there needs to be more videos like this since alot of people need this type of help, much respect for you my friend🙏

@FalconpevSg

Жыл бұрын

Thanks for the feedback!

THANK YOU SO MUCH IT WORKED! you are the only person on the internet that explains a proper fix. subscribed

you're the best! combination #4 was the one for me. i'm using a bldc driver that's designed for CNC spindle motors (which i'll eventually put into a waterproof enclosure), so i wasn't sure if the loud rattling was because it was the wrong type of driver, but you made it easy!

Thank you good sir. I'd tried swapping phase wires in all the combinations as other guides show, but your info on the hall wires was the piece of info I was missing. Got it all working now 👍😃

@FalconpevSg

2 жыл бұрын

Thank you glad we could help!

@tomt1871

2 жыл бұрын

Swapped 10x controllers into 8x. Front wheel turns backwards,Tried all combo s ,only one work but it overheated and burned the wiring. Tries the hall sensor swap but still running backwards

fixed my 72v 60amp setup with the swaping of the two hall sensor wires, though it was a different phaze wiring combination for me.it still worked so thanks for that 🤘

@FalconpevSg

2 жыл бұрын

Good stuff! let us know what other ideas you have

Videos like this are so helpful! Thanks!

@FalconpevSg

3 жыл бұрын

Thank you!

Holy fracking cow...dude thanks alot one of the combos made my motor run butter smooth....thanks alot¡!!!!!!!

Only video I could find with the same problem, mine ended up being that one on the blue wires was broken off , fixed it and back running. Thank you !!

@FalconpevSg

Жыл бұрын

Wow the whole tube and only our video could help you solve it?

This video has been so helpful. Thank you so much for posting it!!!

☺️ I'm one happy man 😁 I've been working on scooter for like a week now and the other thing was the wheel wasn't moving now I've seen your video it working now 😁😁👏👏 Thanks you so much 👍🍻

I loved your video, I still couldn't solve my problem but I still haven't touched the hall connection I'll check. however I am using a controller for 60v with a 60v battery also in a 48v motor I don't know if this is the problem, because they said that the voltage was not a problem. that's true? thanks

Man you are a LEGEND in 2023 you help me resolve the issue with my 60v Currus Panther as it wasn’t running smoothly so many Thanks Man and I left a like too😎

Thanks alot for the video I am going to try this with my motor tomorrow . I am sure this will be the fix. Thanks man!

@FalconpevSg

3 жыл бұрын

Let us know how it goes. It’s not always the case where the phase wires are the issue

@oliver-ce6zg

3 жыл бұрын

@@FalconpevSg this wasn’t the fix, i think it is something with the hall sensor because the motor acts the same way when the hall senor is plugged in and when it is plugged out. Thanks for the reply

Great explanation 👌 thank you

THANK YOU SO MUCH 👌👌👌 well explained

This guy is awesome it works you Just have to be Patience

Thanks bro, combination one worked for me

It worked for mine! Thank you! It was so noisy before, now it's silently normal! But the top speed got lessened. Any ideas why?

yooooO!!!!! you saved me man! So I bought a new controller which didnt have a "learning feature" (thats how my chinese seller call it) - my wheel was spinnning in the different direction. Combination 4th worked! thank you so much for your work! god bless you brother

@FalconpevSg

Жыл бұрын

Pls do help share

Thank you so much my scooter was juddering i done ALLcombos didnt stop juddering....then i put back to green green blue blue and yellow yellow and juddering stopped thanks again

This information is hard to come by, thank you for your help.

@FalconpevSg

3 жыл бұрын

Thanks for watching

@FalconpevSg - does this work on a zero 9? where do find these cables? thank you in advance

Nice job..thank you

Could you do a video how to change rear lights on Zero 11x? ja have issues, only 2 working and one of then its very week

Excellent, fixed it . thank you very much.

I have electric scooter i replaced controller but I don't know how to fix the dc to dc converter for light, horn,indicator brake light also no display on meter need help..

Thank you for this video got it first combo.

@FalconpevSg

2 жыл бұрын

glad it helped!

The second to last combo worked but the motor is running backwards. You show switching the hall wires when the wires are normal but how about when using the Blue-Yellow, Yellow-Green, and Green-Blue combo?

Thank you for this video.

@FalconpevSg

2 жыл бұрын

I’m glad it helped someone

Thank you. This solved my problem. Interestingly my motor worked with only two leads connected?

I have an soflow s06 with a custom controller, i have error e7, but its running and i think smoothly, i think the blue wire from the controller is loose than the otherones, i think it snapped of the controller, can u help me ?

amazing video, working now. but just continue with a problem I changed the cables the same way on the video as it is working but not fast enough. It looks like something is stopping to delivery more velocity)some jerky and noise at the beginning

My sealup q7 jerks when in gear 2 and 3. What is the solution? Can you help me please

My motor hub was working for 3 days and now won't move at all its a bafrang hub peddal assist just looking for answers why this has happened

Hi everyone. I got a jerky motor after a motor cable replacement, and none of these combinations seemed to work. What could be wrong? I need some answers as this is frustrating. Thanks!

Hey FALCON guys, would be great if you do a video showing how to invert motor turn sense, useful for example when user wants to install brakes at the other side from original setup, thanks!

My ebike was working properly then one day it started going backwards. Followed the instructions. Now its going forward. However when I changed the hall yellow and blue my SW900 display went out of wack. I am walking my bike and the SW900 register 19MPH speed. How can I correct that.

Is this applicable to any brand or unit of electric scooter?

I have the same fault i believe , my front wheel motor just sputters like its in a lock state or something it doesnt want to run smoothly like before i dont know what happen , only after i dismantled the bike and then put all back together that fault showed up .. im gonna try like you did in this video ,, and also when i disconnect the ble wire from the blue wire in the air without no loae it spins smoothly and fast , but when i put the tires on the floor with load it sputters and doesnt spin

Hi sir mine is yyk 80a and my motor is 52v dual phase how can i remove the vibration when i first star my bike thank you for the answer

@FalconpevSg

11 ай бұрын

Adjust your settings 80A might be too powerful.

Nice troubleshooting video, but honestly if I had this problem on what I am assuming would be a new scooter. I would promptly return it and exchange for one that is properly wired.

@FalconpevSg

3 жыл бұрын

This is actually more for upgrades of motor that we sell. You can actually get a stronger drive system and you need to do this to configure your high speed motor.

@DaveK84

3 жыл бұрын

@@FalconpevSg i see, that makes more sense.

I have kugoo m4 i changed the controller with original one works fine but make very loud voice what that will be

@FalconpevSg

6 ай бұрын

What kind of noise

been almost 2 months trying to figure out what happened and this was it, just unbelievable how simple it was, first phase wire change i did the motor worked fine i feel so dumb.

maybe theres more easer way to get it smooth/reverse? ie. opening motor lid and checking wiring there?

@FalconpevSg

2 жыл бұрын

This is the easiest way tbh

Hey my kaabo mantis 10 pro is droping power on and off when i accelerate,the battery seems ok i keeps charge can you suggest what may be the issue?

@FalconpevSg

2 ай бұрын

It’s battery issue. Your battery is Aging

I have janobike t85 2800wX2 today rear motor started to make burly sound and stopped working please help

@FalconpevSg

3 жыл бұрын

1. Check the motor wires are not melted or burnt 2. Check if there is any resistance in the motor

Omg,, thanks bro,, u awesome,,already subscribe ur channel.. tq

is the jerky or noisy problem normally shows up after some time of use? I didn't do upgrades so should I still try to change the combination when I got jerky motors after 1 year of use? Hoping for your reply, pls.

@FalconpevSg

2 жыл бұрын

no, this problem will arise when you change the motor. when you get jerkiness after one year of use, it is most likely due to wear and tear of the bearings

Will this work on and scooter or just the 10x

@FalconpevSg

5 ай бұрын

any scooter

@Trailfloater

5 ай бұрын

@@FalconpevSg thanks so much. So my motor is working but at times there is almost like a grinding sound then it goes away would this work for something like that or just if my motor isn’t working ? Thanks again for your time

Than you

its okay if 2 face wire only? my motor perfect work when i remove yellow face wire

@FalconpevSg

Жыл бұрын

The 2 phases may not be enough, have you tried riding on it?

Hello falcon , my e scooter can't run itself without pushing forward , what can i do to fix it? I have the kugoo kirin m5 pro

@FalconpevSg

8 ай бұрын

Change your settings in lcd to not use kickstart

@tambayph9729

8 ай бұрын

How to change it?

@FalconpevSg

8 ай бұрын

@@tambayph9729 go into lcd settings mode, how? You should know better than me

hi man i got a kT 36v Foc controller with an LCD screen G51 and wired it up to my scooter .. it rattles and in some combinations it doesnot get any speed. the seller tels me its more compatible with electric bycicle engine ....and not ans scooter motor .... is it true?

@FalconpevSg

19 күн бұрын

@@amirhoseinkargar3733 check if motor is compatible firstly. The controller might be for geared motor

@amirhoseinkargar3733

19 күн бұрын

@@FalconpevSg this is what company told me at last ... you mean its impossible to wire it up to a non-geard motor? isnt there any firmware update or changes that or even reprogramming to make it work for fancy scooter motors?

@FalconpevSg

19 күн бұрын

@@amirhoseinkargar3733 no it’s not possible to change from geared to non geared motor

Hi !! I just but Wolf King and everything is work good and after 20km the rear motor stop working and begin to bloc and jerking like in this vidéo?? Need help

@FalconpevSg

2 жыл бұрын

Something melted or burnt. Possible reasons: burnt hall sensor inside motor but unlikely. Burnt mosfet inside controller most likely

@davidworrall3653

2 жыл бұрын

@@FalconpevSg thanks i will return tje scooter i tink

@FalconpevSg

2 жыл бұрын

@@davidworrall3653 we would recommend a VSETT instead

@davidworrall3653

2 жыл бұрын

what is a vset instead?

@davidworrall3653

2 жыл бұрын

okok the brand off a scooter perfect

Why would my wires melt and the motor give out? Lose connection??? And would this help if I tried? It was working fine the entire summer... 😔

@derek488

2 жыл бұрын

Resistance causes that. Can be cause by connections that loosen up over time or corrosion between the connections. This wouldn't fix that.

@MarvelousYoUnAstro

2 жыл бұрын

What can fix this??? New computer???

@derek488

2 жыл бұрын

@@MarvelousYoUnAstro just new connectors

@MarvelousYoUnAstro

2 жыл бұрын

I'll try that and see... thanks brother!

Can u do a video for a Q30 I have the same problem I only had the scooter for one day

@FalconpevSg

2 жыл бұрын

Did you buy from us

@darkbloodgt6577

2 жыл бұрын

@@FalconpevSg daily sport direct

@FalconpevSg

2 жыл бұрын

@@darkbloodgt6577 so get daily sport direct to do the video for you?

@darkbloodgt6577

2 жыл бұрын

@@FalconpevSg dude I didn't ask u to do a video I only ask did they they have a video out on the brand of scooter but your rude ass can have a good day oh get you family to tell u have a good day

Bonsoir, si quelqu'un peu m'aider je recherche la notice pour ma trottinette électrique de marque honeywhale e5 pour paramétrer mon compteur NJAX-T. Merci....?

@christophedao994

3 жыл бұрын

Car, la notice n'est pas en français.

@FalconpevSg

3 жыл бұрын

@@christophedao994 sorry I don’t understand the question

My scooter runs but at times during start, the motor rattles, how can I solve this

My controller gets very hot 🔥 and motor not running smoothly..

@FalconpevSg

2 жыл бұрын

connection is wrong.

Can't you short the hub by changing wires like that?

@FalconpevSg

9 ай бұрын

No you won’t, you will only short it if you connect both wires of the same phase together

What to do when the engine is running but when I step on it it looses power going from 25km to 8km/h?

@FalconpevSg

6 ай бұрын

What do you mean step on it

@madsl88

6 ай бұрын

@@FalconpevSg as soon as I put my full body weight and try to ride. I don't exceed 80kg, it says up to 100.

My ebike motor make vibration when i reach at 25km/h what is the solution?

@FalconpevSg

Жыл бұрын

Check tires, check motor balancing and then check wire connection

Hello I have a Zero 11x and motors don't drive forward when using throttle, it very jerky and needs to be pushed to accelerate in the right direction, thoughts?

@FalconpevSg

Жыл бұрын

Controller burn

@aidenCBR94

Жыл бұрын

@@FalconpevSg it is brand new out of the box? Have only moved it few km, but was like this first ride

@FalconpevSg

Жыл бұрын

@@aidenCBR94 although the 11X motors are what we call sensorless, meaning they will be more jerky than motors with sensors, it shouldn’t be so jerky that you feel it. Where did you get it from

@aidenCBR94

Жыл бұрын

@@FalconpevSg I got it from IwheelEUstore on Ali express, I have already emailed them but no answer yet, wanted to ask your opinion, if I am on scooter and I try to accelerate, it will not go forward for 1 second it will jerk a bit backwards then start moving forward, really dangerous in traffic, only when I push with my foot does it go smoothly

Is this only for this scooter

@FalconpevSg

2 жыл бұрын

For any scooter

@darkbloodgt6577

2 жыл бұрын

@@FalconpevSg so this is why the M code is showing

I dont recommend to swap by place the PHASE wires. The wires on the load are geting hot at the connection piont and in cases starting to melt. The result can be a short in wires. (TESTED). In ignoring the wire melt - the controller at the same time is geting realy hot and in my test case it did automaticly switched off (protection). It was the ZHIPU controller wich are good made. Its the Mosfet fault - wich needs to be changed.

@FalconpevSg

Жыл бұрын

We use special connectors which can withstand up to 200A of over current

@Haiduk1985

Жыл бұрын

@@FalconpevSg The wires are getting hot and the orginal connection is the weakest point. Ok - you swap the connections, but still use the same wires. And if you have upgrated connections - you think the video excited viewers will?

@FalconpevSg

Жыл бұрын

@@Haiduk1985 you have your opinion and we respect it but I think we have the experience.

@Haiduk1985

Жыл бұрын

@@FalconpevSg Im talking of mine experience as a service tehnican in scooter workshop.

no explicate no to much .

@FalconpevSg

8 ай бұрын

??

@jorgeluisvazquez1975

8 ай бұрын

@@FalconpevSg i see other video explain much better more technical

@jorgeluisvazquez1975

8 ай бұрын

@@FalconpevSg nothing said to

@FalconpevSg

8 ай бұрын

ok so our video is no good? @@jorgeluisvazquez1975

i have a 36v 350w unbranded xiaomi looking scooter everything is good about the scooter just it has bad electrics.. i bought a complete new controller and al wires/brake/throttle/lights set off ebay the full guts for the scooter.. tonight i attached it all and when i press the throttle the motor wheel seems locked and makes a strong jiggering movement like it wants to move but its stuck..i wonder if this wires swapping trick is the solution.. i will have to try soon and see, thanks bro as i totally gave up i tried everything today i did it all right and i get 0 results :(

@FalconpevSg

Жыл бұрын

yes try it and let us know!

@ANGRYTRUMP2024

Жыл бұрын

@@FalconpevSg hi, so progress! the 3rd colour combo works..but.. the wheel only spins great at full power for 2 secs then stops.., i have the controller setup on bench with the wheel on a spare scooter frame upside down locked into the forks so i can see it spin .the controllers set to push start so i have to spin wheel by hand then press the throttle to see if it spins lol.. so i spin wheel and hit the throttle ..the wheel spins perfect for 2 secs then stops/cuts off.. is the wheel in reverse and its cutting off for safty?? also that final thing you did with the reverse signal wires.. do i need todo that as a last step so it spins other way and will be good?

@ANGRYTRUMP2024

Жыл бұрын

@@FalconpevSg also may i ask, when the motor does start spinning again and working.. do i return the wires back to their nowmal colours or leave them in that colour combo that works?

@FalconpevSg

Жыл бұрын

@@ANGRYTRUMP2024 just leave them

@ANGRYTRUMP2024

Жыл бұрын

@@FalconpevSg ok and i just did that reverse wire thing on the hall wires and its working!! THANK YOU!!