Awesome video. Do you fly 1s or 2s? Ordered mine and want to make sure 2s is ok in it. Thanks 😊

@lewiemotorsports3616

11 ай бұрын

I fly mostly on 1s, I'll use a 750-900 mah 50c. I've only tried 2s once and on full throttle it cut the esc off. I don't think these are brushless motors either

@genodesan4954

11 ай бұрын

Thanks 👍

@theoztreecrasher2647

9 ай бұрын

Fly it ONLY with the type of battery supplied with it! You CANNOT use a 2-cell battery in an RC toy designed for a 1-cell battery (you'll blow up the flight board!) or vice versa. (The Low Voltage Cut-off circuitry will not allow the plane to fly on the low voltage.) The units of this plane now being offered for sale appear to all be 2-cell brushed motor versions. It seems that some folks have older units that were sold with 1-cell boards and motors? If so DON'T mix them up! 🙄😉

@lewiemotorsports3616

9 ай бұрын

@theoztreecrasher2647 yeah, I figured that out a while ago. I went with a 1s jst 850 mah 30c battery i got off Amazon, this produces the best results for flight time and performance. I have another j20 i got to customize, Gonna share vids of the build and flight once complete 💪🏽

@Youngmccarty

8 ай бұрын

@@lewiemotorsports3616please post a video on the custom j20

บินตีลังกา ควงสว่านได้มั้ย

why you need add weight?

@lewiemotorsports3616

Жыл бұрын

If you don't it will tend to be tail heavy and because it's a delta wing you'll stall hard while trying to turn sharply. The weight helps keep the nose down and give it more speed.

@KayDaJinashi

Жыл бұрын

@@lewiemotorsports3616 how much grams you add it??

@lewiswhitfield4362

10 ай бұрын

Hey man how much weight did you add? And how did you add it? Mine just wants to keep climbing, I have to do full down to just keep it level and I need to pull up hard in turns otherwise it’ll sorta try flat spin and fall

@lewiemotorsports3616

10 ай бұрын

@lewiswhitfield4362 I added 2 screws behind the nose cone, and it still tends to climb but I like to fly in mid rates (mode b on the rtf) and once she gets a good altitude I dial down the throttle to about 60% the screws helped to balance her out. Also I run a slightly heavier battery now. This plane looks amazing but the cg is terrible out of the box.

@lewiswhitfield4362

10 ай бұрын

@@lewiemotorsports3616 what size screws did you add, would you mind sending a photo? Of where you put them and the rough size? :)

do u have video abt this rc doing barrel flip?

@lewiemotorsports3616

Жыл бұрын

I don't yet, but I will attempt on mode 3 and see what happens!

@KayDaJinashi

Жыл бұрын

​@@lewiemotorsports3616 any idea how to add some led light sir? im new into this

@lewiemotorsports3616

Жыл бұрын

@KayDaJinashi if there's an open port on the esc/servo board, you can plug some in, or get a led kit and run them off a separate 1s battery. The tricky part is fitting both batteries in the tray. I'd also look on Aliexpress or Amazon might have cheap kits as well