Jet Boat some rapids on the Main Salmon River

Спорт

Jet boat some rapids on the Main Salmon River with flow 40K CFS White Bird and 5.3 on the Corn Creek ramp. Included is the new Sapp Creek rapid, which has a steeper final climb at higher flows.
Some finesse in Bailey rapid: climb onto a wave, then let off on the throttle and slide backwards/sideways down the wave. The diagonal waves terminate smoothly in the central green water, so this technique prevents bashing over waves. But... it requires a lot of power to get moving again.

Пікірлер: 12

  • @rstrome5864
    @rstrome58642 ай бұрын

    Great video and navigating. I need to learn how to read the water better before I would ever attempt those waters.

  • @idahoviking

    @idahoviking

    2 ай бұрын

    The water is high, so the river is deep and wide. This is the best time to learn. I and others first ran this when we knew exactly zero about anything.

  • @voodoo8796
    @voodoo87962 ай бұрын

    At he 2 min mark how deep is that? Blows my mind if that is 40K CFS.

  • @idahoviking

    @idahoviking

    2 ай бұрын

    I don't have a depth gauge. But if the bank slope continues until the 2 sides meet, then we can say it's pretty darned deep.

  • @user-fz5cg4rr7c
    @user-fz5cg4rr7c2 ай бұрын

    Thanks. Do you know your deadrise? I went to HCM site, couldn’t find specifics. What length and engine?

  • @idahoviking

    @idahoviking

    2 ай бұрын

    21', 6 foot bottom, 11 degree, Kodiak 6.2DI, 212 with Solas 3.4 impeller. On this 21' boat, the bow begins to take shape 10 feet from the front. So the bow rise is very long and gradual, and is my preference. It tends to climb up waves, while more abrupt design bash into them. Although I do enjoy this configuration, I do not endorse any manufacturer.

  • @user-fz5cg4rr7c

    @user-fz5cg4rr7c

    2 ай бұрын

    Thanks again. Wish it was on their site. Last November I bought a boat from Guy’s Outdoors, Lewiston. It’s a Jim Bingham boat who worked at NW Jet for 35 years and then they decided no more inboards. He started Magnum Marine. Mine is exactly like yours but I’m not sure the deadrise, maybe 12 degree. Really like your videos. I want to do the same! Love to go out some time and run with you.

  • @user-fz5cg4rr7c

    @user-fz5cg4rr7c

    2 ай бұрын

    I forgot, did you get hydraulic reverse or go with the cable. I’d like to get hydraulic down the road.

  • @idahoviking

    @idahoviking

    2 ай бұрын

    @@user-fz5cg4rr7c See Facebook group "Idaho Jet Boating". Runs are announced.

  • @idahoviking

    @idahoviking

    2 ай бұрын

    @@user-fz5cg4rr7c Cable. It took a while to sort this out. I ended up removing the "brake box." This is reasonable because I have a single lever control, so my hand is always attending both the throttle and bucket position on one lever. I feel zero need to modify this setup. It is very quick.

  • @user-fz5cg4rr7c
    @user-fz5cg4rr7c2 ай бұрын

    Is that your CW?

  • @idahoviking

    @idahoviking

    2 ай бұрын

    HCM. The CW could handle this too, but with less ability to diagonal the current w/o bow shear.

Келесі