JEEP Wrangler LED Mirror Installation Tutorial
Автокөліктер мен көлік құралдары
In this video, I will be installation a pair of LED Mirrors on my 2014 Jeep Wrangler Unlimited. Feel free to watch this step by step tutorial and follow along.
Jeep Wrangler LED Mirrors - www.gtajeeps.ca/product-p/41.htm
www.adventuredexonline.com
My Jeep Build List - amzn.to/2AwJHCc
Camera Used: amzn.to/1Uos4vg
www.adventuredexonline.com
Thanks for watching!!
Follow me on Social Media
Facebook - adventuredex
Twitter - adventuredex
Instagram - adventuredex
Special Thanks to JeepAccessoriesGTA
Пікірлер: 349
Cool video, clear no bad audio. Right to the point. Showing step-by-step instructions. No music blasting on how to vid making it hard to understand. Started to follow, already clicked on links for add on to my jeep. Keep up the good work.
@adventuredex
7 жыл бұрын
Thank you! I love the feedback and will continue to make top notch Jeep installation videos!
Dude....this video saved me hours of installation..step by step was on POINT.... final installation looks killer! Thanks 👊🏼
@demarcuscrump4904
2 жыл бұрын
What tools and sizes were needed?
Just finished watching the video, honestly, I was not expecting much from the brightness of the side led's, I have to admit I am quite impressed. I will be saving this video for my side light install, Thanks AdventureDex.
@adventuredex
7 жыл бұрын
+Denis Picciuolo thanks for the positive feedback Denis! They are very bright and great for being able to see to the left and right where the headlights can't reach!
On the mirror separating aspect: put the connecting bolt back into the bottom about four clockwise turns leaving about 3/8” of the bolt away from tight. Then hold mirror extention arm, and use hammer to drive bolt down towards mirror housing, three good blows will separate the extention from the mirror housing. Time: 7 seconds
@adventuredex
6 жыл бұрын
Thanks for sharing!!
Im not sure if anyone else has posted this. But it's easier to separate the base of the side mirror from the housing by leaving the mirror screwed in the housing so you have more support when you're hitting it
@christopherdemmer4365
4 жыл бұрын
Libni Guerrero this saved my day. After 30 minutes of hammering with a screwdriver, I went to HD and purchased a 4” Hex Cap Screw, class 8.8, m8-1.25x100 then screwed it most of the way into the threads and hit it with a regular hammer several times. Using the longer screw was the only way I was able to separate the parts and it only took a min. Than you
I just bought these mirror lights right before Christmas and had no way of how to make these lights be a plug and play type for in the summer time when I want to take the doors off. AdventureDex glad you posted this video! This will help me a lot when I install mine! Great videos! Have watched most of your videos and I've learned something from all them.
@adventuredex
7 жыл бұрын
Thanks a lot Eddie! I am so glad that this video helped! I enjoyed making it and am glad you enjoyed watching! Feel free to watch this video when doing your install. It is not extremely difficult if you take it step by step! Thanks for the support! #jeepwave
I subscribed because I own a Jeep 2014 wrangler JKU as well and your tutorials are soooo helpful. Keeps my husband from having to help me all the time :)
Great Video. I have a more basic 2013 wrangler, roll up windows, manual mirrors, this shows me I can add these even though I have the manual mirrors. Thanks again.
putting the string on the end of the old mirror will save you a great deal of work THANK YOU VERY MUCH FOR THAT TIP!!!!!!!!!!!!!
Great video! I was nervous to try this but I feel better after watching this video. Side question, what interior rgb lights did you get? Thanks again!
I like these better than the light bars. it's more discreet and gets the job done, great video.
@adventuredex
7 жыл бұрын
I agree Jeff! Thanks for watching!
Thanks for that, this'll help a lot - getting some in in a few days that I'll have to wire up myself, looks like a really cool product. Any tips for getting it through the door panel hole if one doesn't have the power mirror harness to help fish it through?
Great video, I was looking at your build list because I like your grill with the light bar installed to check out the grill & didn't see it listed, I checked out the links you provided is that custom?
Awesome video! I've had my eye on a set of these for Project Dirty Willy.
@adventuredex
7 жыл бұрын
+Rocky X TV they are sweet! Glad you enjoyed! #jeepwave
Muito bom este vídeo , boa técnica , obrigado 🙏🏼 e que sigue fazendo más vídeos 🎉
Awesome video brother, thank you for the step by step tutorial.
@adventuredex
7 жыл бұрын
+Titan Ro thanks for the positive feedback! #jeepwave
These are on my list as I like the smoke turn signals and the lights
Thanks for watching! I hope you enjoyed! #jeepwave
@socomt5
7 жыл бұрын
Off subject, where did you get your color ac covers? the Red really sticks out, and I think that would look good in my gray jk! Great vid btw!!! and happy new year.
@adventuredex
7 жыл бұрын
+Denis Picciuolo Thanks a lot Denis! I have a DIY video on how to paint the vent covers! Check out my other videos! Thanks for watching! Happy new year
@kennyconley8383
7 жыл бұрын
AdventureDex when hooking up the power of the lights that color wires did u hook it up too in your jeep at the bottom? that's where I got lost at. and trying to put it on a switch. confused
@danielgonzales9413
6 жыл бұрын
AdventureDex i have a problem i think i installed in a bad way my mirrors connection cables, is there a way you can show me how to do it without the string u tie to the cables? I took it out without a tie string on the cables of the power mirrors
@adventuredex
6 жыл бұрын
+Daniel Gonzales no worries just use a snake to feed the wires through. You can get one at any hardware store!
Hey, Dax, I was enjoying this video, but I have a couple of issues with it. First, during the wiring phase you connected the ground wire to the frame and you already had you quick connects on the other two wires, but where did you connect those too? You went from the negative ground to soldering the other three wires and you lost me there. Also, while serpentining the wires to the other side, how would I connect those?
Well this video helped me decide to buy the mirrors, great video Bro, thanx!
6 and half hours later! lmao. Just got a pair of these same LED mirrors will install tomorrow thanks for the tutorial buddy
@adventuredex
6 жыл бұрын
LOL Thanks for watching Matt! Goodluck with your install!
Question: I have these and love them but on one, the light went out so only one of them work. Can they be replaced or do I need to change them all the way out?
Does this work with Jeep gladiator 2020 since everything is usually the same on wrangler
I ended up purchasing the Xprite Clear Lens Red LED Brake Tail Lights Assembly with Rear Turn Signal Reverse Lights For Jeep Wrangler JK which looked and worked just like the Anzio lights for half the price. Great test though, gave me insite and direction.
@adventuredex
7 жыл бұрын
Thanks for the comment Michael! I am glad you found the video helpful! #jeepwave
I love those side mirror lights is it possible you could send me info on how to get them wow man I did not think that they would throw that much light from one side to the next that’s awesome
I cannot seem to find the indicator light wire on the factory harness. I’ve searched using a tester with no luck. Perhaps the amperage isn’t high enough to power the mirror indicator light? What color is the stock oem indicator light power wire on either side of the vehicle? I’ve tested the indicator light right to the battery and it illuminates just fine
I have a 6 botton switch that goes in the inside of my roof, where you say that you have two possitive, one goes to the signal light. Does the other one go on the switch box or where does it go??
How about a led kit that you cut your mirror housing & install. Note also it would be good to purchase some OEM connectors to create harness from led wiring through door panel to give more professional installation.
So there is no way I have the patience or talent to do that. But still wanted to thank you for the video and they are freaking awesome looking!
@adventuredex
7 жыл бұрын
+mets0403 Thanks for the support! If I can do it then I am sure you can! #jeepwave
I know this is old, but hopefully you are still answering questions about it. I'm doing a similar job and I'm wondering what is the easiest way to get the turn signal light wires into the inside of the Jeep? The wiring of these to make the turn signals and spot lights work has me a bit stumped. Thank You!
Just wondering why you didn't use a three terminal connector where you used the three "Quick Connects" to extend the wiring for the LEDs? Would have made it much easier to disconnect when you take the doors off
Hi I did install the two mirror with the LED light and everything work perfect, But the problem that I have right now it’s with the one wiring left for the Brinker, Also in my turn signal adapter I have just two wiring black and white what should I do to make it work ? Thanks
Badass Dex! I've got a mirror I gotta change out. Some idiot hit my jeep mirror on the left and gotta replace. Thanks for the instructions.
@adventuredex
6 жыл бұрын
Anytime Luis!! 🤙🏼
Can you explain more how to install this side mirrors to me please im lost and dont know what to do i love watching you videos just in this installation im having a hard time hope to here from you soon and thank you for your KZread channel it helps alot
Nice video. I think I'm a step closer to buying these now!
@adventuredex
7 жыл бұрын
Thanks Louis! These are awesome! Totally recommend
Great videos man. I love them. They really helped my jeep look great
@adventuredex
7 жыл бұрын
Thanks Amir!
@amirtv2479
7 жыл бұрын
AdventureDex up load more
So when you have your parking lights on does this turn in the indicator on the mirrorsV
Thanks, I'll get them in short order. Will mention you in the notes.
my passenger mirror came apart with no problem, I am about to give up on getting the driver mirror apart.....whew....good video very helpful.
Sir, I have a 2019 jeep wrangler,and would love those Mirrors, will they work on my Jeep?
Too much work!! I'm just going to duct-tape flash-lights to my mirrors :)
@adventuredex
7 жыл бұрын
LOL that could work too! Thanks for watching!
@GoBrentSpence
4 жыл бұрын
LOL... Good Luck with that... :)
What if I only want the indicator? Can I leave the other two wires tied off?
Excellent installation
These look great on your jeep!
@adventuredex
7 жыл бұрын
Thanks alot Colin! #jeepwave
i have the same as yours but LED not lighting at all don't know what could be
That's a great video dex thx i like those mirrors nice
@adventuredex
7 жыл бұрын
Thanks Yaniel!
will they work if you don't have electric mirror
Do they sale one for the YJ Jeep?
Very helpful!! My next mod!
@adventuredex
5 жыл бұрын
Thanks!!
Good video! I might have used a door panel tool. They are really cheap and lessen the stress on the clips.
@demarcuscrump4904
2 жыл бұрын
Where to get tool?
@michaelmixon2479
2 жыл бұрын
@@demarcuscrump4904 Local auto parts store will sell them in a set.
Great video man. Just installed a pair of led mirrors. Not those but basically same thing. Only problem I’m having is the turn signals only work if the spot lights are on. Not sure what’s up.
@adventuredex
6 жыл бұрын
That is strange, you might of wired the whole thing up to a switch instead of having them independent! Thanks for watching!
How do you wire the blinkers
I love these!! Already looking into getting these. They're gorge!
@chantalxox
7 жыл бұрын
Question!! What lights do I need to purchase to match the LED mirrors?
@adventuredex
7 жыл бұрын
Thanks for the comment! Yea, they are always!
@adventuredex
7 жыл бұрын
What do you mean match? Where are you planning on mounting the lights?
@TheJohnhazelair
7 жыл бұрын
Gorge? No offense, but you typed out every other word- why not finish typing out gorgeous? Ugh society today. "Let's make fetch a word".
@chantalxox
6 жыл бұрын
TheJohnhazelair Um... Why do you give a shit about how I talk? I'm a chick, not a dick so if I want to say gorge, I can. And yes, I made fetch happen. 😉
I just saw these this month and was wondering if I could find a video of them, they look awesome. Did you wire both LEDs to the same toggle switch? Also, you had to cut the white/red wire for the indicators and splice the wire into it correct?
@adventuredex
7 жыл бұрын
Thanks for the comment bro! I already had my pod switch prewired so I ran the two positives from the LED mirrors connected them together and connected it to the switch. For the indicators, if you have a true splice clip you don't have to cut the wire, you can clip directly onto it and it makes the connection very easy! Hope that helps! Thanks for watching!
How can you wire these to your DRLs and turn signals? I used a splitter running the turn signal wire to both but either one works or the other but not both. Any suggestions? Thanks!
@adventuredex
4 жыл бұрын
I don’t believe they can work simultaneously
What size bolt and tool is needed?
I love your vids keep it up
@adventuredex
7 жыл бұрын
Thanks alot for the support!
I'd like to get those for my 1997 80's series. Looks awesome! Can it be done?
@adventuredex
7 жыл бұрын
Thanks for the comment! It could be done but it would have to be custom fabricated! You could possibly get a very slim flush mount LED and mount them behind the mirror. Hope that helps! thanks for watching!
You make really nice explanatory videos! I just wished you owned a JL 😁
These are the sprites?
After watching your very helpful video I bought a set of these. Unfortunately I couldn't get over the large gaps between the glass and new housing so I sent em back. Great video though.
@adventuredex
6 жыл бұрын
Thanks for sharing! What large gaps?
@USfoolsgold
6 жыл бұрын
On the set I ordered from Amazon there was a large gap between the outward side of the glass mirror and the new led housing. For me, the mirror looked way too small in that housing. Got mine from Lantsun on Amazon.
@adventuredex
6 жыл бұрын
Yah that is usually how they are!
Just installed… everything seems good except the indicators are just on the dont flash when I turn or emergency the just stay running and I made sure I hooked it up to the corresponding yellow wire on light harness
@victorcuevas5179
Жыл бұрын
It's the red and white wire
Good video. Are those LED side lights legal for highway/street use? And are they adjustable for more forward use?
@adventuredex
6 жыл бұрын
All depends on your local laws! Thanks for watching
I was watching your video onto how install your LED lights side mirrors my doors have power locks power windows but not my side mirrors what can I do
@adventuredex
6 жыл бұрын
It makes no difference in the installation, follow the same steps! Thanks for watching!!
Would of love to see the full actual process from when you connected the negative forward // first time working on something like this and after seeing you skip half the steps (since you know what your doing ) lost me .. mine bring two switches
Nice! love it
I can’t wait to do it to my Jeep
What type of rosin solder did you use to wire? And as far as the quick disconnects, what size were they (12-10 AWG, 16-14 AWG, 22-18 AWG)? Thanks! Can't wait to do this to mine! :) Keep up the vids!
@adventuredex
7 жыл бұрын
Thanks for the comment William, Unfortunately I don't know the answer to either questions. The quick disconnects that I would recommend are these (amzn.to/2nJUNQu) Thanks for watching!
Hey man! I have heated and power mirrors on my 2015 Sahara. Will these replacements also be heated and power mirrors?
@adventuredex
7 жыл бұрын
Thanks for the comment! Yes, these will work with no problems!
Those mirrors are so sick ! I will buy some for my jeep
@adventuredex
6 жыл бұрын
Thanks!!
I have a 2012 JK Sport 2dr. It's a basic model, so no power doors, locks or mirrors. Is there an install/ wiring video for that?
@adventuredex
6 жыл бұрын
Thanks for the comment! Its the same process just use a snake to fish the wires through the door. Hope that helps! Thanks for watching!
awesome glad to see a local Toronto supplier! how do you think these will hold up? how's the build quality? thanks for the awesome install
@adventuredex
7 жыл бұрын
Thanks for the comment! They seem to be good quality! The housing is exactly the same as the Mopar so as long as you don't hit them on anything they should last! Thanks for watching!
Great video!
@adventuredex
7 жыл бұрын
Thanks Buck! #jeepwave
How'd you wore to driver side door then to the wiring pod? I connect wires to driver door wires, then I tap into those to run to pod/turn signal?
@adventuredex
7 жыл бұрын
Yes, you only need to connect the two LED's. The turn signals get wired individually cuz they are controlled separately by each side. Hope that answers your questions.
Is good to learn how to do, but is not clear about to connect the external turn wire from with inside cable.
Hello, thanks a lot for your video, we followed it step by step to make it, but one of my side mirror sis missing one of the 3 little screws behind the mirror, I was wondering if you knew what kind of screw is it to buy one, thank you
@adventuredex
3 жыл бұрын
Glad you found it helpful! Now sure on the screw as it’s been a while since I did this install. Thanks for watching
@julienagostini7952
3 жыл бұрын
@@adventuredex That was a fast answer, yes that was very helpful, mostly the string trick, and no problem, I just didn't want to have to take one out again 🤷🏻♂️ thank you tho
(looking at the front) my right side indicator has two white wires one with green stripe and one with a brown.... my left had red and brown..
@adventuredex
6 жыл бұрын
When you are unsure just use the process of elimination! Hope that helps!
Thanks a lot bro!
Great video they look great
@adventuredex
7 жыл бұрын
Thanks alot!
hey bro. I've been trying to tint my soft top from a long time now and I couldn't. Any tip?
@adventuredex
7 жыл бұрын
Hey Elvis, thanks for the comment but I am not sure what you mean by tint your soft top?
my jeep is a 2010 door panel is diffrent and my mirrors are not powered or heated any suggestions yo make it work
@adventuredex
6 жыл бұрын
Its the same process just the bolts on the door are in slightly different places. Thanks for watching!
I’ll never do this but I’ll still watch
@adventuredex
6 жыл бұрын
Haha Thanks for watching!
Where did you get the LED turn signals, and the color changing LED lights inside the jeep.
@adventuredex
7 жыл бұрын
Thanks for the comment! I have videos on both items on my channel but most parts you can find on my online store! www.adventuredexonline.com! thanks for watching!
My question is where to hook up the switch if I have no accessory panel of switches!? I don’t understand how to do this as there is no instruction on how to connect the switch and where to run the power for that switch. This is a bit of a challenge for someone like me. I can run the wires to the turn signals no problems and the ground, but the Main Power for the switch and led lights is a bit confusing as there are NO INSTRUCTIONS how to do it!! Don’t understand why all the praise for a clear missing portion of the install on the opposite side!
Still currently having trouble separating the mirror
I have a 07 Jeep Wrangler X the door has power locks and windows but not the View mirror what can I do
@adventuredex
6 жыл бұрын
What do you mean by view mirror? This can be done to an 07 with regular mirrors. I installed it last week on an 08, it is slightly different but the same method! Thanks for watching!
Could you hook the side mirrors up to ur brights instead of the switch?
@adventuredex
7 жыл бұрын
+Justin Manning Yes, they can be hooked up to any power source. Thanks for watching!
I was done with work on JL
I did not attach a string to the end of the mirror Any advice on how to feed it back thru
@adventuredex
7 жыл бұрын
Damn Hector! Your supposed to watch the video in advance! LOL Use a snake tool to pull the wire back through. Hope that works! Thanks for watching!
My daughter pulled the out and now I can’t get the wire back in. Help
Dex, do your power mirrors work with these lights?
@christopherdemmer4365
4 жыл бұрын
Brent King the answer is yes
Your wire stripper has an "insulated" and "non insulated" area for crimping connectors. You are using the "non insulated" area for crimping your insulated connectors. Just thought you should know.
@adventuredex
7 жыл бұрын
Thanks for the comment Chris! I appreciate the insight! Sometimes in rushing you make mistakes!
Will the heat mirror work after this been installed?
@adventuredex
7 жыл бұрын
Yes, everything get reconnected and works perfectly! Thanks for watching!
OMG!!! I have been "beating the ever lovin shit" out of this thing and I cant get it to separate.. The wiring does not scare me off this project but not being able to separate this mirror has me stumped! In the feed there is a post where he says rotate the mirror till it clicks. But is that after you loose it from the housing? I really like your videos but I really wanted a closer look at this base I'm beating the shit out of. Any clues?
@christopherdemmer4365
4 жыл бұрын
David Johnson I found that the fastest way to separate the two parts was to use a longer mounting screw instead of a screwdriver. I purchased a 4” Hex Cap Screw, class 8.8, m8-1.25x100 then screwed it most of the way into the threads and hit it with a regular hammer several times. Make sure you are holding the mounting bracket and not the mirror bracket. Using the longer screw was the only way I was able to separate the parts and it only took a min. Also make sure you don’t screw the screw in all the way because you don’t want to damage all the threads in the housing.
What kind/gauge wire do you use to extend for the lighting
@adventuredex
6 жыл бұрын
I usually stick to 14/16 G Thanks for watching!
@jonathanstafford3383
Жыл бұрын
@@adventuredexvideo shows a 10-12 …
wow dude... that's a ton of work. great video tho
@adventuredex
7 жыл бұрын
Thanks alot bro!
Are they street legal ?
Great video Dex! loving the jeep!
@adventuredex
7 жыл бұрын
Thanks alot Ben! I appreciate the support! #jeepwave
@billyrtaylor8041
6 жыл бұрын
Ben .Lux
While I like the lights I want to put those power relocated mirrors on so I can take my doors off
Are you allowed to drive with these side mirror lights on? Or is it illegal just like the light bar
@adventuredex
6 жыл бұрын
Depends on your local laws but I don’t recommend using these on road. Thanks for watching
@paulchung9921
5 жыл бұрын
Dex is right. They are bright as hell and mine come on with the headlights. I do this in Korea to harass the annoying rude taxi drivers but I do blind everyone else. I need to control these lights with a toggle switch.