i did not caulk in the deck because the motor still has to be mounted . hopefully this helps
Жүктеу.....
Пікірлер: 25
@cubaniton744 жыл бұрын
Thank you for the DIY video. I did remove some material off my rear deck, but used hand tool only, a rounded file, and kept testing time after time, so avoid removing too much material, it ended up looking nice, thanks to your inspirational video. God bless you.
@darthvader68474 жыл бұрын
Where do I get the deck from
@ronhart41667 жыл бұрын
Looking good. Tip for you. Buy yourself a "scribing pencil" when you do your contours they will come out perfect. I hope to see the rest of your build :)
@thomasstrunk67202 ай бұрын
Where did you get your rear deck for the carolina skiff
@727allan727
2 ай бұрын
I got it from Manatee Marine and they ordered it from Carolina Skiff, but I do not believe believe Carolina skiff is making them anymore?
@1shawnv16 жыл бұрын
My seal at the edge where the deck meets the boat is older and coming off pretty bad, do you have any recommendations on what to use after I clean all the old stuff off? Thanks in advance for any advice!
@cubaniton74
4 жыл бұрын
Remove any material that does not feel solid, and rebuild it with layers of fiberglass and epoxy, then finish the last layer with Gelcoat.
@danielarnold27843 жыл бұрын
Where did you get it??
@boss_hoggbullys5 ай бұрын
Where did u get the deck pls
@727allan727
4 ай бұрын
Deck was from Carolina skiff but I’m not sure if they still sell them
@alexriveros29606 жыл бұрын
Where did you buy the back deck ?
@cubaniton74
4 жыл бұрын
Look for local Carolina Skiff dealers, they might have one available.
@99christyn3 жыл бұрын
Where can I order the front and rear deck?
@Pokemonballers876 жыл бұрын
What do you use to refinish that if it gets scratched I have some on my Seats id like to fix..
@cubaniton74
4 жыл бұрын
Use Gelcoat.
@rp3cpa7 жыл бұрын
where did you source the component parts (i.e. the Decks)? Manatee as well?
@727allan727
6 жыл бұрын
yes
@cubaniton74
4 жыл бұрын
Look for local Carolina Skiff dealers, they might have one available.
@hungnmiami5 жыл бұрын
Please tell me when sanding what grit do you start with I have an assortment and I'm not sure how heavy to start and how like to end up thank you in advance for your help
@727allan727
5 жыл бұрын
i actually used a ....1/4 in. x 1 in. Cylindrical Solid Carbide Burr Rotary File Bit with 1/4 in. Shank ...they also come in a set and they are very useful !
@bobby050606
5 жыл бұрын
@@727allan727 where did you source the back decks and front deck from?
@cubaniton74
4 жыл бұрын
@@bobby050606 Look for local Carolina Skiff dealers, they might have one available.
@cubaniton74
4 жыл бұрын
@ReelNauti-Cal I did remove some material off my rear deck, but I used hand tool only, a rounded file, and kept testing time after time, to avoid removing too much material, it ended up looking nice, thanks to Allans' inspirational video. God bless you.
@TattedSails5 жыл бұрын
Where did you buy the rear deck from? Is there a website?
@cubaniton74
4 жыл бұрын
Look for local Carolina Skiff dealers, they might have one available.
Пікірлер: 25
Thank you for the DIY video. I did remove some material off my rear deck, but used hand tool only, a rounded file, and kept testing time after time, so avoid removing too much material, it ended up looking nice, thanks to your inspirational video. God bless you.
Where do I get the deck from
Looking good. Tip for you. Buy yourself a "scribing pencil" when you do your contours they will come out perfect. I hope to see the rest of your build :)
Where did you get your rear deck for the carolina skiff
@727allan727
2 ай бұрын
I got it from Manatee Marine and they ordered it from Carolina Skiff, but I do not believe believe Carolina skiff is making them anymore?
My seal at the edge where the deck meets the boat is older and coming off pretty bad, do you have any recommendations on what to use after I clean all the old stuff off? Thanks in advance for any advice!
@cubaniton74
4 жыл бұрын
Remove any material that does not feel solid, and rebuild it with layers of fiberglass and epoxy, then finish the last layer with Gelcoat.
Where did you get it??
Where did u get the deck pls
@727allan727
4 ай бұрын
Deck was from Carolina skiff but I’m not sure if they still sell them
Where did you buy the back deck ?
@cubaniton74
4 жыл бұрын
Look for local Carolina Skiff dealers, they might have one available.
Where can I order the front and rear deck?
What do you use to refinish that if it gets scratched I have some on my Seats id like to fix..
@cubaniton74
4 жыл бұрын
Use Gelcoat.
where did you source the component parts (i.e. the Decks)? Manatee as well?
@727allan727
6 жыл бұрын
yes
@cubaniton74
4 жыл бұрын
Look for local Carolina Skiff dealers, they might have one available.
Please tell me when sanding what grit do you start with I have an assortment and I'm not sure how heavy to start and how like to end up thank you in advance for your help
@727allan727
5 жыл бұрын
i actually used a ....1/4 in. x 1 in. Cylindrical Solid Carbide Burr Rotary File Bit with 1/4 in. Shank ...they also come in a set and they are very useful !
@bobby050606
5 жыл бұрын
@@727allan727 where did you source the back decks and front deck from?
@cubaniton74
4 жыл бұрын
@@bobby050606 Look for local Carolina Skiff dealers, they might have one available.
@cubaniton74
4 жыл бұрын
@ReelNauti-Cal I did remove some material off my rear deck, but I used hand tool only, a rounded file, and kept testing time after time, to avoid removing too much material, it ended up looking nice, thanks to Allans' inspirational video. God bless you.
Where did you buy the rear deck from? Is there a website?
@cubaniton74
4 жыл бұрын
Look for local Carolina Skiff dealers, they might have one available.