JETTING HOSE SIZE COMPARISONS: 1/4", 3/8", 1/2", & 5/8" - "GET" JETTING with JONESIE
Jonesie discusses Jetting Hose sizes 1/4", 3/8", 1/2", & 5/8", covering their optimal GPM/flow rates and best application in Service Jetting
FYI stuff:
Hose-sizes are determined by its INSIDE-diameter ("I.D.") NOT its outside-diameter ("O.D.")
1/4-inch = 0.25" I.D.
3/8-inch = 0.38" I.D.
1/2-inch = 0.50" I.D.
5/8-inch = 0.63" I.D.
"Get" Jetting!
#jetter #brutejetter #trailer #trailerjetter #brute #jetter #jettersnorthwest #seattlepump #jnw #hydrojetting #vanpackjetter #mountablejetter #skidjetter #getjettingwithjonesie #chrisjettersnw #eagle200 #eagle300 #draincleaning #drainjetting #sewercleaning #hydrojetting #wirelessremotejetting #jettersnorthwest #northwestjetters #getjetting #warthognozzle #jnw #sewerroots #warthognozzle #reapernozzle #rootrangernozzle, #penetratornozzle #getjetting
Пікірлер: 15
Short n informative 👍
so when I want buy a new 1/4" jetting hose for replacement , flexible one is good or stiff one is good?
@JETTERSnorthwest
2 жыл бұрын
Sorry we missed your comment!! Flexible is typically best, but sometimes it depends on the pipe-size; if you are primarily jetting 3" and smaller then flexibility is very helpful to get thru turns in the line; but if primarily jetting 4" and larger then a stiff hose holds center better in larger lines
Does 5/16” hose is enough for 4gpm 4000psi machine or I need 3/8” pressure hose?
@JETTERSnorthwest
2 жыл бұрын
4gpm typically cant pull 3/8" hose much more that 100 feet unless conditions are perfect and the Nozzle is really built for thrust. I recommend 5/16"(.31") or 1/4"(.25") for 4gpm, depending on the jetter's PSI rating and the pipe-size to be cleaned :)
@Kris9464
2 жыл бұрын
@@JETTERSnorthwest Im using this machine to surface clean flat surfaces and im getting so much vibrations on hoses that im considering going to 3/8 hoses. Im using 5/16 right now lenght usually 100-160ft and I feel like my pump is stopped by this thin hose. Am I right or stepping up to 3/8 hoses dont do much about this fact and I should stay with 5/16?
can you use a 1/4 hose on a 4inch sewer drain that has grease in it?
@JETTERSnorthwest
2 жыл бұрын
So sorry we missed your comment!! Yes many contractors use 1/4" jet-hose in grease-laden 4-inch pipe, but if your jetter does 5-GPM or more you will get much better cleaning results from a larger Jet-Hose and larger nozzle that is set for your jetter's GPM/PSI rating
@billw.3557
Жыл бұрын
@@JETTERSnorthwest using a 1/4" jetting hose what nozzle hole is required for 2.8 gpm? I don't want to damage my gas powered pressure washer pump. Thanks
audio not clear
@JETTERSnorthwest
2 жыл бұрын
Sorry about the audio - we now use much better microphones
Office address please
@JETTERSnorthwest
Жыл бұрын
JETTERS NORTHWEST 16750 Redmond-Woodinville Rd NE, #C-101 Woodinville WA 98072
Hey get a microphone Idk what ur saying
@JETTERSnorthwest
2 жыл бұрын
Yep we've got one since then ;-) We shot that vid about 5 years ago