As a fellow tractor enthusiast, this is great content. Awesome video

@BundyBearsShed

Жыл бұрын

Glad you enjoyed it!

Thank you so much! This has helped me with a problem that I have had with my family traktor for years.

@BundyBearsShed

Жыл бұрын

You're welcome!

Very Good Instructional stuff mate. Good to see someone Still Knows the importance of a Test Light 👍

@BundyBearsShed

3 жыл бұрын

Glad you enjoyed it

I followed your video step by step and fixed same issue on JD 2955. Great video. Thanks for posting.

@BundyBearsShed

3 жыл бұрын

Glad it helped

Thank you so much for posting this very helpful video. I really appreciate your way of explaining concepts/principles. My 2155 was stuck with the MFWD on. While the parts manual says it should have had pretty much the same solenoid as the one you showed in the video, someone had replaced it with another model. But because you explained things so well, I was able to get it working. Thanks again, and please keep up the great work!

@BundyBearsShed

Жыл бұрын

Glad it was helpful!

I love your channel , easy to follow and helpfull. Greetings from the Netherlands

@BundyBearsShed

2 жыл бұрын

Awesome, thank you!

Thanks Lance..this is very useful for me..another great video..keep safe..

@BundyBearsShed

3 жыл бұрын

Glad you enjoyed it

Great video, discovered mine when I was out woodsin, branch removed my wires for me, dug around and found that solenoid.

@BundyBearsShed

3 жыл бұрын

Good stuff!

This video is so helpful to me, thanks for doing it.

@BundyBearsShed

Жыл бұрын

Glad it was helpful!

Hey Mr Lance , I have just started watching your videos and they are great. I am from North Carolina and it seems good to see a mechanic not a parts changer. Uncle Lee Peedin sends his regards

@BundyBearsShed

3 жыл бұрын

Thanks for watching! I like to watch Lee he does some interesting stuff.

@mariotyler3898

2 жыл бұрын

sorry to be so offtopic but does someone know a method to get back into an Instagram account? I was stupid lost the account password. I would appreciate any help you can offer me!

@dashmarcellus8610

2 жыл бұрын

@Mario Tyler Instablaster ;)

@mariotyler3898

2 жыл бұрын

@Dash Marcellus thanks so much for your reply. I got to the site thru google and I'm waiting for the hacking stuff now. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

@mariotyler3898

2 жыл бұрын

@Dash Marcellus It worked and I actually got access to my account again. I am so happy:D Thanks so much, you saved my account !

Good job explaining

@BundyBearsShed

3 жыл бұрын

Glad you liked it

John Deere does have a nice parts breakdown on their website. Massey Ferguson on the other hand does not. Unfortunately. Great video Lance, Keep smiling.

@BundyBearsShed

3 жыл бұрын

They do for sure.

Good info for those that have the 4 wheel drive john deere utility tractors, mine is stuck in 2 wheel, unfortunately thats the way it was built 😉 It would be nice to have but a lot of work to change it especially as its a highcrop, I don't think its possible unless I made it fixed hight.

@BundyBearsShed

3 жыл бұрын

It would be a big job alright, probably cheaper to upgrade the tractor

Great information thanks heaps

@BundyBearsShed

3 жыл бұрын

Glad it was helpful!

Hi Bundy, do you have a video explaining how the turtle/ rabbit gear works and when to use it on the 40 series

@BundyBearsShed

7 ай бұрын

I have one on the Hi/lo repairs but not how to use it. Look in the JD1640 playlist.

Thanks a bunch for posting this!! I have a 2240 that is stuck in 2wd. This video helped give me the confidence to get in there and check things out. My hope is that the piston is stuck and not allowing it to default. I am getting power to the solenoid and will run through your steps to test it's working. Fingers crossed it's not the clutch. Any advice for additional diagnosis if the solenoid and piston a re working?

@BundyBearsShed

3 жыл бұрын

It os often just the little piston in the valve so well worth a look.

Thank You

@BundyBearsShed

9 ай бұрын

You're welcome

Very helpful lesson. Thanks. I hope that kind of spider, walking underneath the hydraulic pipe, isn't poisonous?

@BundyBearsShed

3 жыл бұрын

Not that I know of

good job well done //// i am think as a brick but i got this one

@BundyBearsShed

3 жыл бұрын

Good stuff.

Sorted 👍

@BundyBearsShed

3 жыл бұрын

Yep done.

👏👏

@BundyBearsShed

Жыл бұрын

Thanks

Very good information. What the reason for the third contact? JD 2140 Greetings from Germany.

@BundyBearsShed

3 жыл бұрын

Must be for another setup. Im not sure really.

My tractor is in 2wd and will not go into 4wd I’ve done everything you have done to diagnose the issue. I’ve bench tested the solenoid and it is not clicking/moving the piston. When I put power to it though the magnetic part works. Would this suggest the solenoid is faulty or not ? Thank you for making this video as it has helped me a great deal!

@BundyBearsShed

2 жыл бұрын

Yes you can pull the valve apart and clean it up and get it working again easily.

@MTSswitch

2 жыл бұрын

@@BundyBearsShed I’ve cleaned the piston and the valve and they slide fine. It’s more the solenoid is not clicking the piston. Is there another spring that should push the piston ?

Hi Lance, do you know about hydraulic 4wd on 2130, my electrical is bad and needs to be rewired, any ideas, cheers, Shalen

@BundyBearsShed

3 жыл бұрын

I think I have a manual but Im away on holidays for a couple more weeks yet.

So if I have no hydraulic pressure at that port after replacing the solenoid and spool valve. All the hydraulics work good on my 2355. Still 4wd is locked in.

@BundyBearsShed

2 жыл бұрын

If the pressure can be seen to rise and fall the solenoid is good and it can possibly be worn sealing rings on the shaft that takes the oil to the clutch pack.

@ram_diesel_power6039

2 жыл бұрын

@@BundyBearsShed no pressure at all. I followed your video exactly. Before I replaced solenoid there was no oil coming out of port. After I replaced it plenty of oil. No pressure at all using a gauge.

Does anyone managed to take apart those two main parts from 26:30 numerotated with 6 and 10 because they seemed like one single piece. We need to open that casing in order to clean the piston and to check the spring. Thank you very much!

@BundyBearsShed

3 жыл бұрын

I just had a thought, there is not a plug at one end on yours?

Hello, please tell me how many times the pressure of the front pump of Jandir 2130 is

@BundyBearsShed

Жыл бұрын

2350 PSI

I got power to the vale...its magnetic...i can hear hím "clicking" but stil on 4x4 what' s the next to do!?

@BundyBearsShed

4 ай бұрын

Pul the valve apart the tint shuttle inside may be sticky.

@gellerthkeszeg5446

4 ай бұрын

@@BundyBearsShed i don t know how, my n is difrent model. I have a JD 3040 from 85'

not bad for an old fart

@BundyBearsShed

3 жыл бұрын

Im onto it eh, lol.