this guy deserves way more popularity considering how good he is at what he is is doing
@clementsmallengine4833
Ай бұрын
Wow a good comment! Far and few of them these days! 💪
@RandyParsons-wq1if6 ай бұрын
Cut the music, could not even hear the machine run. I gotta say, not to be too critical, but there are several of us that could do without the repeated crude language
@clementsmallengine4833
6 ай бұрын
O... thats a great tip randy but why dont you apply that to the videos you create and ill just keep doing what i want.
@joemendyk9994
2 ай бұрын
At least you'll be doing it in silence on this end.....
@clementsmallengine4833
2 ай бұрын
Took the time to comment that? At least call me an asshole or something witty.
@lenkoscianski1800Ай бұрын
You do not need music but over all good
@edwardstephens247 Жыл бұрын
Great job!
@clementsmallengine4833
Жыл бұрын
Thanks man! 💪
@ronaldrubottomjr89808 ай бұрын
Helpful information
@tomschisler15455 ай бұрын
what does that re power kit cost? on second thought ; i will find it on line. Thanks for inspiring me to try to repower my JD 318
@gerlandkent6377 Жыл бұрын
Thank, you for you're video. / my, neighbor is got 2 of those older 318s jd tractors they both are just siting in the woods I, notice one of them is got duel wheels on the rear.
@clementsmallengine4833
Жыл бұрын
There cool "older" tractors and great work horses! Especially with modern repower kits available this job was super easy and so straight forward!
@Aerospace_Engineering_Noob Жыл бұрын
What are you going to do with the old engine?
@mackendw10 ай бұрын
RE: the mishmash of nuts...more than likely the case over the 30+ years since it was made, the owners replaced the nuts with whatever was found laying around at the time.
@jamesonwilliams8331 Жыл бұрын
Can you do a video on your pressure washer on demand? That thing is cool!
@clementsmallengine4833
Жыл бұрын
Yeah I could it's simple enough. It's just a China freight pressure washer mounted on the wall..
@ryanvalleyirrigation Жыл бұрын
What do you look for when buying a johndeere 318 tractor. I want to restore the ph18 engine in it but parts are not available to do it. I need parts to restore the mower deck and snowblower . But parts not available for it.
@clementsmallengine4833
Жыл бұрын
Just finding one that has a reasonable amount of hours (lower the better) as far as buying one. Used parts are all over the net eBay and market place is the go too imo.
@thebrucester882 ай бұрын
Any followup on how the repower is working?
@clementsmallengine4833
2 ай бұрын
Excellent! The machine was just in for a service and it operates perfectly 👌
@user-bt1fc1pd2n Жыл бұрын
Can you provide a link or info for this new engine that you put in please?
@clementsmallengine4833
Жыл бұрын
www.smallenginewarehouse.com/386447-JD318-B-R3
@user-bt1fc1pd2n
Жыл бұрын
@@clementsmallengine4833 Thank you. Great video. Just bought a 89 318 with 54" blade, replacement 48" deck and 42" tiller. No idea how to hook up the tiller yet. No content on youtube about actually hooking them up - lots of videos with them hooked up and tilling...I am sure I will figure it out.
@clementsmallengine4833
Жыл бұрын
@Matthew Hammar I have never hooked one up before myself but I know there are tons of john deere forums that restore them so I'm sure you could find the information fairly easily. Good luck with it! 💪
@richardsevier3806 ай бұрын
Waiting to see if hood fits
@clementsmallengine4833
6 ай бұрын
Fits perfectly
@ronaldayers9449 Жыл бұрын
I was waiting to see when the firewall was magically gonna find its way in there after you hooked everything back up including the drive shaft….😏😂 I see if magically did.
@clementsmallengine4833
Жыл бұрын
I don't half ass anything I whole ass it!!! 🤣🤣🤣💀
@johnbrown6189 Жыл бұрын
Don't worry, soon all things will be made offshore and will all be metric cause America is the only place left where imperial is used.
@TheOzthewiz
4 ай бұрын
Yes! We always seem to lag BEHIND the rest of the World. Metric is SO much easier to use for measurements. The scientific community has been "metric" since the dark ages!
@TheShadeTreeFixitMan2 ай бұрын
You lost me with the foul language.
@clementsmallengine4833
2 ай бұрын
Im so sorry.... did it hurt your feelings?
@joe-ix1pm Жыл бұрын
Made it 3 minutes....
@clementsmallengine4833
Жыл бұрын
That's funny I looked at your non existent videos and made it ZERO minutes in... go play in traffic
Пікірлер: 36
this guy deserves way more popularity considering how good he is at what he is is doing
@clementsmallengine4833
Ай бұрын
Wow a good comment! Far and few of them these days! 💪
Cut the music, could not even hear the machine run. I gotta say, not to be too critical, but there are several of us that could do without the repeated crude language
@clementsmallengine4833
6 ай бұрын
O... thats a great tip randy but why dont you apply that to the videos you create and ill just keep doing what i want.
@joemendyk9994
2 ай бұрын
At least you'll be doing it in silence on this end.....
@clementsmallengine4833
2 ай бұрын
Took the time to comment that? At least call me an asshole or something witty.
You do not need music but over all good
Great job!
@clementsmallengine4833
Жыл бұрын
Thanks man! 💪
Helpful information
what does that re power kit cost? on second thought ; i will find it on line. Thanks for inspiring me to try to repower my JD 318
Thank, you for you're video. / my, neighbor is got 2 of those older 318s jd tractors they both are just siting in the woods I, notice one of them is got duel wheels on the rear.
@clementsmallengine4833
Жыл бұрын
There cool "older" tractors and great work horses! Especially with modern repower kits available this job was super easy and so straight forward!
What are you going to do with the old engine?
RE: the mishmash of nuts...more than likely the case over the 30+ years since it was made, the owners replaced the nuts with whatever was found laying around at the time.
Can you do a video on your pressure washer on demand? That thing is cool!
@clementsmallengine4833
Жыл бұрын
Yeah I could it's simple enough. It's just a China freight pressure washer mounted on the wall..
What do you look for when buying a johndeere 318 tractor. I want to restore the ph18 engine in it but parts are not available to do it. I need parts to restore the mower deck and snowblower . But parts not available for it.
@clementsmallengine4833
Жыл бұрын
Just finding one that has a reasonable amount of hours (lower the better) as far as buying one. Used parts are all over the net eBay and market place is the go too imo.
Any followup on how the repower is working?
@clementsmallengine4833
2 ай бұрын
Excellent! The machine was just in for a service and it operates perfectly 👌
Can you provide a link or info for this new engine that you put in please?
@clementsmallengine4833
Жыл бұрын
www.smallenginewarehouse.com/386447-JD318-B-R3
@user-bt1fc1pd2n
Жыл бұрын
@@clementsmallengine4833 Thank you. Great video. Just bought a 89 318 with 54" blade, replacement 48" deck and 42" tiller. No idea how to hook up the tiller yet. No content on youtube about actually hooking them up - lots of videos with them hooked up and tilling...I am sure I will figure it out.
@clementsmallengine4833
Жыл бұрын
@Matthew Hammar I have never hooked one up before myself but I know there are tons of john deere forums that restore them so I'm sure you could find the information fairly easily. Good luck with it! 💪
Waiting to see if hood fits
@clementsmallengine4833
6 ай бұрын
Fits perfectly
I was waiting to see when the firewall was magically gonna find its way in there after you hooked everything back up including the drive shaft….😏😂 I see if magically did.
@clementsmallengine4833
Жыл бұрын
I don't half ass anything I whole ass it!!! 🤣🤣🤣💀
Don't worry, soon all things will be made offshore and will all be metric cause America is the only place left where imperial is used.
@TheOzthewiz
4 ай бұрын
Yes! We always seem to lag BEHIND the rest of the World. Metric is SO much easier to use for measurements. The scientific community has been "metric" since the dark ages!
You lost me with the foul language.
@clementsmallengine4833
2 ай бұрын
Im so sorry.... did it hurt your feelings?
Made it 3 minutes....
@clementsmallengine4833
Жыл бұрын
That's funny I looked at your non existent videos and made it ZERO minutes in... go play in traffic