The Jeep looks great, but the real star of this video is that kid and his mullet. Majestic.

Righteous mullet, killa.

@richardcamacho8263

Жыл бұрын

😂

Git-r-done boys great build nothing like getting your buds together and pitching in. Keep the vids coming

@CampbellBrothersGarage

3 жыл бұрын

Will do! We will be doing a lot with this XJ this summer. Paint & body will be happening soon. Painting it British racing green metallic

Hell yea love how clean the bottom is!

@CampbellBrothersGarage

3 жыл бұрын

Thanks, you can still see the grey seam sealer from the day before though haha, it was crunch time to get the unibodystiffeners welded on then painted. We didn't get time to run the grey seam sealer till the day before while it was on the trailer. Thanks for recognising how clean it is underneath, we have a lot of time invested in the undercarriage.

@officialWWM

2 жыл бұрын

That’s what she said.

Wish I had this much help with my build! Looks great guys!

Tell you what, thats a sweet little build guys! Anyone would drive that! Nicely done!

@CampbellBrothersGarage

3 жыл бұрын

Thanks man! We took our time with this one for sure. We still have a list of things that we want to do to it, I will try to post more videos of it as we continue building up the XJ.

Good job Boys hope yall have a great time in her , with many years of fantastic memories !

@CampbellBrothersGarage

3 жыл бұрын

Plan on putting many more miles on her, can't wait to do paint and body so she will be clean from top to bottom!

One of the best xj shat boxes out there! Damn nice work showin that no rub flex...dialed in perfect. And that "patina"!

@CampbellBrothersGarage

3 жыл бұрын

Thanks, our goal was minimal trimming with no rub. Very happy with how the XJ turned out. Only things that need to change suspension wise would be shackle relocation brackets and better shocks. Our buddy is running the IronMan Fab relocation brackets and he gets way more movement out of his rear leaf pack.

Badass build! My dream build for years! Just never went for it..... Lol. You guys did a wonderful job. Excellent!!! 👍💪💯🇺🇸

@CampbellBrothersGarage

Жыл бұрын

Thanks!

Love it !!! did the same on a 96 4x4 Virginia no rust

Awesome rig ! Nice of the fedex guy to help out that’s great

Nice Job fellas! That is one hell of a lift. 👍👍

@CampbellBrothersGarage

3 жыл бұрын

Thanks man

FINALLY somebody working on the same type of XJ I have, I have a 96 2 door 2wd with a manual trans. I hope to do a 4x4 conversion sometime in the future

@CampbellBrothersGarage

Жыл бұрын

Man it was a pretty simple swap! Our 4x4 parts jeep was $500 and it gave us everything we needed. After we were done, sold it to the junkyard for $300

nice !! looked forever for a clean 2door , finally found one !! did 3" 31s (wifes daily) came out great check it out

@CampbellBrothersGarage

3 жыл бұрын

I checked it out that thing is sweet, I love these 2-Door Cherokees!

@Robdutton91

9 ай бұрын

31s and a little lift is perfect

Wow, awesome work.

That Jeep is clean af 🔥😮

@CampbellBrothersGarage

3 жыл бұрын

Thanks, we are working on the interior at the moment and sometime this summer we will do the body&paint. Its our favorite project by far.

Sick build guys 👍🏽

@CampbellBrothersGarage

3 жыл бұрын

Thanks man

Great build going on there guys. I subscribe and look forward to seeing more of the videos on your channel. I just finished building some rock sliders/ steps for my H3. Take care and stay safe guys

@CampbellBrothersGarage

3 жыл бұрын

Thanks for the sub! We are working on the interior portion of the jeep now and should have some more content uploaded soon on the 2-door XJ. Once we get it 80% done I will start on the Comanche project, I have a Mercedes turbodiesel in the shop that will be going in that one.

@michaelsfabwork2985

3 жыл бұрын

@@CampbellBrothersGarage nice I’ll be looking for the video.

Nice 2 door , you guys know how to get it done! Looks 👍

Love these trucks. Hope I can get one someday before they're all too far-gone.

@CampbellBrothersGarage

Жыл бұрын

I love them more than the new ones. Thats why we started out with the cleanest 2wd 2-door we could find. Now we just have to keep it in nice shape and not thrash it too hard, lol

Noice looking rig, great progress, She looks so good! Weld and smoke from INSIDE #xjlife 🤙🤘

Damn, you all brothers and get along enough to build a Jeep? Thats just good parenting right there. Keep it up!

@CampbellBrothersGarage

Жыл бұрын

lol , I edited all the arguments and thrown wrenches from the final cut!

They left it great so I would like to be able to fix mine one day greetings from Reynosa Tamapulipas Mexico

@CampbellBrothersGarage

Жыл бұрын

Greetings, I appreciate it man

That’s a beautiful thing.

Sweet! And RPM gauge. Nice Jeep

@CampbellBrothersGarage

Жыл бұрын

Gotta have the RPM gauge, I love junkyard finds like that

Nice work !

@CampbellBrothersGarage

Жыл бұрын

Thanks!

Very well made video

@CampbellBrothersGarage

3 жыл бұрын

Thanks, I'm glad you enjoyed the video!

love your jeep reminds me of mine!!

@CampbellBrothersGarage

Жыл бұрын

Thanks man! It's an ongoing project, currently we are doing an interior restoration

Nice work guys, I smeshed the subscribe button.

@CampbellBrothersGarage

Жыл бұрын

Thanks man, I was locked out of the account for a year but we are back now and will be trying to put together at least one video a week for 2023

Looks awesome!

@CampbellBrothersGarage

11 ай бұрын

Thanks! Currently we are working on the interior

@SyedBarakbah36

4 ай бұрын

@@CampbellBrothersGaragehi , what brand do you use for rear bumper bullbar?

Bravo Well done guys

@CampbellBrothersGarage

Жыл бұрын

Thankyou sir

Felicitaciones , excelente trabajo hermosa esa jeep

@CampbellBrothersGarage

Жыл бұрын

Thanks! We love these XJ's

My 2dr is this exact color!!!!!

@CampbellBrothersGarage

Жыл бұрын

Cant beat a green XJ!

Fix that shackle angle and longer shocks. You will thank me later. Nice clean build

@CampbellBrothersGarage

Жыл бұрын

Definitely something that we fixed after this ride. This was the first time ever being on a trail with the jeep. I hope to post an update video of the jeep soon but we are prepping it for paint at the moment

Just replaced my idiot light instrument cluster with a newer set that has actual guages.....I also happen to have a EPROM Programmer with the SOI8 cable to copy the chip with the milage and VIN off it and clone the new one.... Might want to check into it when they do the yearly vehicle inspection.

2dr XJ Life 🏴‍☠️

Awesome! Now I want one lol

@CampbellBrothersGarage

Жыл бұрын

XJ's are great jeeps!

Sweet dude

@CampbellBrothersGarage

3 жыл бұрын

Thanks man, can't wait to start on the body/paint

@jonblount5424

3 жыл бұрын

Yeah it’s gonna look awesome

I had an identical Cherokee same color same dash just mine had a 2.5 4 cylinder

@CampbellBrothersGarage

Жыл бұрын

I have a Comanche with the 2.5L, I have done anything with it yet. I have a Mercedes om617 engine that I will be swapping in

Love how clean this build is excellent job! those coil springs are those 8" lift ?

@CampbellBrothersGarage

Жыл бұрын

Yes they are, thanks man

That XJ is so RAD!!!!. One problem I see is the rear shackle angle.

@CampbellBrothersGarage

Жыл бұрын

Great observation, that was the first thing we fixed when we got back! We noticed how much better the 4 door XJ was flexing in the rear

O that’s clean

@CampbellBrothersGarage

Жыл бұрын

Thanks man

So nice sir

@CampbellBrothersGarage

Жыл бұрын

Thankyou sir

Nice and clean. Doing it right. Wondering why you didn't go with a rear disk brake while you had it out?

@CampbellBrothersGarage

Жыл бұрын

This was my little brothers first build, took 3 years of saving up parts to get it going down the trail. He wants to add rear disk breaks eventually, but that will happen in the 3rd stage of the build.

Мне понравилось это очень поучительное видео!

Yep getter done

@CampbellBrothersGarage

3 жыл бұрын

Only way to roll is in 4Lo

Wish you would have showed how you wired the fan radiator combo

@CampbellBrothersGarage

Жыл бұрын

We will try to include an under-hood shot in our next video of the jeep to help you out. About to start putting out content again this fall

I see you could not bother asking me to help. Lmao

Good truck, a like, much more, than, 4 Doors,

@CampbellBrothersGarage

3 жыл бұрын

The old 2-doors just have a classic look to them for sure.

Badass...

@CampbellBrothersGarage

3 жыл бұрын

Thanks man, can't wait to get tho the paint/body stage of the project.

Nice, I would like to send my Cherokee to you to modify it from Saudi Arabia😍👌🏻

@CampbellBrothersGarage

3 жыл бұрын

We are building our new shop at the moment, when it is complete we can take on another project. Can I get your contact info?

Who makes your rear frame piece? Oh and where did u find that nice ! front door smoked window rain trim?

Beautiful rig....but is this meant to be a street jeep or a trail jeep?

Looking at going with either a Rustys, or Iron Rock! How do you like Rustys? Have they upgraded the joints?

@CampbellBrothersGarage

3 жыл бұрын

Rustys offers 3 types of systems: Radius Arm, 3-Link and 4-Link. The Radius arm was the right choice for us because they have better on road handling characteristics especially when towing. We use ours to tow the Jon boat. My 1 ton ram uses a radius arm suspension. We opted to go with the grease-able Johnny Joints that you can adjust as they wear. So far we like them. I will have 2 videos up next week of the Rustys radius arm and the CavFab 3 link in a rock garden. You will be able to see a few differences on how they function in the rocks.

@bradcampbell7253

2 жыл бұрын

Rusty's coils ride nice. Everyone bags on Rusty's. He been doing this since 1977.

So what is your total build price? Came out pretty sweet

Nice Jeep man but just so you know ethanol is actually good for these Jeeps it can lower intake temps a bit, these jeeps just aren't old enough to be affected and actually 10% ethanol is recommended this was really only an issue in the 70s into early 80s the rubber in that fuel system is rated for ethanol.

@MontanaDirtRoads

2 жыл бұрын

It's actually not good for anything older then 2000, I have a 89 and this ethenol tears everything up

@CampbellBrothersGarage

Жыл бұрын

I understand you reasoning

badass build, how much was the final price for everything?

@CampbellBrothersGarage

3 жыл бұрын

We still have a lot of work to do on it. We are sitting on a stack of parts to install. Such as 2 gallons of HouseOfKolor green British racing metallic paint. And a full Focal Audio sound system . I will put an itemized parts list in the description this week but I would say around 10k, including the parts that we have yet to install. Paint and body work will begin in the spring when we move to our new property. Then roll cage & suspension seats.

@mattclemons2148

3 жыл бұрын

How much for everything!!!!

Hey this is gonna sound very specific I have a 2 door xj and was wondering if anyone could tell me what that back side window panel is called if anyone knows please let me know

Where did you get those vent shades on the door, I would really like to know a part number please

@timothymurphy6334

2 жыл бұрын

Metoo, can't find them anywhere for a two door

@CampbellBrothersGarage

Жыл бұрын

They were on the jeep when we purchased it as a 2wd daily. We must of lucked out

What kind of rear and front springs. Heighth.

You need a skid plate for your fuel tank.

congrats it looks like every other chopped up xj

I searched high and low, exhausted all means trying to find those engine mounts. They were on my 2 door when i bought it. I know this video is 2yrs old, but where can I get them? PLEASE!

@CampbellBrothersGarage

Жыл бұрын

Rustysoffroad.com

this crew gets shit done

Were did you get those u bolts and the leaf springs and shocks?

@CampbellBrothersGarage

Жыл бұрын

Rustys Offroad

15x10 wheels??

How is that thang on the highway wit dem 4.88s and 35s? Are the RPMs hella high?

@CampbellBrothersGarage

Жыл бұрын

55mph 2000rpm 5th gear, we dont run a sway bar so we keep it under 60

How much lift is that total? Nice vid!

@CampbellBrothersGarage

3 жыл бұрын

From our measurements we lifted it 15” from the stock saggy 2wd suspension. Technically the suspension lift we used was 8” of lift over a factory 4x4 Cherokee. Our stock suspension had seen better days...

What e brakes did you go with?

@CampbellBrothersGarage

3 жыл бұрын

amzn.to/3tvxkB9

Where did you buy the rain guards at?

@CampbellBrothersGarage

Жыл бұрын

They were on the jeep back when we purchased it as a stock 2wd. Could be factory

Did you remove the sway bar and links?

@CampbellBrothersGarage

Жыл бұрын

Correct, no sway bar

Badass man! Y’all from the Shreveport area? I gotta 88 xj 4.5 lift 🤙🏾

@CampbellBrothersGarage

3 жыл бұрын

Yessir!

@evanthomas7116

3 жыл бұрын

@@CampbellBrothersGarage we gotta link up live to see that xj

what wheels are those? can you tell me the brand and the wheel wide?

@CampbellBrothersGarage

Жыл бұрын

Raceline RT81 bead locks, widest offset available on the website

What rear bumper are you using ?

@CampbellBrothersGarage

3 жыл бұрын

amzn.to/30rXJTY

Did yall keep the Dana 35? Why not an 8.8 swap?

@CampbellBrothersGarage

3 жыл бұрын

High pinion Dana 30 in the front and Chrysler 8.25 in the back. Both have Yukon shafts and ARB lockers.

@Charles-qo2wt

3 жыл бұрын

@@CampbellBrothersGarage You mean a Ford 8.8 or a Chrysler 8.25? Looks like 8.25 to me. Awesome xj btw! I'm currently building a 98 4d 5-speed.

@CampbellBrothersGarage

3 жыл бұрын

@@Charles-qo2wt yea man that was a typo I have a 8.25 rear lol

@bradcampbell7253

2 жыл бұрын

I can't believe they wasted labor and paint on it. Dana 35 rule number 1. Anything breaks on a d35, toss the whole axle and get 8.25 or 8.8

@bradcampbell7253

2 жыл бұрын

Lol sorry I thought it was D35

I miss getting 14 gallons w 25$🥲

@CampbellBrothersGarage

Жыл бұрын

Those were the days

That shackle angle don't look to good, I hope you replaced them with corrected geometry units

@CampbellBrothersGarage

Жыл бұрын

I agree, the Rusty's brand shackles were a no-go. Severely inhibited our rear travel. We are currently experimenting with other designs.

@MontanaDirtRoads

Жыл бұрын

@@CampbellBrothersGarage I have Rubicon express Boomerang shackles, I believe they are 1 1/2 longer then stock on top of 3" lift springs and she flows free

Hey quick question is your jeep street legal

@CampbellBrothersGarage

3 жыл бұрын

Yes it’s street legal we drive it everywhere

No bump stops ?

@CampbellBrothersGarage

Жыл бұрын

We are running slightly extended factory bump stops

What size lift and tires?

@CampbellBrothersGarage

3 жыл бұрын

8" lift and 35x12.5 Tires

What paint for the bottom Thx

@CampbellBrothersGarage

Жыл бұрын

2k Black equipment paint, I can't remember the brand

What steering system did you use

@CampbellBrothersGarage

Жыл бұрын

Stock steering box

@chiotisaa4088

Жыл бұрын

@@CampbellBrothersGarage what about all the steering linkage

What is your axle gear ratio ?

@CampbellBrothersGarage

Жыл бұрын

4.88 Yukon gears and axle shafts, front and rear

What rear bumper is that?

@CampbellBrothersGarage

Жыл бұрын

Smitty-Built XRC bumper, we chose this bumper because it had a 2” receiver and heavy duty reinforced mounts.

Wanna sell me that rear passenger window loll

@CampbellBrothersGarage

Жыл бұрын

We just got a set of rear windows with sliding glass!

@profeex9789

Жыл бұрын

@@CampbellBrothersGarage hell yeah loll I just got my 98 2dr inspected today first time in 2 years can’t wait to drive legally on the road loll

Upppps am sorry I see!

I have a 2 door I'm building I couldn't do the axle swap it's a 8.8 damn shop messed my jeep up installed everything wrong jeep is my daily sucks

@CampbellBrothersGarage

3 жыл бұрын

Gotta love it when the shop screws up your daily, that sucks

@nicholasgilson6745

3 жыл бұрын

@@CampbellBrothersGarage you don't live in nh by chance do you lol. If I have 3.5 of lift and the Ford 8.8 is higher do I need a sye and cv driveshaft... It has a stock Tom woods with the 8.8 flange from iron rock. Idk what to do it vibrates really bad letting off the pedal and when under load slightly but let's off when it has more load. Tells me they messed up pinion angle or driveshaft length etc..I did 5.13 gears to. When I first got it back it was so bad it sounded like the transfer case chains were slapping when I was under it on a lift under load they said they'd give me a new transfer case put in a 231 when original was a 242 they claimed they bought a 242 they are different and any real off road shop could tell them apart they lied and I've got the jeep back 4 times being messed up and too it off they were going to do a sye and new driveshaft then called me and said they put the broken 242 and that they fixed it and were done trying. Now I have to go after then for money I paid them 3 grand for labor I also did wheel bearings other front end parts new brakes all around with black magic pads they are magic. Now I feel screwed bad. They said I brought my own parts so it's my fault. Yet the only part I believe is wrong was the one part they ordered the driveshaft. I've spent 5k total and can't drive it and I work a hour away 3 day project they claimed to start has been Almost 2 months. I haven't even bashed them on forums or Facebook no bad reviews I just want half back that they claimed the axle swap would cost so I can get a new driveshaft and fix my transfer case. I wish I could work on vehicles but I live in a condo. Idk what to do next. I feel like a sye and cv is going overboard considering it's a 2 door that Ive been trying to make better and restore and do it right with good parts and it only is lifted 3.5 4.5 max there are people with 6 inch lift that have stock driveshaft. Also I have the transfer case drop... Should I do a motor mount lift will that effect the angle enough?

@fedlert1

Жыл бұрын

bro im in the same boat

@fedlert1

Жыл бұрын

if so what is your pinion angle…and did you use shims???

Привет из России я меня 5,2 zj

@CampbellBrothersGarage

3 жыл бұрын

Привет, приятно видеть, что у меня есть зрители по всей России, добро пожаловать, друг. У тебя тоже есть джип?

@user-xw5ub3yn6x

3 жыл бұрын

@@CampbellBrothersGarage Да. 5.2 Магнум . 1995

@user-xw5ub3yn6x

3 жыл бұрын

@@CampbellBrothersGarage zj

@CampbellBrothersGarage

3 жыл бұрын

Это намного больше, чем у моего 4,0-литрового рядного 6-цилиндрового двигателя. Я уверен, что водить этот джип весело.

😭😭😭 $25 for 14 gallons 😭😭😭

@CampbellBrothersGarage

Жыл бұрын

I miss those days!