!
@katzmosestools
Жыл бұрын
You'll love it! They're great!
Happy woodworking Jonathan and greetings from Australia. I have been watching your channel for a while and finally remembered to subscribe. I love the variety of topics and projects you create. Your workshop is a great backdrop for your videos and you did an amazing job on the router plane. Regards One Handed Maker
This beautifull router just arrived at my house i was so impressed way it is made. I was blown away with it what is super is the instruction manual excellent it is . australia.
Looking forward to getting this amazing plane
inspiring design work on this, well done!
Looks like an awesome router plane.....congratulations Jonathan! I'd really like to see you do a short video on sharpening the blades on your router plane since they are a unique design.
Thanks for convincing me to get another tool I didn’t know I needed
Awesome stuff Jonathan! 😃👍🏻👊🏻
If the build quality holds up to the design this will be a wonderful tool. I have placed an order and am eager to see.
I've been building our new house for like the last few months and I don't have a shop at the moment but I also have a brand new router plane that I haven't even had time to play with. So I enjoyed the video thanks
@katzmosestools
Жыл бұрын
You're going to be really happy when you do
Needed this video, another great one 🤘🏼
Great looking tool, way outside of my use case but if I ever get to that point I will get one for sure.
Love this video! Looking forward to more content Pak!
Zero backlash! That’s wonderful engineering.
I bought the Lee Valley router plane a couple of years ago and it revolutionized my woodworking. If you care about precise joinery, you NEED a router plane. I just ordered the KM router plane, because I can see several advantages it has over its competitors: the precision adjustment screw and the standard/metric scales to name two. I’m looking forward to putting this too, to work!
@katzmosestools
Жыл бұрын
Awesome!
Great tool!
Can't wait to take it for a whirl!
8:25 very good point… that’s maybe why I always liked more the traditional ones ?
My deep dive into whether to get the Veritas or the LN led to this video, and a purchase. It seems like it combines the advantages of both with the addition of the depth gauge.
Dude, that is the best looking router plane I have seen. (Only been woodworking for a few years so I haven’t seen them all.) if my wife would let me I would order one just for the measuring gauge. But it looks rock solid too. I will get one eventually but I am drill saving for Still a 5 1/2 plane.
I was hoping you would also talk about sharpening a router plane iron as well, and how it differs from hand plane irons.
@dougmanter8002
Жыл бұрын
Based on what I saw in the first video, the KM sharpens like the Veritas. The blade mounts to a bar which goes into a honing guide. Those like LN are 100% by hand.
@ryanglick3894
Жыл бұрын
I know that you are suppose to sharpen when first used. Since it came from you are they ready to go out of the box?
I found this router plane on a popular Chinese marketplace When I asked Rex Krueger to take a look, he mentioned you now I'm subscribed here too
Great. This looks like it would save hours of frustration.
@katzmosestools
Жыл бұрын
It is really useful
Omg I didn't know you had your own now I have to buy one of them to 😅
Ordered one today! It’s gonna be a LONGGGGGGG 6-8 weeks!
I am Impressed by the price /quality of the tool you have made . We will see what it gives in CAD $/shipping.
Your voice and how to speak are very easy to understand
Looks amazing. Can you do curve lines with it? Trace designs?
I've owned a L-N and a Veritas. The K-M is a big improvement.
Really fantastic tool, Jonathan! Amazing work! 😃 You choose the brand very well! They really make some fantastic stuff! Anyway, stay safe there with your family! 🖖😊
I just received my router plane and can’t wait to try it out. I actually have a project on my bench right now waiting for me to try it out! It looks great with very solid construction and serious attention to detail. One suggestion… perhaps some type of plastic cap to protect the blade edges? Thanks for all the great videos!!
@UserNameAnonymous
Жыл бұрын
I remember when my router plane first arrived. It was every bit as satisfying as I'd hoped. Might even be my favorite tool. Hope you like yours as much as I do.
@puppydoc7949
11 ай бұрын
@@UserNameAnonymous I've used it a few times and it's a dream! I was really impressed with how easy it was to set and go!
This tool is currently on the top of my wishlist. I am curious about one thing. A few months ago you and Tamar worked together on a trim router base plate. You mentioned using a base plate with this router plane several times. Does the 3x3 trim router base fit using pre existing holes in the base plate. Would you recommend using these two together? Thanks. I am very excited about this router plane.
Awesome Video. Now I want one. One question, before I buy, how do you sharpen?
Bought it the morning it was announced. I imagine eBay is going to see quite a few used router planes go up for sale once these ship
@katzmosestools
Жыл бұрын
🤣 whoops
It looks amazing Jonathan, well done! Any idea on shipping and taxes to the UK?
Look boss! The router plane! The router plane!
You should sell an auxiliary base, preferably transparent acrylic, already predrilled for the router. I've been meaning to make one for my Veritas but procrastination prevents me.
@katzmosestools
Жыл бұрын
That's a really good idea. We have the acrylic
@tannertasman
Жыл бұрын
@@katzmosestools I'd buy one
Well I’m sold.
Is the depth adjustment quick release? Like open the adjustment screw and allow the cutter to bottom out instead of turning the adjustment screw and feeling/seeing the plane moves when it bottoms out
saw you on Blacktail Studio. Man you where lucky.
Could you please make a video on how to sharpen those blades? Especially that corner blade. I want to buy one.
Plane is sold out, but no way to sign up for notification when you restock! Can't wait to get my hands on this!
Greetings Jonathan, very excited about using it as well, ordered mine earlier this week, do you know when you expect them in?
@katzmosestools
Жыл бұрын
First batch soon and second batch in about 6-8 weeks. Not sure where you fall in those. I'll send an email to everyone
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
Very nice looking tool. I just placed my order and cannot wait to get it. Do the blades come pre-sharpened or will I need to sharpen them?
@katzmosestools
Жыл бұрын
They come sharp and ready to go. Strop if you want to take to the next level.
"Tools I didn't know I needed"
Ever thought about an inlay cutter head for your excellent plane?
Jonathan, do you have a 1/4 cutter for dado?
Its like I was sitting with my coffee ready for a JKM video. No better way to start the day!
@katzmosestools
Жыл бұрын
Awww thanks bud!
@einsteinbpc
Жыл бұрын
My day always starts better with a new km video
would one of these be any use shaving a weld in pvc windows?
Will Veritas router plane blades fit in this router plane?
I'm searching for a router that will cut a binding ledge onto a guitar for edge binding. The channel is usually about 2mm wide and 5-8mm deep along the corner of guitar bodies. Could this tool to it?
I wawnt that!
I love this tool. Do you take lay a way. Lol
@katzmosestools
Жыл бұрын
We do! When you check out select "shop pay"
I love lee valley tools, but I've put my veritas router plane up for sale and I'll be upgrading to a JKM. It looks like an improvement and I'm excited to try it out and support your hardwork Jon.
@katzmosestools
Жыл бұрын
Thank you my friend!
I ordered this the other day. My big hope/concern is the blade stays put. One reason I ordered this one (kinda embarrassing to admit) but it’s just pretty, plus the fence comes with it and it’s bigger than the LN.
Fine adjustment is a GREAT selling point.. I have a veritas router plane. I always struggle with the fine adjustment. Wonder if JKM router plane is compatible with Veritas blades.. Thanks!
@katzmosestools
Жыл бұрын
Yeah its so easy to adjust and works so well
@kaaona123
Жыл бұрын
I asked if it was compatible with Veritas blades as well on the last video and have not yet gotten an answer.
@katzmosestools
Жыл бұрын
@@kaaona123 forgot to check. I'll look this week
@kaaona123
Жыл бұрын
@@katzmosestools thanks
@katzmosestools
Жыл бұрын
@@kaaona123 they are compatible
This is a thing of beauty. Is the price going to increase after the pre-sale?
@katzmosestools
Жыл бұрын
Most likely
@Jonathan Katz-Moses .... where did you get that beautiful mallet? :)
@katzmosestools
Жыл бұрын
We're launching it in a few weeks!
Signed up for orders on this router fine but is the price such a big secret?
I have the Veritas Large Plane, I am curious as to what advantages this will have over it. I already ordered so Im sold, but what can this plane do that I can't do with my Veritas?
@katzmosestools
Жыл бұрын
Check out the launch video from last week
Is this the same Hongdui that sells through banggood? They seem to get good reviews but I’m always a bit suspect of mainland manufacturing.
@G0F15H
Жыл бұрын
They have the full capability of making exceptional products. The reason they are associated with poor quality is because most manufacturers outsource overseas to get something made cheap, therefore the materials, tolerances and quality control are all minimized to keep the per-unit cost as low as possible. It’s generally not the mainland’s fault for turning out an inferior product, it’s the domestic company’s fault for specifying an inferior product
Replacement blades?
I'd order one in a heart beat, if I didn't already have a Veritas with all of the accessories.
hi. will the KM Router-plane be reproduced ? Is shipping to germany possible ?
@katzmosestools
10 ай бұрын
Yes and yes. We have the KM17 Pro showing up in a couple weeks
@artiranmor
10 ай бұрын
🥰@@katzmosestools
how do you sharpen the irons on these things?
@G0F15H
Жыл бұрын
The blades are removable from below so it’s not much different than sharpening a chisel or hand plane blade
Was this a one time only product? Can’t find it on your store at all, just replacement blades 😳
@katzmosestools
8 ай бұрын
Launching the KM 17 pro on Sunday 10/8!
Which one came first? This one or the Veritas one which looks identical?
@HopeStreetWoodworks
Жыл бұрын
Veritas. This is just a Chinese version with his name on it.
Me: Getting ready to suggest putting the half laps back to back for support and to make them the same depth. JKM: You could also position your hall laps like this…
@katzmosestools
Жыл бұрын
🤣🤩
I had a question. Where is this made? Anything that is made here in the U.S. I want to push and support in every way we can, and the adjustments this has it should definitely go to the top of the list for sure! Thanks
@merchantbankers
Жыл бұрын
China. I'm sure it's very well made, but this was a big factor in why I bought the Veritas router plane (made in Canada) instead. And Lee Valley's excellent customer service / return policies.
Are you guna be adding extra cutters for your router plane. I’ve been wanting to buy a router plane for a while now. I heard you were coming out with one so I waited. I don’t have much money but when I purchase a tool I make sure n purchase quality tools. I really like the features of your router plane but I like that veritas has extra cutters. I don’t want to buy the wrong one and be sorry becuz I can only afford one
Send one to Rob Cosman :D The hand tool guru. If he says it is nice, you have set foot in the market.
@michaelmcglynn968
Жыл бұрын
Cosman too busy spruiking his own planes 😂
I ordered from KM Tools and never received my order. I've used website help and email multi times and never received response. I have not located a phone number to call for inquiry.
@jeffestep7762
Жыл бұрын
Any update?
@cherylnees9739
Жыл бұрын
@@jeffestep7762 Thanks for asking. I forgot to update. I did receive several emails in response. Apparently an informational email about status of plainer delay was sent out but I never received that email. Because one item delayed all my order was delayed. I did receive my partial order. I needed it for a Christmas present. I was given the option of paying extra to expedite shipping which I did but due to bad weather did not receive in time. The irony is that the backordered plainer arrived three days later. Everything ordered in good condition and tho given late was a huge surprise and appreciated.
This looks like a really cool router plane...but is the date on the website right? or did I just read it wrong: "6-10 weeks from 9/26". Does that really mean 6-10 weeks from Sept 2026? Or was it supposed to say Sept 2023?
@katzmosestools
Жыл бұрын
No that’s old from the September release. I’ll change it. They’re in stock but fyi we are about to run out for a few weeks
I was excited about this plane and immediately ordered it on January 12. My CC was charged the next day, January 13. It is now the 23rd and the order still has not shipped. What’s going on here Jonathan? You’ve had my money for 10 days, where’s my product?
@leroy5007
6 ай бұрын
How long did it take to receive your router?
@jeffestep7762
6 ай бұрын
@@leroy5007 I think it ended up taking a month. Nice planer and I’m happy with it. Happy to support Jonathan and his business, so I should have had a bit more patience instead of expecting Amazon behemoth monopoly. I much rather support the little guy.
Sold out ?
Katz mosses shop
nice video....but dude, Egg-sits are for hens, its EX-it lol
Great advice and tool. At some times the camera was moving around quite a bit and it started to trigger motion sickness. Hard to follow precise movements when camera is floating.
Tool-phobic? I’m more of a not-enough-tool-phobic person.
Hand plane phobic. How dare you.