Your welcome! I'm retired these days, but I was a welder/fabricator. From experience I complement you. Attention to detail is everything, it makes the job. Well done!

It's very nice to see quality workmanship and using good equipment and new materials. Some welding videos you see, on KZread, they use rusting metal, which isn't cleaned first, then they have a car balancing on what ever they made normally wearing a pair of flip flops.

Excellent fabrication work from beginning to end!! This is what I need for my 4X4 !

Is everybody in Finland as precise as you? Wow! You did an amazing job!

3 жыл бұрын

Thanks. Here is more countryside than urban cities. Past days people have needed to learn to make things by themselves. Even that, now there is online stores, making nearly everything by yourself has become more like an a tradition, than actual need. Finns just don't buy, if they can make it. ( ones living in the country side )

It is nice to see the quality of your projects and the neat way of working.

4 жыл бұрын

Thank you.

Nice welding (even the arc welds were really nice ) and lovely music ,most people put the most irritating head smashing music.. I can watch a video for 10 hrs with this type of music and feel focused and calm afterwards .. TY!

I 've been viewing the playlist, was amazing creative ideas. You welded very tedious and with a nice arc.

Another great build and a great video. My knees are still hurting watching you. I have the same sort of gravel in my parking area and driveway. I always throw down a scrap of plywood when I have to assume the praying position.

4 жыл бұрын

Yep. Specially summer time in shorts.. 👍😂

@akquicksilver

4 жыл бұрын

@ That's way too manly for me!

Very good project, I want to make one for myself. Greetings from Argentina

Really cool video. I admire the engineering creativity. I’ll have to build me one now. 😃

Good idea, well designed & v skillfully made. [set new standard for me to work towards!]

Thanks, you gave me an idea to tie my jackstand pair together.

Excellent and great idea. Your stick welding is pro! 👌👍

4 жыл бұрын

Thanks!

très bonne idée, bien réalisé et surtout très pratique, 👍👏 .Merci pour le partage 😉

When lifting on the side keep your extensions out as far as possible so the jack stands are close to the wheels as possible This will make it more stable and also reduce the risk of body stresses that could leave marks in your roof etc.

Nice job! You are an excellent fabricator.

3 жыл бұрын

Thank you very much for your nice comment!

Nice work. The accompanying music was very relaxing too

2 жыл бұрын

Thanks!

Awesome work👍👍👍 . Thanks for sharing. Awesome stick welding. Perfect continuous welds. What are you a perfectionist. LOL.

4 жыл бұрын

Thanks! Not a perfectionist, i just like finnishing. 😊

Another great DIY project!!! I like to watch your videos, You are very skilled.

4 жыл бұрын

Thanks. Have you already got the packet?

@Tule54

4 жыл бұрын

No, it haven't turned up yet. What day did you send it?

4 жыл бұрын

Its about a week ago. I'll check the day.. It was heavier than i expected, so it comes as a cargo.

4 жыл бұрын

I mailed you a tracking link. You should get it within a week.

Great work. Also, thanks for the music.

Great job as always buddy . Take care .

4 жыл бұрын

Thank you very much Glen! You too buddy, be safe!

Looks amazing! I must say I was a bit suspicious (initially only saw the photo), because the arms looked somewhat weak, but after seeing the video, I know I was wrong - it is, not only beautiful, but a very capable tool. Well done!

4 жыл бұрын

Thank you. 😊 That jack is so big that it makes arm looks small. Jack is 3 1/3 feet long and weights 45 kg. Lifts 3 tons

Damn Good! And your welding is excellent. 👍

This is called professional work very nice

I really like the design of the stands. WIll make me one soon Finnish Guy.

Excelente base para cargar autos mi estimado, felicitaciones 🍾

Another awesome build with great vid editing!

4 жыл бұрын

Thanks!

Awesome build I'll take a set.

Great project! I love it

4 жыл бұрын

Thanks mate!

Idea is: That you can lift one side, whole front or rear up. With one jack = one lift, and then place jack stands under the support. Leaves axles free, allows working with drivetrains, suspension etc.. Making takes about a day, used surplus material, so costs we're less than 20$ for me. Width can be adjusted. Optimal lifting point can be found from every car. ( very most of them ) Biggest reason to make this thing, was that our kids are using my tools when they are fixing their cars. I don't wan't them to use wood block aids for lifting or stands that are unsure. Of course, i have several bought stands too. None of them can be placed firmly under this kind of lifting support. So, i made a specific stands for it, to get safe and quick to use way to lift a car. I use bought stands for extra safety instead, and place them under the skirt just in case. Always use several stands, if you are working under the car! Structure is tested with 8 ton press. So, it holds easily 2 ton car.

Pretty Nice metal work! 👍 The construction is really well thought out!

4 жыл бұрын

Thanks!

Excellent idea, great job 👍

4 жыл бұрын

Thanks mate!

Mate, that is genius. 👍🏽 What a fantastic idea. 👌🏽

4 жыл бұрын

Thanks buddy. I noticed that i need to be under someones car atleast once a month. Wanted to have simple solution to lift any car up without need to wast time for searching a place for the jack or stands.

@Bill.L.Carroll

4 жыл бұрын

@ And when you don't have the right tools, you make them! 👌🏽 Hehehe 😆😂 You definitely have some awesome skills, mate 👍🏽

Nobody "loves" their projects like you do, they are all like your children.☺

Amazing job. Congratulations!

4 жыл бұрын

Thanks!

Me agrado tu video,muchas grasias prf.¡.😊❤

Awesome idea

Slt very Very good job monsieur technicien excellent formation merci beaucoup.

Magnífico seu trabalho meu amigo ficou show parabéns

Clever as always!

Wow, excellent! I'll have a pair please!

Great work.

Nice design and final product. I need two of these for my Tesla Model 3P to get all 4 wheels off the ground!

@4ehano

3 жыл бұрын

Any way to get your plans? The "Instructables" link doesn't work for me. Or how much for you to make and ship to Hawaii?

Lumoavaa katsottavaa! Todella hyvin tehty video... ei voi muuta kuin ihailla tuota tarkkuutta ja täsmällisyyttä! 🇫🇮🎅🏻👍🏻

4 жыл бұрын

Paljon kiitoksia. Kiva kun tykkäsit. Olen pyrkinyt näkemään vähän enemmän vaivaa videoiden kanssa. Edellinen tosin oli sellainen pikainen "heitto" kun itse aihekin oli vähän sellainen, että viitsiikö tehdä videota lainkaan. Yksi valokuva kun olisi ajanut asian, useimmille.

Impressed...and subbed. And then I notice your channels name...greetings from Finland...hauska tavata!

3 жыл бұрын

Tervehdys. Ja kiitoksia!

Genius idea

Boa dica de construção de ferramentas de precisão.

Very nice solution! I need to build something like this for my Saab. Saabs are really tricky to lift.. No real good lifting points for any other jack than the original one that comes with the car.

4 жыл бұрын

I had a Saab 96 Gl v4 long time ago. Now, i regret that i sold it away with a couple pennies. It would have been nice restoring project for long winters.

Very nice, your quite the fabricator.

4 жыл бұрын

Thanks!

This is a great video your skill level is amazing... The music starts off great and then you get into the touchy feeling music and I had to just mute the video at that point.... Big fan though, great job

Nice work.

Не ну что , очень круто , молодец мужик, руки и голова работают как надо , лайк!

4 жыл бұрын

благодарю вас

me gusto tu mucho tu video muy bueno lastima que no le hayas puesto las medidas y que material usaste para copiar esta idea que esta buena, espero lo edites para todos aquellos no somos muy entenddos en el tema. te mando saludos desde argentina.abrazos

Almost speechless. An epic build in a day. Those end caps looked like they were poured on...Wow! You never cease to amaze with your design and fab skills as well as your videography and music choices...Inspiring. Nice to hear you are using Adobe. My knees hurt thinking about the gravel driveway though. ;-P Hat Tip & Nod, my friend!

4 жыл бұрын

Thanks mate. ❤️ I have some issues with the Adobe at the moment. After update it started to stuck all the time. Reinstalling didn't help. Needs to figure it out, otherwise i like it.

@pjhalchemy

4 жыл бұрын

@ believe me I've had my issues with it too but it has lots of goodies built in.

4 жыл бұрын

@@pjhalchemy Yep. I try another installation, and leave updates out for until they release patch for it.

4 жыл бұрын

It was Windows update KB4556799 that messed up my video pc. Now it works smooth again. 👍

@pjhalchemy

4 жыл бұрын

@ Ain't that the way of Personal Computing! @¿@ Thanks for the tip!

well done!

Brilliant!

Exactly what I’ve been looking for. I need 2 sets how can I about buying some

Great Project Tuomas, I hope you don't have any breakdowns and have to use it any time soon. The finish ( painting) also make it a more than usual professional job. Your filming and editing are also improving in great steps. I agree with Kaveman, the welds are just amazing, and really liked the sequence where the arc was showing in yellow light. Very artistic :)

4 жыл бұрын

Thank you Peter. I decided to pay more attention for the actual video too. It takes much more time, but i hope one day its worth it. Also, i decided to make videos from "ordinary" things too, like making garden swing and things like that.

@cobberpete1

4 жыл бұрын

@ I'm sure a lot of your subscribers will be looking forward to the 'Ordinary' projects :)

I have one of these jack stand supports too...its a lump of 4x2 pine.

Plans: Is it possible to get the engineering plans?

Hola job Thanks for share!

Do you sell them as well?

how much does it cost? Amazing. This is a really good idea. Very safe!

Hi, can you give me the project too?

Top muito bom parabéns.

what item is the green polish disc for iron? Thanks

2 жыл бұрын

www.3m.com/3M/en_US/p/d/b5005028018/

Парень, ты крут! привет из Сибири!

Просто отличное приспособление, прям фабричное

Good stuff!

4 жыл бұрын

Thanks!

Ok that’s awesome 👏

Perfect

надо было немного длиннее, чтоб раздвигались шире, для устойчивости

Is there a way you could show us how much it holds and its breaking point?

3 жыл бұрын

I have lifted 2.5 ton car several times, without it even bending.

@franciscoayon9470

3 жыл бұрын

@ what you think would be the max it could withstand,I got a almost 3 ton suv

Great project link to materials, dimesions ,etc is not working for me

3 жыл бұрын

Yep. That page doesn't exist anymore. Sorry.

What is the drill you're using?

4 жыл бұрын

Bosch pbd 40 www.bosch-diy.com/fi/fi/p/pbd-40-0603b07000-v100026581

Is it possible to build me one

Mahtava projekti. Vastaava pitäisi omaankin käyttöön yrittää tehdä.

4 жыл бұрын

Kiitti.

Интересная мысль!

Perfekt 👌

Wow I'm impressed whats the name of that tool @0:45??

3 жыл бұрын

Tig welder.

Чудовий ліфт!

awesome! :D

4 жыл бұрын

Thank you. 😊

Pidän videoista. Haluatko opettaa minulle hitsauksen? Thanks.

just a fantastic jobs

4 жыл бұрын

Thanks!

super!!!

Totally frikin awesome dude hellyeah

4 жыл бұрын

👍

@danojames8329

4 жыл бұрын

@ i waz wanderin if I can get dimensions and sizes i want to make one

4 жыл бұрын

@@danojames8329 I am making instructable with measures atm. I post the link later today.

4 жыл бұрын

@@danojames8329 Here: www.instructables.com/id/Lifting-Support-and-Jack-Stands-for-Car-Lifting/

The pins seem too thin for me

3 жыл бұрын

Pins are stainless 316. It takes more than 20 tons to broke the pin, when it carries weight from both sides of the stand.

👍👌

good good

Gravel is alwas the right underground for safe lifting a car, or???😉😂😂😂

Do you sell your jacks?or just a hobby, I’ll be willing to buy some if you do.

4 жыл бұрын

I just made a pair for my own use. Just a hobby. I do videos about making things that i need, or sometimes just to test the idea.

Olipas hyvä idea ! Terv lätäkön toiselta puolelta Bengt

4 жыл бұрын

Tack så mycket!

Fenomenale

Perpect....

Badass bude

👍👍👍👍👍👍👍👍👍👍👍👍

But... Some measures?? A kind of project ????? :-(

i would not watch such a vid

3 жыл бұрын

Why not?

@johnsmith-wl8dp

3 жыл бұрын

@ i watch to learn, and make use of what i learn, i spent 60 years of my life as a mechanical engineer and i could not understand any thing from this video. annoying. snap shots and awful music

3 жыл бұрын

@@johnsmith-wl8dp Aah. Yep, my videos are for people with some experience about actual fabricating. I just share the idea, not teach anything.

Музыка. Отстой полный.

Very useful thing! Add to Favourites!) Many thanks!

3 жыл бұрын

Thank you for the nice comment!