JALTEST CASE STUDY | Calibration of the Volvo I-Shift gearbox not installed in the vehicle
Автокөліктер мен көлік құралдары
In this new Jaltest Case Study, we show you how to carry out the diagnostics, calibration, and repair with Jaltest of an I-Shift gearbox outside the vehicle, after having replaced its internal components.
This calibration allows the control unit to set and record the values of the splitter and range shift cylinders which are responsible for gearing the different speeds of the gearbox.
The main advantage of performing this operation before installing the gearbox on the vehicle is the time saved if a fault is detected during the calibration process.
Besides, there are specialized customers in the repair of this type of system, who are supplied with gearboxes without the need to have the vehicle in the workshop itself.
Once again, Jaltest provides the workshop with the necessary tools to carry out the diagnostics process as quickly and efficiently as possible.
#JaltestCaseStudy
Пікірлер: 35
Спасибо за русский перевод ! Третий год с Джалтест работаю, доволен, рекомендую
@jaltest
2 жыл бұрын
Thank you very much for your feedback!
Побольше таких видео!
@jaltest
2 жыл бұрын
Thank you for your feedback! Stay tunned!
Keep up to great work on the videos
@jaltest
3 ай бұрын
Thank you!
Great explanation as usual.Thank you! There is a question according to this case study: many years when I performing gear box calibration on Volvo in some cases I can't find the transmission code. So I'm choosing that one which often use on other trucks. So, I didn't notice any difference between them. Please shortly explane what is a difference and how important to choose correct unit when doing calibration job. Thanks in advance. Edward #autodeducton Russia
Hi. Can you tell me if this will work on the new transmissions ATO2612F? I have the old connector and I am guessing maybe the new Ishift models maybe use another datalink to calibrate??? not sure. I went to a customer to program TECU, calibrate, install new trans, calibrate clutch. MACK. calibration fails due to communication immediately every time i begin the calibration. My gearbox break out harness is 88890206. new break out harness is 88890284. I guess I am asking if the new one has DL1 or DL9 because my tool only has DL 2 on pins 6 and 14 of the 16 pin connector. and would the other datalink be used for calibrations? I am able to do ATO2612D calibrations and have done F calibrations in the past. but maybe this is a newer one than before?
@jaltest
3 ай бұрын
Hello! 👋🏼 To receive technical assistance, please contact your dealer or use the "Jaltest Feedback" button of the software to report the problem directly to the Jaltest team. Thank you!
I have purchased new jeltest scanner but i have not received this type interface plz suggest me form india
@jaltest
3 ай бұрын
I'm sorry to hear about the inconvenience. For assistance with your Jaltest scanner interface in India, please contact your Jaltest distributor. They will be able to help you resolve the issue and ensure you receive the appropriate interface for your scanner. Thank you for choosing Jaltest, and we apologize for any inconvenience this may have caused.
Is the jatest adapter necessary or can I use the nexiq usb link 2?
@jaltest
2 жыл бұрын
Hello! To use the Jaltest Diagnostics software you need the Jaltest Link, the cables from our kit and accessories.
Can I calibrate a ZF eco life transmisión when I change the fricción plates with jaltest
@jaltest
2 жыл бұрын
Hello! 👋🏼😊 Are you a Jaltest user? If you need technical support, please contact your distributor. Thank you!
Sir please teach me how to calibrete APM air drier volvo... Thanks
@jaltest
2 жыл бұрын
Hello! 👋🏼😊 Are you a Jaltest user? If you need technical support, please contact your distributor. Thank you!
Can you please take a vedio on how we calibrate a transmision installed in the vehicle
@jaltest
Жыл бұрын
Hello! thank you for your comment. We will take note of your proposal for the future!
Здравствуйте! Подскажите по лицензиям? Как часто приобретать?
@jaltest
2 жыл бұрын
Здравствуйте! Пожалуйста, оставьте нам свой запрос на сайте www.jaltest.com/ru/kontakty/, и мы свяжемся с вами как можно скорее. Спасибо
But problem not resolve right now
@jaltest
Жыл бұрын
Hello! Please contact your distributor if you need technical support. Thank you!
To connect it ishift transmission ATo2612F version which pins we need to connect it??
@jaltest
3 ай бұрын
Hello! 👋🏼 To receive technical assistance, please contact your dealer or use the "Jaltest Feedback" button of the software to report the problem directly to the Jaltest team. Thank you!
Boss can you help me ,I calibrate the transmission Volvo Ishift I'm using jaltest 22.1 but error is torque not set how to solve this
@jaltest
3 ай бұрын
Hello! 👋🏼 To receive technical assistance, please contact your dealer or use the "Jaltest Feedback" button of the software to report the problem directly to the Jaltest team. Thank you!
Communication error shown in v9 Error 004
@jaltest
Жыл бұрын
Hello! Please contact your distributor if you need technical support. Thank you!
We have lot of issue in jeltest
@jaltest
Жыл бұрын
If you need support, please contact your distributor. In case your distributor does not solve your problems, please contact Jaltest through this form jaltest.com/en/contact/ Thank you.
I am a youtuber from india
@jaltest
3 ай бұрын
That's awesome, Akbar!
Prix
@jaltest
3 ай бұрын
Salut ! 👋🏼😊Si vous souhaitez plus d'informations sur le prix ou les fonctionnalités de Jaltest Diagnostics, veuillez cliquer sur www.jaltest.com/fr/contact/. Si vous avez besoin de support technique, veuillez contacter votre distributeur. Merci !