JL Audio Amp Rack!
Автокөліктер мен көлік құралдары
Check out the previous build here: • Car Audio Amp Rack Ins...
Helpful links* to items used in the video:
JP23 amp: lddy.no/1iou8
4-Channel Amps: lddy.no/1gotk
MiniDSP: parts-express.sjv.io/3PD91A
Gripper Push Block: amzn.to/4ayuz89
Scratch and Dent Deals: howl.me/cl2NO9zHqPO
JL Amp: howl.me/cl2NOnENwa2
ABS Sheet: amzn.to/3xF5Bpa
Power Wire: lddy.no/1iou6
Screw Assortment: amzn.to/4ayD3w2
Fuse Holders: amzn.to/4aLx0nG
In this video I show you how to fabricate a car audio and amp rack to hold a DSP, a JP 23 subwoofer amp PLUS an 8 channel JL Audio XD800/8. The goal is to fight a TON of audio gear into a tight space.
Join this channel to get access to exclusive membership perks:
/ @diyaudioguy
If you found this video helpful then you can support the channel on Patreon for as little as $3 a month: / diyaudioguy
Exclusive Discount Codes for DIY Audio Guy fans:
7% off of Savard (www.savardspeakersystems.com/...) with the code DIYAUDIO
10% off of Custom Speaker Pods (customspeakerpods.com/) with the code DIYAG
5% off from Battery Hookup (batteryhookup.com) with the code DIYAudio
5% off at Parts Express (parts-express.sjv.io/3PGnNr) with the Code DIY5
10% off at Jag35 (jag35.com/DIYaudio) with the code DIYAUDIO
Check out the DIY Auido Guy Amazon Store:
Amazon: www.amazon.com/shop/diyaudioguy
Support DIY audio content by shopping with these affiliates:
Shop for Basshead Gear at Down4Sound: lddy.no/1065t
Shop for Car and Home Audio at Crutchfield: howl.me/cg9bCOKLoK7
DIY Audio Merch: my-store-b3f136.creator-sprin...
Funny Car Audio T-Shirts: maxxpoweraudio.com
Connect on social media:
Facebook: / diy-audio-guy-11142806...
Instagram: / diyaudioguy
Twitter: / diyaudioguy1
Chapters:
0:00 Introduction
Music By creatormix.com
*As an associate/affiliate marketer I may earn a small commission on qualified purchases on Amazon, Crutchfield, Parts Express, Sonic Electronix, NVX, customspeakerpods.com, Arylic, Savard or Down4Sound.
#affiliate #crutchfieldpartner #amazonaffiliate
Пікірлер: 66
Check out the previous build here: kzread.info/dash/bejne/a31-0pWhe7u2is4.htmlsi=h5I1Z4rVXSMOYmhW
I like the concept of a clean build that is still budget minded.
@DIYAudioGuy
3 ай бұрын
Pretty much blew the budget on the amp and the DSP.
@JasonWW2000
3 ай бұрын
@@DIYAudioGuy You'll be thanking yourself later on. 👍
@eustahijelifetips
3 ай бұрын
But you bought it once and now you should be fine for a longer period of time, better to get a futureproof system than always upgrading something @@DIYAudioGuy
@potatoe1bread358
3 ай бұрын
that's what I'm aiming for since I'm in highschool lol
You can buy threaded inserts that can be melted into the plastic. They are pretty fantastic. You basically mount them onto the solder iron let it heat up and press it in.
@DIYAudioGuy
3 ай бұрын
I'll have to give those a look!
That turned out really nice... Well done!
@DIYAudioGuy
3 ай бұрын
Thanks!
The JL amps are super clean, you won’t be disappointed.
@DIYAudioGuy
3 ай бұрын
I hope so!
Nice work and set up
@DIYAudioGuy
3 ай бұрын
Thanks 👍
Now everyone sees why most people in the car audio field buys suv’s. Just easier to remove rear seats and have plenty of space to work with
Oh man I like those square terminals on the JL amp!! I bet they're much easier to get wire into than the usual round terminals.
@DIYAudioGuy
3 ай бұрын
I thought that was interesting, not something I'd ever seen before.
@KGrasso89
2 ай бұрын
@@DIYAudioGuy Me either, do you like the square terminals?
That's wild! I have the same two amplifiers in my system. They seem to be perfect and for their size and offer very good power density.
@DIYAudioGuy
3 ай бұрын
What are the odds?
Very clean! And definitely makes me want to try my hand at some ABS fabrication
@DIYAudioGuy
3 ай бұрын
You should!
Dude your installs always mint. Great job
@DIYAudioGuy
3 ай бұрын
I've definitely gotten a better over the years, but I have a lot of room to improve.
I like the spacing. Great job!
@DIYAudioGuy
3 ай бұрын
Thanks!
CE Auto Electric Supply has a remote relay system with a 6 amp diode. I bought one myself to power on 10 units, which had no issues.
@DIYAudioGuy
3 ай бұрын
Cool.
That was a really clean amp rack setup. Be sure to submit that to the 12v Clean Wire Club! 💪🏽
@DIYAudioGuy
3 ай бұрын
I think I will!
Its overwhelming trying to figure out where to place components and how to mount them in a truck. I have the same problem with my 2011 sierra extended cab. To add insult to injury the floor has a lot of strange contours to it and there is only 1 tiny flat area on each side. I would remove that cup holder in your truck and cut the bracket right off and save it in case you want to put it back.
@DIYAudioGuy
3 ай бұрын
It is a challenge.
If only someone made a wire ruler to space out zip ties perfectly...oh wait Dean already makes the D Wire Ruler 😊
Nice job!!! Looks great!!!!
@DIYAudioGuy
3 ай бұрын
Thanks!
@DIYAudioGuy
3 ай бұрын
Thanks
Keeping it clean
Looks good.
Justin great video 📸
Trinity audio makes an 8 channel amplifier for $325. 4 channels are stronger than the other 4. Supposedly for running tweeters and mids or something.
i like the fuse that u use i wanna buy ones like them
@DIYAudioGuy
3 ай бұрын
I think I put a link to the fuse holder in the video description, they even come with fuses.
I have a gen 4 RAM 1500; I fit a JP4300, a large and small Hertz 4 channel amp, Audiocontrol 810 DSP, SMD 6 spot fuse holder and 4 spot ground distro all on the back wall. Not sure where you had issues, but would be happy to send you pics if you’re interested in layout ideas.
Ughhh JL but understand upgrading to an 8ch amp and saving a few bucks via scratch n dent so it can slide. So far the rack, placement, and wire management look great! 👍
@DIYAudioGuy
3 ай бұрын
Thanks!
That looks pretty good. I think I would have permanently removed that cup holder. Even if I had to cut it out with an angle grinder and a cut-off disc. Lol. The only thing I would have done different is to use tinned copper lugs instead of bare copper. The bare copper tends to oxidize over time and you lose some electrical contact. Are you going to add another piece of wood across the front to cover the top of the amp rack? That would give you some extra protection as well as hide your equipment. You'd be able to toss anything in the back and not worry about it hitting and scratching something.
@JasonWW2000
3 ай бұрын
Is your battery going under the fuse blocks?
@DIYAudioGuy
3 ай бұрын
It is off to the side.
Did you say the cup holder is welded to the floor? Clean setup. I can see how the old one was causing issues. Space wise
@DIYAudioGuy
3 ай бұрын
Yes, there's a metal bracket that's welded to the floor, and the plastic cup holder sits in that bracket.
What was that tool you used to cut the power cable insulation?
Justin i don't have a router table but do have a hand held router. You think i could mount my abs amp rack to a table with clamps . Clamp a jig guide and then use hand router to do round overs along the rack ?
@DIYAudioGuy
3 ай бұрын
For a thicker material, like 3/4-in MDF, yes. But you're probably working with 1/4-in ABS. The trick is making sure that you're making a safe cut. You'll need to make sure the ABS is supported, it's so thin that it will be easy to bend. Clamp it right to the edge of the work surface so that the router bearing is on the work surface.
Audiocontrol DM810 would've taken place of the DSP and the 8ch amplifier, but it's definitely not cheap.
@DIYAudioGuy
3 ай бұрын
This one? howl.me/cl20ZzF98Ua
@boominS10
3 ай бұрын
@DIYAudioGuy yea I was thinkingbthat was the 1 with built in amp but it's not. I was thinking of the 6.1200 it's a full DSP with the amp built in and can daisy chain to other amps while controlling the signal to them as well. I was thinking they had an 8ch version.
That’s what she said
Why not get a suv I think it would be better for you
@DIYAudioGuy
3 ай бұрын
Money doesn't grow on trees.
@BrianWaller-qe7gr
3 ай бұрын
Guess you haven’t checked with car prices lately
See Soundman and Car audio fabrication this is how you do a build not 9 part's for a build.
@DIYAudioGuy
3 ай бұрын
🤣
@JasonWW2000
3 ай бұрын
I'm a little confused by your comment. What do you mean by nine parts for a build?
@JasonWW2000
3 ай бұрын
Are you saying he should have stretched out this amp rack build like Mark and Doug, instead of doing it all in one video?
@dextermorgan1
3 ай бұрын
@@JasonWW2000No. OP is saying he's glad he didn't stretch it out.
@JasonWW2000
3 ай бұрын
Oh, the OP left out all the punctuation. I think this is what he meant: "See, Soundman and Car Audio Fabrication. This is how you do a build. Not 9 parts for a build."