Thank you! My little mower wouldn't run and I knew the repair shop would put a new carb on it and make me wait three weeks. This video gave me the right info to clean the clogged jets and get to mowing right away! Thanks again!!

Ummm I literally just fixed my mower after watching this a few times. You saved the day!!! Thank you!!!!!

Thank you so much!!!That is unbelievable, but i did it, because of you! I can’t express how much I appreciate you, Great Man, because you so generous to give your time and knowledge to us! Thousand times thank you !!!

Thank you so much!!! That is unbelievable, but I did it, because of you, Great Man.I can’t express my appreciation to your time and generous

I just wanted to give you a shout out for your video helping me clean out the carburetor on my 10 year old JS36. I had symptoms where the lawnmower starts fine, but during the mow has a tendency to sputter out requiring me to push down on the handle to lift the lawnmower carriage enough for things to keep going, and it was getting worse and worse. My process was a little more involved with an extra spring and bolt compared to the video, but not too bad. I had considerably more dark specks in the fuel that came out compared to your video. I used the drill bit like you said for the main nozzle, but for the bolt holding the careburetor cover, all of my drill bits were too large, so I used a dental brush version of toothpick which worked for me. Only scare was when the float valve and pin came apart as I was using a plastic wirebrush to clean the grass crud on the exterior, but thankfully it was only three pieces to put back together and there was only one way that made sense. I put things back together, and with one pull the lawnmower felt like it sprang to life. Haven't given the JS36 a full mow yet, but based how it started I think I'm in great shape again, hoping to push the lawnmower another 10 years at least. Cheers for the video!

Thanks so much for this video! I was able to follow this video and my lawnmower ran like it was new! You are the best!!!!

@jrfix2732

3 жыл бұрын

You bet! Happy mowin’

My friend. I used your video to take apart and clean my 20-year-old Deere push mower. (I had already changed the oil, and replaced the plug and air filter.) I also used carburetor cleaner on the outside moving parts. Dude, my mower hasn't run this well in years. I feel like such an adult. Thank you!

@jrfix2732

4 жыл бұрын

You’re welcome! I love the sound when something doesn’t run well then gets fixed! It’s music to ones ears! 😊

Well I fixed my mower after watching this. Thx u

Great advice, thanks!

Thank you for the video gave me confidence

You didn't put the clamp back on the fuel hose

That was a great help. John Deere JA65, very old. I think the problem was the small hole through the bolt (not the ones through the side). After I got something small enough to go through all the way I put it back together. A few primes and it started on the first pull (a few days ago after maybe 50 plus pulls it wouldn't start at all). Thanks.

@jrfix2732

4 жыл бұрын

I’m glad the video helped. Yeah sometimes it depends which hole. Glad you got it going good again.

Good job! I use non-e gas in my small engines. Seems to help them run better.

@jrfix2732

3 жыл бұрын

Yes definitely in weed eaters and blowers! Older small engines should only be non-ethanol too. Not so important with bigger mowers though.

Do they all kust have the briggs and Stratton

The gasket between the air cleaner/Primer plate and the carb is to make seal so the primer can draw fuel..it is a necessary part of the system..FYI

If i need to replace the carburetor where can i get this part

Hello. I have a John Deere JS46 self propelled. I would like to know if it's similar in cleaning the carburetor as my lawnmower doesn't have a primer button.

@chanwu89

4 жыл бұрын

Georgi Santiago My JD doesn’t have a primer and I followed the vid to clean its carb.

Ours starts but when you engage the self propel bar, it cuts out and tries to quit. What causes that?

@jrfix2732

2 жыл бұрын

Check the belt that runs to the tires, it might be jammed or the pulley could be seized

Hi I put a carburetor on but my mower still does not start. Why should I try next?

@jrfix2732

2 жыл бұрын

Make sure you’re getting spark. And good compression. Make sure the gas is all fresh.

What engine manufacturer made the engine for the mower Sir ?? Briggs and Stratton ??

@jrfix2732

Ай бұрын

Yes I believe so.

@victoryfirst2878

Ай бұрын

@@jrfix2732 Thanks

What size it that drill bit?

@jrfix2732

Ай бұрын

It’s very tiny. Several places sell a kit for like $10 of multiple tiny ones. Like 1/16th and smaller