The Leader in innovative LED Lighting Technology. - ORACLE Lighting has been in business for well over a decade with the one goal in mind; delivering the highest quality and most innovative lighting products to our customers at fair prices.
We have received accolades from numerous organizations for our business practices including being listed on the Inc500 list of the Fastest Growing Businesses in the USA for the past 5 years consecutively, winning the 2012 Bronze Stevie Award for Consumer Products Company of the Year, and most recently being named The Small Business Administration's Exporter of the Year and a 2013 Small Business Champion by the U.S. Senate Small Business and Entrepreneurship Committee.
In today's world of fly-by-night vendors we think it is important to partner with businesses that you can trust to be there for you today, tomorrow, and for years to come!
Пікірлер
Really,,,,what about the AUX SWITCH
If you want to connect to your Aux switch connect to the Aux switch cables. There are instructions provided by Ford on how to connect to the Aux switches.
nice video! i bought oracle lighting P# 5876-001 wit 3 pin connector (red wire, yellow wire and black wire) so can you tell me which wire is Hi beam, Low beam and which is ground? else what pin number from 1-3 belong to what color red, yellow and black. this question is because am gonna connect it to 1952 chevy truck. thank you
Hello Red= High Beam, Yellow= Low Beam, Black= Ground. Hope that helps! Please share some photos of your installation with us! info@oraclelights. com
@@ORACLElights yes this is very help full information so i will send you some pics from this installation. another question is do you know a P# for bc1 controller that can be connected to my oracle light P# 5876-001?
👍🏻
Nice job
Thanks 😁
I have an aftermarket all steel rear bumper so not for me BUT...I have the bad ass Oracle tailgate light that turns heads everywhere. You guys have not good but GREAT shit!
Thanks! 😎
@ORACLElights Oh I'll be buying more from you guys, thank you 😊
Love it but I just dislike that it's plugged outside where anyone can just walk up and unplug it. It would be nice if it wasn't visible
Great news, we have a plug-and-play connector that attaches to the back of the 7-Pin to prevent this www.oraclelights.com/products/oracle-lighting-7-pin-trailer-wiring-t-harness-adapter-plug
Why did you decide to not add the vector logo back on the grill? It was part of the reason I purchased it. It’s a void there now that’s not as appealing plus the cost.
The logo in the center of the grill? That was a badge that we included with the first 500 grills that were shipped. It sticks on, we may have one left over we can ship you if you are interested.
Fuck u bro u owe me 100 dollar lights
Is this product on your website? I don't see it when putting this part # in or searching on the Hummer EV. Thanks!
Can I use this on my older version vector grill I have the original and my daylight running lights have been replaced twice and now they are just burnt out again
These DRLs will not fit the older version of the grill but we can get you a new grill for a discounted price. Please email us [email protected] or call us 800-407-5776 to arrange this.
Can they be used in the tow position as well?
Yes they can. 👍
Great thank you. Just an idea but something that could capture the rear for backing up a trailer would be great too.
A Dodge gladiator
Can more than just 3 be connected together?
These are sold in sets of 3 but, yes you can add multiple sets for a different look.
Where else can I tap into. Already tapped in with the side fender lights.
You can tap into the same spot, the LEDs have a very low draw and can use the same circuit with the fender lights.
I bought this. They only work when the door is open. I wanted them to work like the stock puddle lights. I mostly wanted them for the custom lens. There still in the box in the toolbox. They won't fit in the mirror housing and let the mirror adjust. They look good like I wanted but can't use them. Other companys make logos but not the one I want.
Just to be clear, will the 20" lightbar have the ability to have the amber DLR lights as well as the high power white led driving or Offroad lights?
Yes these have Amber and White Clearance Lights standard PLUS the actual off-road lights.
Best video for installing ring lights for an atv..i was stressing cause I didn’t know if they would be able to get installed..😊..What is your opinion.So this is my atv italika 250cc its a japenese atv in mexico..Let me know if its possible please
very misleading video, you complete ignore the PITA push pins underneath which are the primary difficulty
Do you guys do the installations?
Yes, we offer installations at our locations in New Orleans and Houston. You can also ship your lights to us for installation. We also have a list of installers across the USA on our website.
No better way to run wire then over the gasket??
You can also run the cable down the windshield. Many Jeep owners do this with overhead light bars. We prefer not seeing the cable but it comes down to user preference honestly.
I got the pre installed ones and they just aren’t lighting up at all. Very confused
Did you confirm you are getting 12V at the power source? Be sure you have a good solid ground. If you already confirmed you can call Oracle's tech support line, they are very helpful.
@@j_hart_5048 yeah I figured it out I just used a splicer n pigtailed it off of the parking lights🤘🏼 didn’t know you had to do all that but they look fire now
How do get the wire from the interior to the engine bay?
Passenger side firewall grommet. If you have Aux switches no need to go through the firewall, there are leads under the glove box.
@@j_hart_5048thanks
Excellent instructional video! Two years after posting it and you’re still helping our community customize our vehicles. Although this is definitely an easy plug-n-play job I was able to install these lights on my ‘21 Wrangler that much easier. Thank you!
Why ford doesn’t do that
@oracle I’ll test your product for you with an accurate and fair review
Very cool, can’t wait to get ours installed
I received mine yesterday after waiting since January. I’ll have it installed in a few weeks. Unfortunately, they’re not going to warranty their install because of the previous issues they’ve had installing this grill. Hoping for the best and I’m excited to have it to install.
Are the SAE fog lights available standalone?
Why didn't you run it down the driver's side like you did in the intial install video? I have an aftermarket aux switch bix in the engine bay. I am assuming this the wire kit that I will want?
Yes, if you have an aftermarket Aux setup you would use this cable for that as well.
Very helpful video thanks alot...
Can I install these without removing the factory tail light?
Not without ignoring the foundational law of physics.
I ordered the Oracle lighting reverse light plug and play wiring adapter along with the Oracle lighting rear bumper LED reverse lights for my Jeep Gladiator and they’re not working. Both the Oracle lighting rear bumper LED reverse lights are plugged into one side. What needs to happen so they work? Can you please let me know? Thank you.
It's on my list. I have to have it
Tried to find this on the website.....is it released yet?
Not yet, we are releasing it this summer.
@@ORACLElights i would love to see some more photos and what/how the holes are sealed. I have been looking for something that looks like the old Lund clearance light visors that used to be out in the 90s!
1 hour one side …20 minutes the other .. see the other comment
Do you guys have a bracket for FJ Cruiser?
How do you do you hide the wire?
On the interior? It tucks right behind the A-pillar trim.
@@ORACLElights thanks , would have been helpful to show how to do it 😊
How do you control the demon lights and the other lights to be 2 different colors
In this case, the red and blue wires are switches making them 2 different colors.
@ORACLElights are you using 2 different remotes I just bought the demon lights and the u shaped lights for my charger with the 2.0 controller but I don't want them the same color. Is it possible to control 2 lights independently with 1 remote 🤔
@@youngmoney1410 you can use 2 different remotes or just switch the Blue and Red wires when you connect the Demon Eyes to the controller like this customer did. Then you would just use 1 remote.
Thank You for doing this, can't wait to get these products installed on my new Hummer EV. Pre-ordering today!! Part # for roof lights and brackets?
Hello, we will be posting details about the roof light bar very soon!
Love it
I love how clean the amber roof lights look. Well done!
We love it too, thanks!
Thanks not gonna grab a lot of air and turn it into noise, no way, not a chance! 🤣🤣🤣
This was designed with 3D CAE Fluid Dynamics analysis throughout the design process to insure the airflow was optimized to be as quiet as possible while creating the least about of drag. The design process was focused on creating the least amount of air disturbance as possible. When it comes to real-world testing we just returned from Daytona (1,500 mile round trip) and Moab (4,000 mile round trip) before that, this design was as quiet as could be. Zero whistling or wind noise in real-word testing.
Spent almost a 1000 dollars on these lights and controller and have to say the 2.0 which I thought would be best as it cost the most is one of the most disappointing things I’ve ever purchased
Hello, what are you not pleased with on the 2.0 controller?
It won’t connect to any app, also the remote is horrific as it’s a generic remote and nothing is simple on it nor does it let me switch between rings
@@1500mlondon2012 correct, the 2.0 controller is not a bluetooth controller so it is not intended to work with any app. You are also correct that the box can not switch between rings, as demonstrated in the video you would need 3 controllers in order to switch between rings.
Question. With the red clip ons, or T-Tap in this case, do I just wrap it around the wires?
Simply squeeze it gently with pliers like shown in the video to initiate the contact with the wire tap.
that was mannys jeep
Can't find this light on your website....
Coming out soon! Stay tuned :)
nice i like this better than my quadretec
Can I leave just one color as default when I turn on and off the truck
Yes you can 👍
Ive had thos on my mustang for 6 years...never once failed me but over the years some leds doed out so it was now time to upgrade..got the dynamic set this time
App sucks! I am trying to turn off the light but “ My device “ button doesn’t work. Goes on and off.
Hello, be sure you are the only person connected to the app, if another device is also connected it may override your connection.