Jeep Wrangler LED Headlights - How To Install (2006 - Present)
Автокөліктер мен көлік құралдары
NOTICE: LEDs installed on this vehicle were for show car and instructional purposes only. Exterior LED bulb replacements for headlights are not legal for street use in USA. Exterior LED bulb replacements are only legal for Fog Lights in road vehicles and off-road usage. Please check with your specific location's laws before installing and using them in your vehicle.
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our KZread Channel. It's nice to know our customers and friends care!
00:00 - Intro
00:53 - Let's begin
04:48 - Bulb Replacement
09:30 - Outro
⇢ Subscribe: / precisionled
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED
#precisionled #jeepwranglerledheadlights #jeepledlightinstallation #jeepwranglerledlights #ledlightsforjeepwrangler #carledlights #jeepledlights #ledlightsforjeepwrangler #precisionledlights
Пікірлер: 158
I really don't know who's giving you thumbs down. I never comment on videos, but this deserves a thumbs up and a thank you. Best instructional video on this! Thank you
@PrecisionLED
3 жыл бұрын
Wow, thank you so much! We really appreciate the positive feedback.
@rickpena1423
2 жыл бұрын
Maybe because the jk chassis is 07+. 06 is the TJ
@baciliogalindo8159
Жыл бұрын
SáññSñññ as ay
This is the best instructional video I've watched explaining how to install the LEDs.Thanks Man!
@PrecisionLED
3 жыл бұрын
Thank you for the kind words!
All went exactly as described, until I went to install the new headlight. The insert tabs were off by a 16th of an inch. No matter how I tried, I could not get them to go in. Fought with it for an hour and a half. Gave up and reinstalled the factory headlight. No complaint on the video though, the visuals & description were easy to follow! Thank you & Merry Christmas!
Phil. I ordered LED headlights for my 2016 Jeep Rubicon. I was going to have them installed professionally, but after watching your video, a buddy and I decided to do exactly what you were doing and it was so easy. It took less than 30 min to install the lights and put the jeep back together. Thank you for saving me money....
@PrecisionLED
3 жыл бұрын
Glad we could help!!!
Thanks for a great video! It was exactly what I needed to get the job done. I appreciate the step-by-step description of the entire process, complete with all the little details. Much better than other videos on this same topic. Thanks again!
@PrecisionLED
3 жыл бұрын
Thank you for the positive feedback!
For anyone who is interested in why there is a capacitor involved when switching to LED headlights it is because the power supply (alternator/regulator) while the engine is running creates a ripple effect as the engine runs at different rpms during driving. The capacitor smooths out the DC voltage so the headlights won't flicker. For LED brake lights a resister is added to the circuit to make sure the turn signals blink at the same rate as before the change was made.
Thank you! Watched this and got it done in about 10 minutes. Much appreciated!
@PrecisionLED
3 жыл бұрын
Glad to hear, thanks for watching!
Thank you! Just bought new headlights and when I looked under the hood to see how to put them in I knew it was a KZread moment 😉
@PrecisionLED
3 жыл бұрын
Thanks for tuning in!
im installing different headlights I was just looking for what im getting my self into if its a after work job or a weekend job, easy enough thanks for the video
@PrecisionLED
3 жыл бұрын
Thanks for watching!
I love those headlights , I like hhow the ring looks, great job on the install
@PrecisionLED
3 жыл бұрын
Thank you!!
Worked perfect!
Very clear instructions, thank you.
Seems easy gonna give it a try with your exact directions! Thanks
Spot on, just did mine a couple of hours ago. Thanks a lot PrecisionLED
@PrecisionLED
3 жыл бұрын
Thanks for watching the video!
So simple so elegant! I have a bmw e70 and who doesn t know, you have to take apart half of the car and wheel too, yes the wheel too just to change the headlight and hours of work if not a full day. this was a joy to watch.
@stephenhagen234
8 ай бұрын
Yep, Jeep Wranglers are the 'Legos' of the automobile world. They are still one of the few vehicles on the road with the DYI mechanic in mind.
I watched this 2 years ago and am now watching it again because I’m switching them up hahaha thanks... again! Haha
Great video! Thanks for putting in the time and effort
@PrecisionLED
3 жыл бұрын
Thanks for taking the time to watch!
It's a very useful video for installing LED headlights Thanks bro
@PrecisionLED
3 жыл бұрын
Thank you for tuning in!
Very informative video and Straight to the Point " thank you , keep em coming .
@PrecisionLED
3 жыл бұрын
We definitely will and thanks for tuning in!
Great video. I am just getting ready to install a set of LED's myself and your instructions should help out quite a bit.
@PrecisionLED
3 жыл бұрын
We hope it helps! Thanks for watching!
I have the same lights , how do I just turn on the halo lights with out turning on the head lights? I have red halo lights
Great video!
Need to know if this would be the same process for a 17 patriot... also would wrangler sets be cross compatible.
Great Video. This will be very helpful when i swap out my headlights for LEDs in the near future.
@PrecisionLED
3 жыл бұрын
We hope it goes smoothly!
Thank you 💪🏼
TYVM for excellent demonstration
@PrecisionLED
3 жыл бұрын
Thank you for watching!
Dude. I know this is old, but it really helped me out. Thank you!
Great video....well done!
excellent tutorial 👍🏻👍🏻
Very helpful video. Thank you.
@PrecisionLED
3 жыл бұрын
Glad to help!
Bravo!! Really professional video
@PrecisionLED
3 жыл бұрын
Thank you so much!!
Great video, thanks.
@PrecisionLED
3 жыл бұрын
Thank you!!
how do i turn on the halo? or is it always running?
Awesome video. Thanks
@PrecisionLED
3 жыл бұрын
Thanks for tuning in!
So low beam is the top middle light and bottom middle light are the high beams?
I notice the new headlights didn’t click and lock into place with red tab. Mine won’t either. What do I do?
Thank you!!
@PrecisionLED
3 жыл бұрын
Thanks for watching!
is there a mode where only halo is in? say with parking lamps on only?
Good video
Great tutorial
@PrecisionLED
3 жыл бұрын
Thanks for tuning in!
Wow thank you 🙏.i was clueless I’ll definitely do it myself 😜
@PrecisionLED
3 жыл бұрын
Thanks for watching!
awesome video. thanks for the info
@PrecisionLED
3 жыл бұрын
Thanks for tuning in!
Can you please share what headlights these are? They look like they are true plug and play, including the halo...and I’ve been wanting to find one like that...all the halos require splicing that I’ve seen. Thanks!
does this work for the jeep patriot too?
Can the Oracle part of the light come on by they self without turning the whole light on
Hey Jeepioneer, I bought a 7" Led Headlamp with a DRL option. I followed your ii's(install instructions ) but now have single red wire with a connector standing alone. ;( I believe it is for DRL. what do i do?
Good day guys, nice vid! Im having an issue with this type of headlights on my jeep 09 on the right side low and high beams work perfect but not normal headlight do you guys have any idea what could be the issue because I dont think I should replace the whole headlight.
Great video for working on headlight
@PrecisionLED
3 жыл бұрын
Thank you for watching!
Is there a way to change the bulbs becauae I don't seem to find that anywhere
Are these headlights halos? I believe I have the exact same kit as yours, but I have never been able to get the halos to work..
Vielen Dank für das tolle Video.
@PrecisionLED
3 жыл бұрын
Thank you for tuning in!
Are those connections water tight
Can you send a link for these I’ve got a 2009 Jeep Wrangler unlimited X 4 door
My sets of LED headlights have two extra wires that are meant to be wired to the fuse box. I believe one is for daytime running lights and I’m not sure what the other is for, but my question is do these have to be wired in or can I install the new headlights without it?
Sick beat
@PrecisionLED
3 жыл бұрын
Thanks! Glad you enjoyed it.
Neither of my high beams will turn on... Any one know if i can buy new wires anywhere?
Installed mine and for some reason they don't work as great as the regular ones. There not bright at all and the high beams you can't even tell if the lights are on. Is there something I missed? The alignment is good
Do these leds fit the Renegade?
the first adapter wont fully go in. not sure what im supposed to do cuz they wont stay in
I have questions. Your video is great. It made things easy but a few things are strange. For example my high beams immediately come on. When I turn high beams on. They go off. Help
How do you adjust these headlights if they are aimed too high
It’s a great video but for my Jk I have to keep tripping the plastic housing so my headlight could sit flush inside the housing. Not sure if I got just cheap brand of lights, there the alignment on the headlight not the same
Great you show me how to do exactly half the job. You didn’t even talk about The Amber turn signals.
@PrecisionLED
3 жыл бұрын
We actually do not advertise turn signal LEDs as they would hyper flash when ignited.
Good video Im waiting for my lights.
@PrecisionLED
3 жыл бұрын
Thanks for watching!
What's going to happen if you lost one of the moisture control cap (mentioned in 4:42 on your video) on original headlights? Will it make my headlight moiture and water leak? Thank you.
@PrecisionLED
5 жыл бұрын
Yes, this is indeed a possibility. We DO NOT recommend installing without the dust cover.
how about the signal lightss of it
I was told I needed to buy a bracket to make this work is that not the case?
Great instructional video but I would have liked to see a before and after comparing the light intensity on the garage door at night so we know how much more we would prefer led vs halogens!!
@PrecisionLED
3 жыл бұрын
Thanks for the suggestion! We will definitely keep that in mind for future videos.
What is the name of these lights?
Hello PrecisionLED, In your video here, the LED headlights require a capacitor. Are these generic capacitors or specific for this particular LED lights? Do you sell the capacitor? Thank you,
@m9katchm9
7 жыл бұрын
vancouverboy it says it's included with the kit
Do the daytime running lights work as well?
@PrecisionLED
3 жыл бұрын
We have listed the DRLs project from the same light as the high/low beam. This video shows the conversion of the high/low and DRLs. I do apologize if we did not specify that in the video.
what about the 2 extra wires for the halo wiring?
@krissysmith7639
7 жыл бұрын
That's probably for the switchback option. You hook those up with the blinkers so that they flash with the blinkers.
@orlandopagan3776
6 жыл бұрын
Schuylkill County Jeep Alliance
does anyone know if these headlights are legal? I just bought them and installed but they seem very bright on the road.
@gwaky0495
7 жыл бұрын
Sean Bastick they say DOT SAE on the top so they should be legal
What LED lights did you use here? BTW, Great step-by-step video
Hello, I like the way you explain the process good 👍 job I have a 2013 jeep Wrangler unlimited jk Sahara 3.6 v6 automatic Has nito grapler tires 35" 12.50 x R20 Black rims ● ||||||| ● here's a jeep wave for you all ✌🖐 Happy JEEPY 😊
Do you know if those capacitors ever go bad? Would that cause the light to work intermittently?
@barryadcock7992
2 жыл бұрын
Same problem here. My one of my headlights works sometimes ( rarely ) , flickers most of the time , & goes completely off occasionally. Need to fix it asap
How much are these?
The original harness that you use to do the first plug in will not go in all the way. Can you help??
@gavingarner8969
7 жыл бұрын
B_Cuss my is doing the same did you happen to figure out how to fix it?
@b_cuss6659
7 жыл бұрын
Gavin Garner I messaged them and they said some years did that, I had a 2008 Rubicon, I just had to push it as far as it would go then use electric tape to make sure it stayed and it worked for me
@gavingarner8969
7 жыл бұрын
B_Cuss okay thank you I have a 2007 Rubicon so I'll see if I can do the same! thanks again
great instructions but for me my light kit did not have the capacitor cable. Also, the kit came with fog light and was regretful this install did not show how to for them. Still, this was an excellent video.
How do you wire up the halo"s ? I wired everything up but my halo's don't work. Thanks
@SuperDusty111
8 жыл бұрын
Michael, The same thing happened to me. I wired everything as described but my Halos would not come on or blink. Did you ever figure out what the problem was? Thanks
@Disagreeoragree
7 жыл бұрын
I was linked to this video for a set of spider eyes, anyways the lights came with a little red wire coming out, inches from the headlight, spiced it hooked up to the middle white wire, that ..go to you front amber signals. So my halos are daytime running lights , I've splice the other white wire to the side markers, allowing them to blink as well
@ukcats5
6 жыл бұрын
Hi, what is the best way to splice the wires? I understand how to splice, but how do you connect them? I was thinking butt connectors, but I don't get how that would work.
Who are the 90 thumbs down people?? This video was so good I think my kids can do this after watching it
@PrecisionLED
3 жыл бұрын
Thanks for the support and for tuning in!
I just installed these but when I turn my High Beams on, the passenger side turns off. Anyone know a fix for this? I have a 2007 Unlimited Sahara.
@PrecisionLED
7 жыл бұрын
Where exactly did you get your headlamps from? The product shown in the video was just a prototype, and we are still working on getting these in our inventory. In short, we do not carry these just yet. However, what you are explaining sounds to be either some type of wiring issue, or possibly just a defective high beam function on one of the headlamps.
@themod0518
7 жыл бұрын
Bought them from XpriteUSA. I thought it might be a defective light. So I sent it back and they sent me a new one. Same issue. For some reason the Passenger Side High Beam refuses to light up. I read some forums and several people have complained about this issue. The only fix I've seen is that someone just used a Convertor on the Drivers Side and not the passenger side. However, because of the cables and connectors they sent me, I don't have that option. So I was hoping someone else would have found a fix for it.
@PrecisionLED
7 жыл бұрын
Thank you for the reply. I do apologize, but we never experienced this issue with our prototype, and because we have not imported this product in our inventory just yet, we do not have much information on them either. However, we will do some research and let you know if we find some type of remedy for this problem. We will keep you posted with any updates.
@sm1zzle798
7 жыл бұрын
Odd question, but what brand/type of gloves are you wearing ?
@themod0518
7 жыл бұрын
I wasn't wearing any. However I did find a fix. Should have posted my results. I only used 1 resister on the drivers side. I left the one on the passenger side off and it works just fine.
mmm, if you live in the salt belt state, all those connections you should load it up with Electronic Grease to keep the water out and stop corrosion !!!!
I don't see where you have these listed anymore ?
@PrecisionLED
7 жыл бұрын
PrecisionLED is currently out of stock on the Jeep Headlight assemblies and those are what I would recommend. If you are interested in going this route, let us know and I can get you on the wait list for the new shipment.
@delete9007
7 жыл бұрын
How much does freight to Sydney Australia cost? I'd like to be put on the wait list too - or know where else I could get these from.
@PrecisionLED
7 жыл бұрын
Yes, we do ship all over the world, including to Aus. We have an international shipping flat rate of 34.99 USD. Also, if you would like to get on the waiting list, please email us at sales@precisionled.com.
Problem is that these Axiom LED / HALO headlights also have connections for daytime running lights and turn singnals... Your video neglected to instruct the install of these features!
What about the DRL
@PrecisionLED
3 жыл бұрын
We have listed the DRLs project from the same light as the high/low beam. This video shows the conversion of the high/low and DRLs. I do apologize if we did not specify that in the video.
what about the ring light?
@PrecisionLED
3 жыл бұрын
What I believe you are referring to is a factory LED.
Cant get bulb out!
@PrecisionLED
3 жыл бұрын
Check out 4:00 in the video where we show how to remove the bulb.
That's a torx bit or driver that you need. A torque wrench should not be used at all in this procedure.
@PrecisionLED
3 жыл бұрын
Thanks for the correction!
You never showed how to wire for turn signal and daytime running lights
Sorry it didn’t work for me. My grill isn’t connected like that.
Yep, LED headlamps have a definite advantage over the OEM halogen lamps. But wait until you have to learn the cost of those LED lamps when they no longer work and require replacement. And the LED headlamps are too bright to my eyes as I visually engage oncoming traffic. Nope, I'll stay with my halogen lamps till they are no longer made!
The entirety of your job is to install hids..but you dont explain installation for the halo drl's..thats sad
@PrecisionLED
8 жыл бұрын
We have listed the DRLs project from the same light as the high/low beam. So this video is indeed explaining the conversion of the high/low and DRLs. I do apologize if we did not specify that in the video.
Didn’t work, sister got pregnant
Awesome video. Thanks
@PrecisionLED
2 жыл бұрын
Thank you for the positive feedback!