John Deere 62C Driveshaft Repair Part 3
Автокөліктер мен көлік құралдары
In part 3, I take the coupler apart which was a real challenge. Clean it up and reassemble. Show how to test the U joints and explain the type of grease for them.
In part 3, I take the coupler apart which was a real challenge. Clean it up and reassemble. Show how to test the U joints and explain the type of grease for them.
Пікірлер: 6
Used CLP gun cleaners on the coupler to help break it free from the tractor. Spray it on with the small tube and it work it. If you pull back on mine and turn the ring about three times, it will stay locked back in place.
@gotdeeres
2 жыл бұрын
I have some CLP on my shelf. Never thoght to try it on a coupler.
Great video on cleaning drive shafts, could you do one on changing out universals on drive shafts? I would also like to know if it is to replace the universals on the drive shaft on the X700 series, Deere only sells the whole shaft at about $350.00. I have a John Deere X758 with 1400 hrs.
@gotdeeres
10 ай бұрын
I have changed universal bearings and it is not that difficult. I will make a video next time I change one.
Do you know the napa # to use for the am131981 ujoint ?. X758 - 60" High Capacity Mower Deck.  3-7
@gotdeeres
10 ай бұрын
The Napa number is P861. That part is used on MANY JD models.