No video

JBL Flip 4 Speaker - Disassembly - Charging Repair

Пікірлер: 26

  • @tomaszrozrusznik4368
    @tomaszrozrusznik43688 ай бұрын

    Dzieki za pokazanie jak wyciągnąć akumulatorek( przyklejony) nie chcialem tego modułu ruszać, a jednak muszę.

  • @vaphe
    @vaphe4 жыл бұрын

    Is it still waterproof?

  • @chekoman571
    @chekoman5714 жыл бұрын

    I need help. I was replacing the battery on my flip 4, the battery wouldn't come out from the top easily so I decided to do it from the bottom. Got a wooden stick with a flat tip to push it out. Before I took the battery it, I connected the new battery to the speakers to make sure it would work and it did. After I pushed the old battery out I placed the new one in and it didn't turn on. I was thinking it was probably a bad connection on the charging port but that wasn't the case when I took it out and reconnected it. Do you have an idea?

  • @dusanrajkovic2887

    @dusanrajkovic2887

    Жыл бұрын

    i have the same problem, what was the solution?

  • @pizsamasdeck1563

    @pizsamasdeck1563

    6 ай бұрын

    You should use some alcohol. Apply a few drops at the battery from the side you want to pull out the battery from. The flip the speaker, and from the side that's manipulated in this video (where some of that alcohol had to have leaked out that you poured in), apply pressure with a stick or something - make sure it's not pointy, so not a screwdriver for example. When applying pressure, you have to stick in the stick basically next to the circuitry that is manipulated in this video, so be careful not to damage it. This may be a lengthy exercise, but the battery will move eventually (thanks to the alcohol) and then you'll be able to pull it out.

  • @NathanThompsonBlueEyes
    @NathanThompsonBlueEyes Жыл бұрын

    I feel like if this is the type of music you listen to, you should just scrap your flip 4.

  • @MrEbanks
    @MrEbanks4 жыл бұрын

    What's the symptoms of this problem, like what happens that you're repairing this?

  • @MaciejK333

    @MaciejK333

    3 жыл бұрын

    He is not charging - i have the same problem. There is shorted circuit between red and black wire

  • @judahwatcher1140

    @judahwatcher1140

    2 жыл бұрын

    @@MaciejK333 Hi ..I dont have spare usb port so could I connect positive and negative wires to red and white wires and charge it .. And then leave the two wires out to charge ..I can just connect them when I need to charge

  • @Itsme83.
    @Itsme83.2 жыл бұрын

    What’s the small plug on the circuit board that has only a black and red wire?

  • @JBLFAN853FUR

    @JBLFAN853FUR

    2 жыл бұрын

    The microphone wire

  • @datuelthonpanditajr.8677
    @datuelthonpanditajr.86773 жыл бұрын

    Help me, my JBL isnt working. i charge it but no function. the lights arent working even if i charge. whats the problem. thankyou respect

  • @angelrios6694
    @angelrios66944 жыл бұрын

    Where would I get parts for my flip 4?

  • @ddpp3492

    @ddpp3492

    4 жыл бұрын

    Online on ebay but u cant find some parts

  • @paquitoperez2116

    @paquitoperez2116

    2 жыл бұрын

    Try the local grocer or maybe the chemist near the McDonald...

  • @angelrios6694

    @angelrios6694

    2 жыл бұрын

    @@paquitoperez2116 your mom had everything I was looking for and then some!

  • @kakcibaza4432
    @kakcibaza4432 Жыл бұрын

    lutowanie takim gwoździem XDXDDXDX japierdole

  • @ddpp3492
    @ddpp34924 жыл бұрын

    Song?

  • @SrinivasAllam-xe7np
    @SrinivasAllam-xe7np10 ай бұрын

    JBLFLIP4BUTTONSARENOTWORKING

  • @nf0vkix093
    @nf0vkix0932 жыл бұрын

    Papap

  • @przemysawziokowski1299
    @przemysawziokowski12992 жыл бұрын

    co za gówno nawet dymka nie poszło jak cynę przyłożyłeś... że już nie wspomnę że takie rzeczy robi się pod lupą bardzo precyzyjnie a typ przyłożył lutownicę wielkości męskiego czarnoskórego przyrodzenia :D ludzie nie sugerujcie się tym filmem chyba że chcecie sobie głośnik rozpierdolić na amen typ przyłożył zimną lutownicę widać to od razu

  • @RobertLajk

    @RobertLajk

    2 жыл бұрын

    Twoja wypowiedź jest żałosna, a jeśli chodzi o typa - to Cię zrobił

  • @przemysawziokowski1299

    @przemysawziokowski1299

    2 жыл бұрын

    @@RobertLajk idź poskarżyć się mamie. Żałosny to jest ten filmik.

  • @RobertLajk

    @RobertLajk

    2 жыл бұрын

    Skoro tak twierdzisz :)

  • @tomaszrozrusznik4368

    @tomaszrozrusznik4368

    8 ай бұрын

    Chodzi o pokazanie jak to naprawić,a nie o dym z lutownicy dużo filmików jest robionych w ten sposób.