Nice video. Good to see a kindred spirit.

23:06 - I would make a template here and rotate it slightly one direction or the other to avoid drilling too close to the original rivet holes. Also, depending on how close the dimensions of the ebay module were to your stove, I would concentrate on the connector mounting bracket fabrication. That would give me a pan that is not already deteriorated away. This is one of the benefits of watching someone else struggle with a project is that you can come up with ideas of your own to make the repair. Thanks for posting.

Added to liked videos, funny that we have a Jenn Aire also and this will definitely come in handy for sure....

We have to say for home appliances huh, thank you for the share we use gas but thank you for sharing Lance & Patrick.

Happy Sunday Steve! Hope the brood is well!

My first and obvious problem is that this things is that it's very inefficient. Glass is a horrible conductor of heat so right away you're behind the 'heating' 8 ball. Induction is absolutely astounding when using cast iron though!

Good repair.

Also my burner is a regular burner insert. Model number c263b

You can use a pumice atone on the glass? Perferble from a mexican store. Not sure if it scratches glass, but it wont scratch metal. At least hasnt mine. They are hard to find depending were you live, and they are black

Can put a plastic receptacle, cus i got the wrong ones. Didn't know the receptacle was porcelain or ceramic.

Time for a new more efficient stove.

how did you pop out the cartridge? mine is all glass there is not a metal frame

@stevewatr

Жыл бұрын

Sounds loke you have a different model than mine.

Thanks for the video it was very helpful. Just as a question. Couldn't you have just moved the plug in the old range over to the newer range rather than going through all of that?

@stevewatr

3 жыл бұрын

It's been a while since I did this repair, but if i recall correctly, i think the metal pan was a little thicker on the new one.

@digquickly

3 жыл бұрын

That's right!, I do recall that. Thanks again for a great video. It was very helpful!

What if it's not the cartridge and it appears to be the dial or knob? I switched the sides of the cartridges and they both don't work.

@stevewatr

3 жыл бұрын

Sounds like you've isolated the issue to be in the stove circuitry, and not the cartridge. From this point, the best move is to proceed with a sound troubleshooting approach. This is where a skilled technician with a meter comes in. The voltages present are dangerous! The circuit is pretty basic, only if you have the skill. Sorry i cannot be of more assistance but at least you didnt buy a new cartridge.

@markh7684

3 жыл бұрын

@@stevewatr got it. Thanks. I've got the power turned off to the range. Going to take it apart and see if it's a loose wire. If not I'll call a technician. Thanks for the speedy reply.