Jaguar XF Blind Spot Mirror Upgrade

Автокөліктер мен көлік құралдары

Get in touch: youtube@ashrowland.com
In this video I finish the installation of the blind spot radars and then program them in using Jaguar SDD.
Check out the first video where I install the actual mirrors:
• Jaguar XF Door Mirror ...
And here is the following video where I upgrade the puddle lights:
• Upgrading Jaguar XF Do...
This is not a tutorial and if you follow anything in this video you do so at your own risk. I accept no responsibility for any damage done to your car as a result of you recreating events seen in this video. This video is purely for entertainment purposes and shows how I did the install and not how you should do it. I strongly advise you ask a Jaguar specialist to do the coding and don't attempt to do it yourself.

Пікірлер: 19

  • @owenkerr2103
    @owenkerr2103 Жыл бұрын

    This would be great if I had a Jaguar XF

  • @chrisjeffries8167
    @chrisjeffries8167 Жыл бұрын

    Thank you for explaining the link for the wiring loom as I am going to fit power fold mirrors thank you excellent video

  • @AshRowland

    @AshRowland

    Жыл бұрын

    No problem and thanks for watching 👍 good luck

  • @aman113
    @aman1139 ай бұрын

    Luckily mine is a 2016 model year XF and has these detection and they help a lot during rain and poor visibility.

  • @Jaguar_XF-S
    @Jaguar_XF-S10 ай бұрын

    I have a 2009 XF S 3.0d portfolio model which is pre face lift and mine came with blind spot detection fitted and acc

  • @AshRowland

    @AshRowland

    10 ай бұрын

    Lucky you! I had to fit them 🤣

  • @Jaguar_XF-S

    @Jaguar_XF-S

    10 ай бұрын

    @@AshRowland 🤣🤣

  • @leer5858
    @leer58582 ай бұрын

    Thanks, this video is very helpful. Do you know if the xml file will need editing on a car that had this fitted at the factory? I have an issue with my BSM on xf x250 and I swapped the radar that it flagged as faulty but will need follow what you did in ssd. I do already have the software and used to it deactivate the BSM to remove the warning until I can hopefully fix it.

  • @AshRowland

    @AshRowland

    2 ай бұрын

    It depends if the modifications you've done to the software in the past have removed the txt in the xml file. They shouldn't have but if they have then you'll just have to copy and paste the information from an xml file that does have the information if that makes sense

  • @Mrted20886
    @Mrted208865 ай бұрын

    Great vid,have the same issue trying to trick the car into thinking as built issue.what commands go where?.

  • @AshRowland

    @AshRowland

    5 ай бұрын

    I can't remember now it was a while ago... Might be worth getting a JAg specialist to do it for you, I remember being scared 🤣

  • @corneliusevans
    @corneliusevans2 ай бұрын

    Hi again, so i purchased and installed the folding mirrors and i also got the blind spot modules. I was wondering what and how did you modify the file to get the modules to work correctly?

  • @AshRowland

    @AshRowland

    2 ай бұрын

    I remember it being a massive pain and it was tricky as the software kept replacing the file I was trying to over-write... find a Jaguar specialist who can do this for you as so much can go wrong when making these sort of changes

  • @stego3212
    @stego32127 ай бұрын

    From where can I buy all the stuff (monitoring system and side mirrors)?

  • @AshRowland

    @AshRowland

    7 ай бұрын

    eBay is your best bet

  • @lolphil
    @lolphil11 ай бұрын

    Does it all work and worth it then?

  • @AshRowland

    @AshRowland

    11 ай бұрын

    Yes and Yes!

  • @benjones1180
    @benjones11809 ай бұрын

    How did you get sdd?

  • @AshRowland

    @AshRowland

    9 ай бұрын

    I bought a laptop with it pre-installed from eBay, which also came with a Mongoose cable

Келесі