J Perkins MB 339 Review

Ғылым және технология

A review of the unboxing, build and maiden flight of this Aermacchi MB-339 by J Perkins models. his 50mm EDF (ducted fan) ARTF model is for 3 channel RC and intermediate model flyers. It is powered by a 3 cell 1800 - 2200 mAh Lipo. It also sports a clear canopy which might work well for First Person view ( FPV ) installations.
Length: 825mm / 32.5in
Wingspan: 800mm / 31.4in
Motor: Brushless 2627 4900KV 50mm 11-blade fan.
Servos: 3x 9g analogue.
ESC: 1x 40A with XT60 connector
Build (0:49)
Flights (3:45)
Conclusions (6:36)
Steve Webb Models;
www.stevewebb.co.uk/

Пікірлер: 18

  • @workonesabs
    @workonesabsАй бұрын

    I got one. Additional work I did was 3D printing two jet pilots to 40mm high, painting the white parts with Humbrol enamel to match the grey paint and engine outlet black and gun metal. Battery I use is 1450 4S 50c lipo, much better and get 3 mins of full throttle flight. The stock motor and esc can take 4s and like the Arrows some are on 4s and the Viper has had 100s of flights on 4s and no problem. Best to use 50c lipos and they are not too warm.

  • @ScaleMeDown

    @ScaleMeDown

    Ай бұрын

    I must mod mine to include some pilots like yours. Glad you like the video

  • @lewiemotorsports3616
    @lewiemotorsports3616Ай бұрын

    I appreciate this video esp for the build. Im also glad to see you use the ar410, non gyro. Instills confidence when i build mine cheers

  • @ScaleMeDown

    @ScaleMeDown

    Ай бұрын

    Thanks. I much prefer how these little jets fly without a gyro. I appreciate a well set up gyro with high quality fast, precise servos can transform a model, however IMHO these little jets are better without.

  • @TAT660X
    @TAT660X4 ай бұрын

    Cool looking little plane 😎

  • @ScaleMeDown

    @ScaleMeDown

    4 ай бұрын

    Thanks. It is great fun to fly.

  • @leohcheung
    @leohcheung2 ай бұрын

    CA on foam may or may not be strong enuf for that joint. If you dont have foam glue, UHU POR from the stationery shop may be a better option…or anything that melts the foam a little so the wing is joined to the fuse as one piece.

  • @ScaleMeDown

    @ScaleMeDown

    2 ай бұрын

    I have always found medium CA & activator more than strong enough for these models. Has held up well for many flights.

  • @larrylutsky181
    @larrylutsky1812 ай бұрын

    I have this plane and like it very much. I fly mine on a 4s 1300. I think it is lighter and flies better.

  • @ScaleMeDown

    @ScaleMeDown

    2 ай бұрын

    Thanks

  • @workonesabs

    @workonesabs

    Ай бұрын

    ...even better on a 4s 1450!

  • @JakeBullit123
    @JakeBullit1234 ай бұрын

    Did you have to trim the ailerons to attach the tip tanks,? Also did your ESC not start beeping on 4s?

  • @ScaleMeDown

    @ScaleMeDown

    4 ай бұрын

    ESC was fine without reprogramming on 4s (flight pack got very hot on this setup though). No, my ailerons did not need any trimming to clear the tip tanks.

  • @iBele.
    @iBele.4 ай бұрын

    Is there a version with the frecce tricolori livery?

  • @ScaleMeDown

    @ScaleMeDown

    4 ай бұрын

    Hi, not to my knowledge - you will have to repaint yourself. 🙂

  • @iBele.

    @iBele.

    4 ай бұрын

    Ok, thx anyways!

  • @Ryanniar
    @Ryanniar3 ай бұрын

    Does it have retractable landing gear?

  • @ScaleMeDown

    @ScaleMeDown

    3 ай бұрын

    No it is a hand launch (chuck) and belly land

Келесі