I remember the days when I first started my tree company, I had a 6*10 dump trailer with this like orange dk2 6in chipper. Those were the times. I miss them sometimes as they were peaceful
@larryconn9430
3 ай бұрын
I’m living that rn bro, kinda heaven tbh
@thegamingkid783
3 ай бұрын
@@larryconn9430 just bought my chip truck to. Got a 6in chuck and duck following behind it now. From humble beginnings 1 year ago
@NicoG-oj9bh5 ай бұрын
i know these machines say they can chip up to 4 inch diameter but what would you say is the largest diameter branches you can feed into this thing comfortably without jamming it
@aunabreslingaming3279
5 ай бұрын
It looks like it'd take about 10x that but sounds like it's suffering for torque
@m42deg Жыл бұрын
I have one of these with a HF 22hp engine and it chips well.
@cameronmundell7190
Жыл бұрын
I’ll bet! Thanks for watching!!
@marcshields3677
Жыл бұрын
Where did you get it? I thought they only made them with up to 14 hp engines…. Is it an older one or something?
@m42deg
Жыл бұрын
@@marcshields3677 I got a engine from Harbor Freight, I had to modify the tensioning and belt size for the new engine. Now the engine is bolted to the frame, and tension is controlled with a tensioner pully and spring. Next time I have it out I will make a video on it. I still have the new 13hp engine for a project lol.
@ItsJoseVlogs
Жыл бұрын
@@m42deg Please make more videos of how it’s working.. I’m about to order one right now!
@tobygloriakitt9267
Жыл бұрын
@@marcshields3677 I’d like to see this setup as well
@montanawhite56999 ай бұрын
How long does a chipper like this last? Is yours still working?
@sgr6258 Жыл бұрын
What is this thing like for towing, is it stable? It kinda looks like it'd be a bad combination going around a corner and over a pothole, like it would tip over.
@cameronmundell7190
Жыл бұрын
This model is for off road use only but they do have another model built for towing on road. That being said, towing it around with a 4 wheeler or tractor works great!
@JustinNelson-kx7qy Жыл бұрын
How much was it? And where did you get it?
@cameronmundell7190
Жыл бұрын
It’s currently $2249 at jansenusa.com
@RaghuH-sw4dx3 ай бұрын
I want mechine
@dave_reckless Жыл бұрын
When I eat Taco Bell
@Kushert Жыл бұрын
Where's the safety bar on that death trap
@cameronmundell7190
Жыл бұрын
Good question, you could contact the manufacturer if you’re concerned. 😀
@Kushert
Жыл бұрын
@@cameronmundell7190 Just be careful friend. I've had a glove get hooked and caught while feeding a big vermeer chipper and it was a scary feeling but I pushed the bar to neutral then reverse. The thing is when your close enough to reach the safety bar your not to far from getting chopped to pieces. A chipper is unforgiving and must be respected. Everything happens fast.
@cameronmundell7190
Жыл бұрын
Agreed. I’m unsure why this model doesn’t have a bar. Thankfully I’ve never needed one.
@marcshields3677
Жыл бұрын
@@Kushert these little chippers are nothing like a Vermeer.
Пікірлер: 26
I remember the days when I first started my tree company, I had a 6*10 dump trailer with this like orange dk2 6in chipper. Those were the times. I miss them sometimes as they were peaceful
@larryconn9430
3 ай бұрын
I’m living that rn bro, kinda heaven tbh
@thegamingkid783
3 ай бұрын
@@larryconn9430 just bought my chip truck to. Got a 6in chuck and duck following behind it now. From humble beginnings 1 year ago
i know these machines say they can chip up to 4 inch diameter but what would you say is the largest diameter branches you can feed into this thing comfortably without jamming it
@aunabreslingaming3279
5 ай бұрын
It looks like it'd take about 10x that but sounds like it's suffering for torque
I have one of these with a HF 22hp engine and it chips well.
@cameronmundell7190
Жыл бұрын
I’ll bet! Thanks for watching!!
@marcshields3677
Жыл бұрын
Where did you get it? I thought they only made them with up to 14 hp engines…. Is it an older one or something?
@m42deg
Жыл бұрын
@@marcshields3677 I got a engine from Harbor Freight, I had to modify the tensioning and belt size for the new engine. Now the engine is bolted to the frame, and tension is controlled with a tensioner pully and spring. Next time I have it out I will make a video on it. I still have the new 13hp engine for a project lol.
@ItsJoseVlogs
Жыл бұрын
@@m42deg Please make more videos of how it’s working.. I’m about to order one right now!
@tobygloriakitt9267
Жыл бұрын
@@marcshields3677 I’d like to see this setup as well
How long does a chipper like this last? Is yours still working?
What is this thing like for towing, is it stable? It kinda looks like it'd be a bad combination going around a corner and over a pothole, like it would tip over.
@cameronmundell7190
Жыл бұрын
This model is for off road use only but they do have another model built for towing on road. That being said, towing it around with a 4 wheeler or tractor works great!
How much was it? And where did you get it?
@cameronmundell7190
Жыл бұрын
It’s currently $2249 at jansenusa.com
I want mechine
When I eat Taco Bell
Where's the safety bar on that death trap
@cameronmundell7190
Жыл бұрын
Good question, you could contact the manufacturer if you’re concerned. 😀
@Kushert
Жыл бұрын
@@cameronmundell7190 Just be careful friend. I've had a glove get hooked and caught while feeding a big vermeer chipper and it was a scary feeling but I pushed the bar to neutral then reverse. The thing is when your close enough to reach the safety bar your not to far from getting chopped to pieces. A chipper is unforgiving and must be respected. Everything happens fast.
@cameronmundell7190
Жыл бұрын
Agreed. I’m unsure why this model doesn’t have a bar. Thankfully I’ve never needed one.
@marcshields3677
Жыл бұрын
@@Kushert these little chippers are nothing like a Vermeer.
@ItsJoseVlogs
Жыл бұрын
@@marcshields3677 What you mean?