No video

JB Turbo Setup 30,000km Review [Turbo 1HZ Inspection and Review]

In this video I will go through my entire turbo 1HZ setup, and discuss how it is performing today, how I maintain and look after a journal bearing turbo, and answer any questions you guys have thrown at me regarding the turbo conversion!
More specifically, I will cover:
- Why I turbocharged my 1HZ in the first place
- The cost of the complete conversion
- Everything you need for a 1HZ turbo conversion
- My gauge setup
- How to maintain a turbocharged diesel (journal bearing)
- 0-100kph test
- Blowby inspection
Thanks to everyone who posed a question around my turbo setup- YOU'RE the reason this video exists. So thank you, and if anyone has further questions, find me in the comments below! Or on Instagram and Facebook :)
CHECK OUT THE WEBSITE:
For all your merch and switch panel needs:
www.willslandcruisermods.com.au/
BUY VICOFFROAD PRODUCTS: vicoffroad.sjv.io/Qy5LJ3
SEE MORE ON MY SOCIAL MEDIA:
Instagram: wills_landc...
Facebook: / willslandcruiser
DISCLAIMER:
This video is for entertainment purposes only. I am not a professional and have no specialty training in the fields shown throughout this video. I take no responsibility from any repercussions from potentially false or misleading information provided in this video. To complete any of the jobs, procedures or vehicle upgrades shown in this video, please see your local mechanic.

Пікірлер: 70

  • @franknalej6492
    @franknalej64922 жыл бұрын

    CT 26 IS T4

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Cheers I’ll pin this comment if you’re sure 🤙

  • @jasonmcneil3902
    @jasonmcneil39022 жыл бұрын

    Finally did this to my 1HZ after contemplating for around a year, didn't want to lose the reliability but needed a bit more berries. I went with the DTS Turbo, HPD front mount, 3 inch exhaust, catch can, redarc gauges and dyno'd, went from 79hp to 128hp running at around 14psi. I did a drive in drive out costing just under $10k, after having her for 14 years and costing me nothing, thought this wasn't too bad. Absolutely stoked with it and glad I made the decision to do so, she only has 225,000k's on the clock so should be good for another few 100k's as you said with kept up maintenance and regular oil changes. Great Vid Mate 👍

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Love to hear stories like this mate! It does make a lot of difference and they’re a lot more fun to drive with a bit of get up and go to them! I’m glad I could be of help in the decision making process 👍👍

  • @davetunbridge6637
    @davetunbridge66372 жыл бұрын

    G’day Will, had my 1HZ 105 turbo’d at about 130k ish by Berrima Diesel around 18yrs ago. Ran around 8-10 lb boost. Loved it after driving it N/A. Did a head gasket at about 360k ish (long story) but when the head came off we found micro cracks in the piston crowns. Decided on a full rebuild cause I love the old girl and I own it. Went with a turbo upgrade kit which is basically from the 1HZ-T that was in the coasters in Japan (so I’ve been told). It consists of pistons with thicker crowns, bigger gudgeon pins and thicker conrods. I had the pistons ceramic coated for good measure. Along with a new oil pump, water pump, new head, alternator, 3inch exhaust, catch can, and a few other sundry items it’s purring like a kitten. Runs about 13-14 lb boost. Looking at fitting the cross country large intercooler with a 79 series style bonnet scoop from CT custom repairs in Charters Towers. Had an upgraded gearbox from 360 gearboxes in Melbourne fitted a few years ago along with a heavy duty clutch, the box is an exchange item designed for towing. Yours is a nice rig, keep it simple and it’ll las t forever. 😎👍

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    That sounds like a beauty of a rig you’ve got going on there Dave! Nice work! Love to hear stories like this about people putting in the work and taking pride in their cruisers. I hope it serves you well for a very long time!

  • @jiggs509
    @jiggs5092 жыл бұрын

    Thank you for your video man, I’m looking to turbo my 1HZ 81 here in the USA

  • @Antons19891
    @Antons198912 жыл бұрын

    Hi there Will, another great Video mate, clear and concise and just tell it how it is with your experience so far. Keep your video's and information coming. Thanks for your time mate

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Cheers for the kind words Anton!

  • @jaredcollins4907
    @jaredcollins4907 Жыл бұрын

    Great video, I just fitted a DTS kit to mine and the drive ability is so much nicer now Running 10 psi and it’s been faultless (only been a few weeks though) I’m yet to fit and EGT gauge to check that but for now it runs perfect and is the best thing I did to my 105

  • @mrropey
    @mrropey2 жыл бұрын

    Good stuff will keep them coming 🇦🇺👍👍👍

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Thank you! 😊

  • @Asbestosfiber6
    @Asbestosfiber62 жыл бұрын

    Love your videos, can you please do a video on what to look out for with 105's buying second hand?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Cheers for that! And that’s definitely a video I could work towards in the future!

  • @RyanW589

    @RyanW589

    2 жыл бұрын

    Keep in mind Zach that the 105 has the same if not slightly different to an 80 series chassis and drivetrain

  • @Asbestosfiber6

    @Asbestosfiber6

    2 жыл бұрын

    @@RyanW589 ohhh yes good point

  • @HTrntrs
    @HTrntrs Жыл бұрын

    U've got a taste bro.

  • @the.wazman
    @the.wazman2 жыл бұрын

    I blew my JB Turbo on my last Cape Trip. They were a nightmare to deal with and I'll never use them again. I'm glad you had a good run with yours. But for towing this thing failed #BAD.

  • @petergreenwood4005

    @petergreenwood4005

    2 жыл бұрын

    JB turbos are a ticking time bomb apparantly

  • @bigfellasydney6970
    @bigfellasydney6970 Жыл бұрын

    Thanks for sharing. I was wondering where you get the 3 gauge piece/rail arm? It really keeps things neat

  • @WillsLandcruiser

    @WillsLandcruiser

    Жыл бұрын

    4x4 concepts make the pillar pods

  • @MrMeatFag
    @MrMeatFag2 жыл бұрын

    Just bought a turbocharged 105 for 4k 😅 granted all the pistons are cracked from overheating, but 1k for a rebuild kit and a quick hone and she'll be sooting again in no time

  • @bradpope7913
    @bradpope79132 жыл бұрын

    Nice work bro, I’ve done the exact same kit on my 1hz troop carrier but no intercooler yet. Just wondering if you added a resonator or muffler to the Ppd 3 inch? Thanks for your help

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Just the resonator, no muffler. I love the sound of it!

  • @FiangonanaMahamasina
    @FiangonanaMahamasinaАй бұрын

    This was a great video. I live in Madagascar and want to add a turbo to my 1hz. Do you have a link where I can order it? Thanks for the informative video.

  • @brettferguson1483
    @brettferguson14832 жыл бұрын

    Great video . I’ve done the same to my 1HZ but still concerned about cracking cylinder heads albeit have all the mods and EGT gauge . Thinking of doing a 1HDFT conversion and not the FTE because of electronic fuel injectors Wanted to know whether you’d considered this ?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    As long as the EGTs stay pretty cool and it’s not pushed too hard, damage shouldn’t really be present- and cracked cylinder heads are pretty rare in these things. You’re more likely to crack a piston. It’s all risks for sure but if you get a safe tune you can minimise those risks. Funny you mention the FT, as I am currently building an FTM (mechanical FTE) and I’ll have videos on this conversion as soon as my back comes good and I can start funding it again!

  • @badaz2639
    @badaz26399 ай бұрын

    Love the video mate?? New to the 105 series and love it, i have the same setup and but as you know the jb turbos do not have a good rep and i was just wondering do you know if any other turbo can bolt straight on to the jb setup??

  • @WillsLandcruiser

    @WillsLandcruiser

    9 ай бұрын

    Not 100% sure but pretty sure UFI and G turbo both have similar if not the same flanges

  • @jamesmclennan3618
    @jamesmclennan36182 жыл бұрын

    Awesome video, so stock injectors and pump??

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Cheers for that! And yep stock injectors newly reconditioned, stock pump 500,000km old

  • @wsw4204
    @wsw42042 жыл бұрын

    Hey mate where are you getting your oil pressure from?

  • @federicooddone1997
    @federicooddone19977 ай бұрын

    Hi mate! Great channel! Is your 1hz Turbo still alive?

  • @WillsLandcruiser

    @WillsLandcruiser

    7 ай бұрын

    Yes it’s still cruising at this point! 😎

  • @76Bushy
    @76Bushy2 жыл бұрын

    Nice vid mine hits 100 in 3rd cowboy tuned 10 year old dts . Upgrade your airbox . Factory one is dog doo

  • @paulblanch8325
    @paulblanch83252 жыл бұрын

    What do you think guys. I have a 105 with 300k. Need more power to tow van. What do I do

  • @AJScunjurong
    @AJScunjurong Жыл бұрын

    With a conservative boost, say 7 psi, and not flogging the landcruiser when driving, do you reckon it will still get 700k plus kms out of an engine, like a unmodified 1HZ engine? Thanks

  • @ripin4x481
    @ripin4x4812 жыл бұрын

    Why don’t you attempt to get a compensated pump?

  • @benmackenzie6347
    @benmackenzie6347 Жыл бұрын

    Hi Will, what do your Water temps sit at at highway kms? Ive got pretty much the same build as yours except i did a front mount intercooler. Sits at 95degrees when over 100kmph. Not sure if thats too warm or not. Cheers

  • @WillsLandcruiser

    @WillsLandcruiser

    Жыл бұрын

    Hey Ben, wish I could be more helpful but I am still using the factory water temp gauge so I can’t give you a figure sorry! The gauge sits a bit under half way and I’ve never seen it rise- but who knows how hot that is!

  • @arielmatias9060
    @arielmatias9060 Жыл бұрын

    Hello, my name is Ariel, I am from Argentina, I have a Toyota Coaster made into a motorhome, I travel a lot to Patagonia and I have many climbs and the torque is not enough. I bought a turbo and I am starting to modify it. Is it necessary to put a TPS on the diesel pump? Or just giving it more diesel is it okay? I only think give it 0.5kg of pressure, does this compromise the reliability of the motor a lot? Thank you

  • @eliteones5194
    @eliteones51942 жыл бұрын

    Do you have AC with turbo?

  • @joseph8852
    @joseph88522 жыл бұрын

    For 5k do you really think it’s worth it will? Or would you maybe hold off save up another 5k ( give or take a few k) and buy a 1hdt or 1HDFTE and drop it in

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    I guess it depends how far you wanna go. For 5k you can have a lot of fun and I know you can tune them to make a lot more power than I’m making but 5k and a conservative tune will last you and you’ll enjoy it. If you’re power hungry or want something that’s really going to make reliable torque, an FTE is definitely a good idea. However you’re looking at closer to 15k for an FTE once you take into account accelerator pedal, ECU and loom. And then to make more power from an FTE you’ve got mods to do to that as well. So it’s just a matter of how far you wanna go

  • @lakhjitbirdi4500
    @lakhjitbirdi45002 жыл бұрын

    Hey Mate. I had question with the turbo. Its designed to run at 12psi. When you set it at 10psi initially did it run ok? I intend to set it at 10psi. I do have the intercooler with the kit was just wondering how it ran at 10.

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Hey there, yes so I was running it initially at about 8/9psi. It was obviously better than stock, but no real power increase before the tune obviously. Fuel is what will give you more power, and the turbo is just a tool to safely add more fuel by keeping the mix right. JB Turbo recommend you run it at 14psi, and I would recommend that too, but there didn’t seem to be much of an issue running it at 10. You’ll likely see slightly higher EGTs and won’t be able to tune it quite the same

  • @lakhjitbirdi4500

    @lakhjitbirdi4500

    2 жыл бұрын

    @@WillsLandcruiser thanks for that. We have another variable of altitude where I am so it will be an interesting tune

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    @@lakhjitbirdi4500 Yeah okay that will be interesting. All the more reason to have a turbo! Keep an eye on those AFRs when you tune it and watch the EGTs post tune and you’ll be alright

  • @paulmontagner6360
    @paulmontagner63602 жыл бұрын

    With the 33s now fitted your speedo would be out of calabration by 10 kms take that into your data so time it to when ypur reach 90 kms its much quicker !

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Yes so it’s about 5% out which means at 100, I’m actually doing 105, at 50, I’m actually doing 52.5, etc. so I possibly was a little late on that call. On 31s, I could get to 100 in 15 seconds. Definitely an impressive improvement from NA! :)

  • @benelenium6648
    @benelenium66482 жыл бұрын

    I hear you have a squeaky accelerator too!

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Squeaky accelerator and clutch 😂😂

  • @jonathanbesterwitch5403
    @jonathanbesterwitch54032 жыл бұрын

    What were the dyno results mate?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Check out that video I have on getting my 105 tuned. I go over both sheets in detail there 👍

  • @dieselrules7912
    @dieselrules79122 жыл бұрын

    How much power and torque? Is there any shift in phase of the peak torque?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Peak torque pretty consistent before/after the tune at about 2100 revs. Now making 325nm and 85kw at all 4 wheels. Very conservative tune for reliability and longevity, obviously it is possible to get more out of a 1HZ than this

  • @RichieHProductions
    @RichieHProductions2 жыл бұрын

    paint looks shmick for 500 thousand, has it had a respray?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Thanks! The rest of the car actually has 630,000 on it (long story), but no respray! Just been well looked after. Mind you there are some small surface rust spots, nothing major though

  • @oldluxy
    @oldluxy2 жыл бұрын

    Will a 1hz N/A all loaded up as a tourer still sit on 110kph?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Yes absolutely! Give it a hill and that might be a different story 😂. They get up to speed, just take their time. You just gotta pretend you’re driving a truck and not be in a hurry to get up through the gears :)

  • @angryman3317

    @angryman3317

    Жыл бұрын

    Only on a dead Flat Road driving with the Wind, 😅

  • @danielcraig6550
    @danielcraig6550 Жыл бұрын

    Whereabouts did you buy the kit

  • @WillsLandcruiser

    @WillsLandcruiser

    Жыл бұрын

    Unfortunately Eclipse turbos/JB turbo have recently gone out of business and you can’t buy their turbo kits anymore

  • @bensparks9467
    @bensparks94672 жыл бұрын

    Where did you get the SA landcruiser sticker from?

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Go look them up on Facebook! Not sure if Ben is still making them or not but there’s a great little Facebook group for south Aussie cruiser owners!

  • @bensparks9467

    @bensparks9467

    2 жыл бұрын

    @@WillsLandcruiser cheers. I’m already a member on there. I’ll have to ask!

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    @@bensparks9467 yes do that! Give Ben Cottle a tag or a PM 🤙

  • @bensparks9467

    @bensparks9467

    2 жыл бұрын

    @@WillsLandcruiser is yours the large or larger size?

  • @mattnicholls1190
    @mattnicholls11902 жыл бұрын

    ILLEGAL PILLAR POD HAHA

  • @WillsLandcruiser

    @WillsLandcruiser

    2 жыл бұрын

    Only if ya get caught 😂