If you thought this box was cool you’ll love seeing what I did with the custom amp rack, step by step build details in the following 20 video playlist! (Long link since it’s a playlist) kzread.info/dash/bejne/ZZyklLaeaZS0eag.html

I have watched several of your videos. Right now I just have my three amps, dist. blocks, and 6-way x-over mounted on 1/2" mdf with a 1/4" Plexiglas sheet mounted 5 inches above because I also use my Trailblazer for work purposes. But I have gotten many new ideas I'm thinking about trying from your videos to enhance the looks and free up the space for cargo. Thanks dude. You do awesome work.

I love it, looks clean professional like that's how it comes from Jeep, great job.

FINALLY! That looks AMAZING!!!! I can't wait for you to get the sub done now and finish this thing!

love it, i sold my old audiocontrol spectrum analyser when i thought my car audio days were done in 2005, but now I want that new lap top setup since im back in it.

Love it when it all comes together. Great work. Every step was done with meticulous care, and it really shows in the final product!

Holy crap you've been working on this for over a year! Wow!

Looks amazing!!

Awesome Mark, congrats!

You know what you are doing, you are the master

Wow!!!, looks really good. Excellent job, mark

Great work! Looks really good!

Man. You'r work is always so clean an neat! Keep it that way!

Thank you! First time headliner install. Using vinyl. Your vids will help immensely. NICE work. NICE tools. Production value 10++. Subscribed

Fantastic video series, great job and thank you for posting!! 👍

Wow, this build is simply amazing and very pro. Nice work man!

Looks awesome

your work is truly amazing. it’s always interesti g to watch a real profesional at work.

Great build series. learned a lot

Turned out great!

Looks Great! Can't wait to see sub install.

CLEAN AS HELL CUTTY

beautiful job.

looks really good 👍

Looks good mark!

Nice job man, u r my idol.

Looks awesome!!! Great job!!!

@CarAudioFabrication

7 жыл бұрын

+AudioControl thanks for being a part of the build!

Very impressive!

looks clean and stealthy

it came out great Mark. Nice and clean and really pops in the trunk. I look forward to the future builds

Very Nice Work! it looks Awesome. I need you to make mine look as good as this does

Love your videos always great knowledge being shared. I have an idea for the project. Have two 10s or eights pointing down at the amp rack separated with a split down the center. Then to show off the subs and amp they flip up pointing at each other and showing the amp rack. That may be tough for many people but you could totally do it!

NICE! 👌👌👌👌

@CarAudioFabrication

7 жыл бұрын

+SoundmanCA thanks bro

looks awsome :)

Daamn, i have to sub u dude. So Good videos! Nice work, keep it up!

Amazing! Lots of hours and hard work put in right there! Going to try to build a ported box for two kicker solo l7’s here shortly. Hopefully it meets ur standards!?

Damn boy, you got skills, nice

I would suggest making the cover from acrylic that way you can still see it and it would be strong enough to hold common groceries. I love your work man.

I decided to support via patreon. Dude's videos are priceless.

@CarAudioFabrication

7 жыл бұрын

+thornygravy thank you! I appreciate the help

Great job man u r very talented more than most, people can practice all they want, but u have this talent naturallyit seems, keep up the great work and videos man love them!

@CarAudioFabrication

7 жыл бұрын

+Daniel Harrell everyone starts somewhere, just have to have the desire and drive to keep learning! Thanks for the kind words.

Holy shit, this build has been going on for more than a year! I like it though! That amp setup/beauty panel is nice, can't wait to see what you do with the sub!

Good vid

sou do brasil adoro seus videos nao perco um , manda uma abraço ai no proximo video 👏👏👍👍

looks really good nice work

@CarAudioFabrication

7 жыл бұрын

+Harry Seymour thanks!

@harryseymour6886

7 жыл бұрын

CarAudioFabrication I have been following your build vids I have learned a lot from you I look forward to using some of your tips and techniques into the rebuild of my truck system. I am currently running 2 soundstream t5 15s off a Zeus 2000 and my door speakers and midbass satellites off a Zeus 600.4

@CarAudioFabrication

7 жыл бұрын

Awesome man! Glad the videos have helped you out. Sounds like a cool system.

@improject007

7 жыл бұрын

have a Jeep just like that, really curious about the subwoofer build, don't know if you have made a video on that yet or not..but definitely can't wait to see it

@countreekidd

5 жыл бұрын

2019 and I'm just now seeing this series. It does look nice, but if I'm being honest--the trim ring over-hanging the cut-outs along that one side would bother me to the point of redoing it...if I had his skills lol.

That looks excellent. Great contrast and design... and no wrinkles in the vynl. But for a Jeep?

IMO, it looks _ucking awesome

@CarAudioFabrication

7 жыл бұрын

+Paul Gale underscoring awesome!

Whats holding the silver trim ring in? Love your attention to detail and your videos! Thanks!

Hey mark, you may have already answered this in another video, but is there any fundamental reason you went for an AudioControl DSP rather than a 3Sixty.3 (since the build is sponsored by Rockford and all)?

Stack fab enclosure? Cant wait to see you finish up! what a great project! AAA+++ super Yob my friend

@CarAudioFabrication

7 жыл бұрын

+Troy McGrgeor perhaps.... ;)

@Troy_Audi0

7 жыл бұрын

The fit/Finish to the plastic is great better than most shops.. Hope to see you at SEMA this year..

Great job mark! Looks sweet! Do you have any vids on doing the led lighting and mesh work?

@CarAudioFabrication

7 жыл бұрын

Thanks! LED Lighting Video: kzread.info/dash/bejne/fGWA2ZSxc9HIirA.html Mesh Video: kzread.info/dash/bejne/aKWcm82Hlby3qKg.html

the sub would look good in the tailgate. you could somewhat mirror the amp rack beuty panel.

Are you...using Tesa tape to cover a wound in your finger? lol. Awesome work, Mark! I can't even work around with cloth haha. Keep up the good work!

I always start when wrapping a panel with any material in the corners. Then work the wrinkles out from that corner towards the other corners.

Ok, one last question Mark, what did you pay or should someone expect to pay for laser cut or engraved acrylic like you got?

looks great! how did you fasten down the silver trim ring?

@CarAudioFabrication

7 жыл бұрын

Magnets, check out this video: kzread.info/dash/bejne/gZ5426appMvag5s.html

Looks great! Now get that sub in there lol

Hey Mark, led facing up in your vids. Have you had success with this with letters or do you fire the LEDs into the design from sides instead? Just want to know your results from experimenting through the years.

@CarAudioFabrication

6 жыл бұрын

+Vic Orlando I fire from the sides, check out my back lighting video on my channel

@VicOrlando

6 жыл бұрын

I did watch your video but don't recall a side fire. Thanks for reply.

Would the contact adhesive bleed through onto white fabric?

How do you make the led lights follow blink to the beat?

Do not end with cut against a corner. Just make there a little curve. This will prevent from further cracking of material ( upholstery )

Man neon green would have looked really good . Or hit that white with glow in the dark so it glows with the leds

I have a 2007 Chevrolet Tahoe third row seating I want to keep the third row seating could you build me a sub box

Heat issues?

How do you make the lettering on the acrylic?

@CarAudioFabrication

7 жыл бұрын

+airules99 I had it laser etched

@airules99

7 жыл бұрын

And was the acrylic already black or is that a wrap on it

Could you do another car build

How much for this work?

@VicOrlando

6 жыл бұрын

Francisco Javier Guerra Montero thousands usually. These things take so many hours to lay out, design, cut, dry. Materials average a few hundred dollars. $1500-$2k for most projects (starters) all really depends

K, who else came for the Jeep install, and ended up with Router Lessons?.. 😂

I want to hear that sub

hey Mark why ? don't you ever cool your amps????? with all that perfection dont it get hot!!?

@VicOrlando

6 жыл бұрын

chevyboy Flores he doesn't enclose the amps for the most part I'm sure. Most devices operate in the 120 max range before thermal shut off

Been watching this for awhile, just does not belong in a Jeep though. It does look really nice though.

can you make me one, I don't think i will find anyone who can do this.

heat it up mate ?????????????????????????????????????????????????????????????????

First☺