Jeep Gladiator Rear Bumper LED Reverse Lights from ORACLE Lighting- Installation Guide DIY
Автокөліктер мен көлік құралдары
www.oraclelights.com/jtrev Not satisfied with the night-time visibility of your Jeep JT reverse lighting? Replace the factory bumper reflectors with high-output replacement auxiliary LED reverse lights from ORACLE Lighting!
This reverse light design seamlessly integrates into the bumper reflector area to provide over 1500 additional lumens when backing up in a Jeep Gladiator. Designed for function and durability, these lights feature an aluminum housing with PMMA lens. These Gladiator reverse lights also maintain the rear reflector function with a scaled-down version integrated into the housing. These compact lights pack a big punch with a total of 30 high-powered LEDs to improve your Jeep Gladiator bumper reverse lights.
Ready to install out of the box, this kit ensures you will have rear visibility in your Jeep Gladiator when it matters! Installation uses factory mounting hardware and these lights tie into the rear light wiring with the included T-taps.
Пікірлер: 75
Great job with the harness. Messing with my factory wiring was holding me back from ordering. Now I'm sold.
@ORACLElights
2 жыл бұрын
Great to hear!
As I type this, waiting for my ordered Oracle Backup Lights to be delivered today! You can never have too much lighting when backing up. These appear to be high quality fixtures.
@ORACLElights
2 жыл бұрын
Right on!
Those Oracle tail lights are kick ass!!
@ORACLElights
3 жыл бұрын
Thank you! More info: www.oraclelights.com/products/flush-taillight-jt
Snuck the new tail lights in this video! Already ordered mine, can't wait to get them.
@ORACLElights
3 жыл бұрын
You spotted them! :)
Looks great, hey, what’s that extra piece around the lens, the metal piece
Great video! I should have payed closer attention to the passenger side overlay text indicating the red goes to white with PURPLE stripe, I had assumed same as on driver side having the Red connect to the white with Brown stripe. Hope this helps someone else to pay more attention to details of passenger side
@zachzach5840
7 ай бұрын
You just saved me a huge headache I was stressing out wondering why it wasn’t working and going crazy thank you!
Very cool.... I am very interested in them
I have an aftermarket all steel rear bumper so not for me BUT...I have the bad ass Oracle tailgate light that turns heads everywhere. You guys have not good but GREAT shit!
@ORACLElights
8 күн бұрын
Thanks! 😎
@EricTheOld
6 күн бұрын
@ORACLElights Oh I'll be buying more from you guys, thank you 😊
Lights look great but why would you have not lead off with the plug and play installation first? There is no tap splices to worry about and installation is clean and quick.
I ordered the Oracle lighting reverse light plug and play wiring adapter along with the Oracle lighting rear bumper LED reverse lights for my Jeep Gladiator and they’re not working. Both the Oracle lighting rear bumper LED reverse lights are plugged into one side. What needs to happen so they work? Can you please let me know? Thank you.
But what I'd we have the rear lights factory and not just reflective?
When does the new tail light ship??
You guys don’t mention these don’t work unless you have the led package from factory!
The top inside bolt is a PITA… but they are Nice!
Im stuck 😩 i have current on 1 cable the other im assuming is ground. Ok my lights don’t turn on. I put a 9v battery 🔋 to see if they worked they do turn on. But when I connect them they don’t turn on. 😅 wht purple line & blk wire (passenger) wht brwn stripe & blk grey stripe (Driver) 🙇🏻♂️🤷🏻♂️
Do you know if these will work if our tail lights have the side sensors? I'd like to get the plug and play kit without the t-taps and was wondering if all that functionality will still work? Thanks!
@ORACLElights
3 жыл бұрын
Yes, designed wot work with the factory sensors, they swap right over to our lights and we include a plug and play connector to connect the sensor.
@thekorky27
3 жыл бұрын
@@ORACLElights thank you!!! I'll put in an order!
I just want these as regular aux lights, operated off a switch (not connected to my reverse lights at all). Would this be possible using the provided wiring, or would I have to chop this up?
@ORACLElights
Жыл бұрын
You would just connect the leads to your aux switch instead of to the reverse lights. Many customers chose to go this route.
After I installed mine, it keeps giving me a dash light warning “blind spot needs to be service” it turns out to be a bad plug n play harness. it was a crappy soldering job. I didn’t even bother to send it back. I just figured it out myself. After cleaning that mess all works as described. If you come across with the same issue with this plug n play harness, just splice open the heat shrink were the 2 wires for the back up light is tapped . Inspect it and make sure they are oriented properly and not touching each other.
@ORACLElights
Жыл бұрын
Hello, really sorry to hear that. We are glad to hear you got it sorted but if there is anything we can do let us know!
I have led taillights from factory but after installing these led flush taillights and bumper led lights only drives side stays on in reverse and sometimes they all come on but go right off I reinstalled my oe taillight on passenger side now that doesn't work as well but did work prior to installing these I don't know what the issue is.
@ORACLElights
3 ай бұрын
shoot us an email info @ oraclelights .com and we can get this corrected for you.
What if I don't want to connect them to my reverse and want to connect them to my fog lights switch instead so I can use them for off-roading?
@ORACLElights
3 жыл бұрын
Yes, you can hardwire them to your fog lights. A few of our customers have done their installation this way for the same purpose you are describing.
placed my order in March for these.. when will they start shipping out?
@ORACLElights
3 жыл бұрын
Hello, thanks for your pre-order. They are slated to begin shipping in mid-May, and any updates will be listed on the product page and emailed to you. You will also receive a notification when your set ships out.
How does the extra light effect the backup cam at night? Does it wash it out?
@ORACLElights
2 жыл бұрын
The additional light significantly enhances the visibility of the rear camera at night. Does not wash out at all.
Hi. I have questions if my car has blindspot feature, will that still fit for my car?
@ORACLElights
2 жыл бұрын
Yes
I used the adapter and I got flashes. Needless to say it didn't work. When I called for support no one knew how to provide support for that. I was pluging the adapter to my JT,WOLFSTORM LED Tail Lights Replacement for my Jeep Gladiator. Will it not work with that type of taillight?
@ORACLElights
2 жыл бұрын
Not familiar with that particular tail light but seems to be a generic Chinese light, good possibility that is the cause of the issue.
I have both the oracle rear taillights and oracle bumper lights. I noticed that the lights come on when in reverse and then shut off. I have the tazer configured to led as my jt came with halogen from factory. Any idea of what I can do? Love the product when it works. T.I.A.
@ORACLElights
2 жыл бұрын
A few things, if you change it to LED on the Tazer you can remove the resistors by unplugging them. With the setting for the tail and reverse light updated in the settings and resistors removed you should be good!
@allanloor7478
2 жыл бұрын
@@ORACLElights that’s how the set up is now. no resistors and set to led and it is still not 100% working all the time. Should I plug in the resistor and see if that’ll be the solution. Idk if the wattage is too much or something running both things. I can send pictures to an email of how I have my truck set up
@ORACLElights
2 жыл бұрын
@@allanloor7478 on the Tazer can you turn off tail light monitoring like you can on the J-Scan? I can try to get more info for you on this.
Is the light so bright or scattered that it washes out the backup camera at night? Thanks
@ORACLElights
3 жыл бұрын
no, it actually greatly enhances the visibility of the backup camera at night.
Plug and play harness works great until I let off the brake. Then all the lights turn off except for my main tail light reverse light. Should have kept the t taps I suppose.
@stickymickey4137
Жыл бұрын
Do you have led lights from factory ?, I don’t and the same shit happens to me
Those would definitely help out what do they cost for a 2020 ?
@ORACLElights
2 жыл бұрын
Check the link in the description for pricing and to order. www.oraclelights.com/jtrev
if it was a car not a jeep the tee bight clips might b fine long term but most jeepers will want your fancy plug & play harness.
@ORACLElights
3 жыл бұрын
There is a very easy drop-drop option to add the plug-and-play harness to an order if desired. Thanks for watching.
Can't find these on the website ?
@ORACLElights
3 жыл бұрын
Link is in the description www.oraclelights.com/jtrev
I think part number is 5880-504 according to their website
@ORACLElights
3 жыл бұрын
5878-504 is the lights only, 5880-504 is the PnP harness only, and 5881-504 is the combo package of the lights and PnP harness both. Hope that helps!
Is there a reason to keep the reflector on there?
@ORACLElights
3 жыл бұрын
Yes, for FMVSS/ "DOT" compliance.
@214steveg
3 жыл бұрын
@@ORACLElights not every vehicle had reflectors....why is it required for this one?
@ORACLElights
3 жыл бұрын
@@214steveg if a vehicle does not have rear reflectors look at the tail light, it will be integrated there.
@214steveg
3 жыл бұрын
@@ORACLElights ,ok..thanks !!
Mine keep giving me problems. When I go on reverse they keep turning on and off.
@ORACLElights
2 жыл бұрын
Do you have factory halogen tail lights?
@rafaelflores6132
2 жыл бұрын
@@ORACLElights yes I do
@ORACLElights
2 жыл бұрын
@@rafaelflores6132 ok, in that case the reverse lights are likely pulling a bit too much power and shutting down the lights. A couple solutions, one is to move the input form the tail lights to the trailer wiring. The other is to replace the factory halogen reverse lights with LED lights. This will lower the load and resolve this issue.
@stickymickey4137
Жыл бұрын
@@ORACLElights I have the Oracle taillights and get similar problems
@tofuman7456
7 ай бұрын
@@ORACLElights I replaced my factory reverse light with LED bulbs now my Oracle LED reverse light doesn't work. Not even 2 months and it doesn't work anymore. I bought the harness with it too. I thought this should be plug-and-play with no issues
Nice lights but I’m not happy with that style connectors.
@ORACLElights
3 жыл бұрын
Keep watching the video we show the plug and play OE style connectors that we offer.
@genebranson3393
3 жыл бұрын
@@ORACLElights Thank You I did see that my fault. I just don’t like the T- connector. I overlooked that part of the video.
@ORACLElights
3 жыл бұрын
@@genebranson3393 we totally get it! We don't like them either but some customers dont want to pay extra for the waterproof molex connector so we offer both options :)
they don't work on my 20 gladiator any one has the same problem